On Fri, Dec 4, 2009 at 10:31 PM,
<address@hidden> wrote:
Send Linphone-users mailing list submissions to
address@hidden
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.nongnu.org/mailman/listinfo/linphone-users
or, via email, send a message with subject or body 'help' to
address@hidden
You can reach the person managing the list at
address@hidden
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Linphone-users digest..."
Today's Topics:
1. Build error while using linphone (vivek tambakad)
2. Re: where does this ?received? come from? (Lars T?uber)
3. Re: Build error while using linphone (Alastair Johnson)
4. Re: where does this ?received? come from? (Lars T?uber)
----------------------------------------------------------------------
Message: 1
Date: Fri, 4 Dec 2009 13:00:57 +0530
From: vivek tambakad <address@hidden>
Subject: [Linphone-users] Build error while using linphone
To: address@hidden
Message-ID:
<address@hidden>
Content-Type: text/plain; charset="iso-8859-1"
Hi ,
I am compiling linphone for the compulab Em-x270 xsacle board.I
get following errors in openembedded with the
"bitbake linphone" command.
NOTE: Task failed: Error:
/home/vivek/development/em-x270/stuff/openembedded/recipes/linphone/linphone-3.1.0/./b64_assert.patch
not found.
ERROR: TaskFailed event exception, aborting
ERROR: Build of
/home/vivek/development/em-x270/stuff//openembedded/recipes/linphone/
linphone_3.1.0.bb do_patch failed
ERROR: Task 4
(/home/vivek/development/em-x270/stuff//openembedded/recipes/linphone/
linphone_3.1.0.bb, do_patch) failed
Please guide me in this
Regards
vivek tambakad
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.gnu.org/pipermail/linphone-users/attachments/20091204/d44e5c62/attachment.html
------------------------------
Message: 2
Date: Fri, 4 Dec 2009 11:39:50 +0100
From: Lars T?uber <address@hidden>
Subject: Re: [Linphone-users] where does this ?received? come from?
To: address@hidden
Message-ID: <address@hidden>
Content-Type: text/plain; charset=UTF-8
Hi Simon,
On Mon, 30 Nov 2009 17:03:01 +0100 Simon Morlat <address@hidden> wrote:
> Hi Lars,
>
> Where did you get this Via header from ?
> Wireshark, linphone logs, server logs ?
it came from »linphonec -d1« log.
> I would be suprised it is in linphone logs: received= is set by servers
> (or the UAS part of the client, but not for registers since linphone
> does accept incoming registers).
At the moment I have no access to the tersting machine, but I'll test again with the registrar running on an different port. I suspect a transparent SIP proxy from the ISP in between, who changes the addresses silently.
I'll have a look with the kamailio running on a different port an report again.
> If it is in the server logs: it might be the server that adds it
> automatically to recall where to send the register's response back.
> If it is captured with wireshark running on the server's machine, then
> that would mean that there is some kind of poorly intelligent NAT
> between linphone and kamailio that is trying to make some SIP
> proxying....
> It arrives sometimes. sips (encrypted sip) would help in getting rid of
> these stupid nats, but it's not yet supported in linphone.
Is this on the todo list for the near future? BTW what about encrypted RTP?
Best regards
Lars
>
> Simon
>
> Le mercredi 25 novembre 2009 à 12:45 +0100, Lars Täuber a écrit :
> > Hi Bent,
> >
> >
> > On Wed, 25 Nov 2009 10:38:13 +0100 Bent Bagger <address@hidden> wrote:
> > > Lars Täuber wrote:
> > > > 192.168.178.20:6060;rport=6060;branch=z9hG4bK2125513909;received=77.186.81.20^M
> > > >
> > > > Where does this received IP-address come from?
> > > >
> > > A lookup of the recieved IP gives this:
> > >
> > > address@hidden:~> dig -x 77.186.81.20
> > [...]
> > >
> > > Does that give you any clue? Your ISP/SIp registrar?
> >
> > no thanks. My question was not clear enough, sorry.
> > I meant where does linphone get to know about this ip-address from?
> >
> > Linphone contacts a sip registrar that I'm running myself (kamailio) but it registers a different ip address than it should be. The NATted address is similar (from the same subnet) but not the one that's mentioned in the received=.... line. That's why the registrar registers this client with a wrong address. That's one of my problems.
> >
> > So my conclusion is there is an additional transparent application level firewall from my provider in between, or what?
> >
> > Thanks
> > Lars
> >
> >
> > _______________________________________________
> > Linphone-users mailing list
> > address@hidden
> > http://lists.nongnu.org/mailman/listinfo/linphone-users
>
--
Schöne Grüße
Lars Täuber
------------------------------
Message: 3
Date: Fri, 4 Dec 2009 10:53:37 +0000
From: Alastair Johnson <address@hidden>
Subject: Re: [Linphone-users] Build error while using linphone
To: address@hidden
Message-ID: <address@hidden>
Content-Type: Text/Plain; charset="iso-8859-15"
On Friday 04 December 2009, vivek tambakad wrote:
> Hi ,
> I am compiling linphone for the compulab Em-x270 xsacle board.I
> get following errors in openembedded with the
> "bitbake linphone" command.
>
> NOTE: Task failed: Error:
> /home/vivek/development/em-x270/stuff/openembedded/recipes/linphone/linphon
> e-3.1.0/./b64_assert.patch not found.
> ERROR: TaskFailed event exception, aborting
> ERROR: Build of
> /home/vivek/development/em-x270/stuff//openembedded/recipes/linphone/
> linphone_3.1.0.bb do_patch failed
> ERROR: Task 4
> (/home/vivek/development/em-x270/stuff//openembedded/recipes/linphone/
> linphone_3.1.0.bb, do_patch) failed
>
> Please guide me in this
This is an OE bug. There is either an error in OE's bitbake recipe, or a
missing file in the OE tree. The recipe is telling bitbake to patch the
linphone source with patch file
openembedded/recipes/linphone/linphone-3.1.0/b64_assert.patch but the file
isn't there. You can edit the recipe
openembedded/recipes/linphone/linphone_3.1.0.bb to remove the offending
reference:
SRC_URI =
"http://download.savannah.nongnu.org/releases/linphone/3.1.x/sources/linphone-${PV}.tar.gz
\
file://b64_assert.patch;patch=1 \ << remove this line
file://preferences-segv.patch;patch=1 \
"
------------------------------
Message: 4
Date: Fri, 4 Dec 2009 12:52:31 +0100
From: Lars T?uber <address@hidden>
Subject: Re: [Linphone-users] where does this ?received? come from?
To: address@hidden
Message-ID: <address@hidden>
Content-Type: text/plain; charset=UTF-8
Hallo again,
On Fri, 4 Dec 2009 11:39:50 +0100 Lars Täuber <address@hidden> wrote:
> I'll have a look with the kamailio running on a different port an report again.
with kamailio running on a different port this problem is gone. The ip address in the received line is the one from the natting firewall.
So I conclude it really was a sip-proxy in the network of the ISP processing traffic to port 5060.
It's often like this, I need to explain my problem to someone else to get the right ideas.
Thanks everybody
Lars
------------------------------
_______________________________________________
Linphone-users mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/linphone-users
End of Linphone-users Digest, Vol 85, Issue 3
*********************************************