[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Linphone-users] video troubles: sip number to test video?

From: Franck Danard
Subject: Re: [Linphone-users] video troubles: sip number to test video?
Date: Sat, 26 Feb 2011 16:15:46 +0100
User-agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; fr; rv: Gecko/20101207 Thunderbird/3.1.7

Hi all.

I made some test with the lastest Linphone version, on Elastix (Asterisk 1.4).
This configuration including a GXV3601 (Gateway video / sip Grandstream), a eyebeam 1.5.
I use h264 codec.
I've an Samsung Galaxy S with the lastest Android version.

I can use only the h264 codec. Good, Linphone seems right do it, but no. :-[
When I call Linphone, or I receive a call from Eyebeam, the video is bad, and Linphone is freezing.
When I call the GXV3601, I can see anything. However it's a H264 codec.
About audio codec, i use only the gsm.

Just to forwarding my experience. ;-)

Else, Linphone will be a good application to me, when the video will be ready to work. :-)


Franck Danard

Le 26/02/2011 15:29, Liviu Andronic a écrit :
On Sat, 26 Feb 2011 13:58:31 +0100, Dragos D <address@hidden> wrote:

You have to install libssl and libssl-dev

Now I enabled H264 on both computers, but the video issues persist. On both computers the up speed averages 10 kbytes/s, which I understand isn't nearly enough for video, although the upload speed limit is set to 128kbytes/s; sometimes the image is acceptable, but much of the time it is not. Testing SIP Communicator in similar conditions (same internet connection, same video codec) I get better results, with up speeds ranging from 20 to 60 kbytes/s.

Am I doing something wrong? Could there be a bug in linphone limiting the up speed? How could I check that? Regards

Linphone-users mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]