[Linphone-developers] Re: [Linphone-users] new linphone-1.0.0pre3

[Simon MORLAT]

Hello,

The log message you attached is from linphone-0.12.1:

| INFO1 | <udp.c: 295> Sending message:
REGISTER sip:192.168.223.5 SIP/2.0
Via: SIP/2.0/UDP 192.168.223.101:5060;branch=z9hG4bK3341652141
From: <sip:address@hidden>;tag=568220672
To: <sip:address@hidden>;tag=568220672
Call-ID: address@hidden
CSeq: 0 REGISTER
Contact: <sip:address@hidden>
max-forwards: 10
expires: 900
*user-agent: oSIP/Linphone-0.12.1*
Content-Length: 0


I think there's a problem with your installation. Use ./configure 
--disable-shared if you have doubts about the shared libraries that are 
installed on your system.
Simon


John A. Sullivan III wrote:

> Hello and thank you, Simon.  I just compiled and installed 1.0.0pre3
> along with libosip2-2.2.0 and, as soon as I tried to run it, it seg
> faulted.  I'm on RedHat 9.0 with both GNOME and KDE.  Here's the screen
> output:
>
> address@hidden download]$ linphone
> | INFO1 | <osipua.c: 65> Starting osip stack and osipua layer.
>
> | INFO1 | <udp.c: 112> Entering osipua thread.
>
> MediaStreamer-Message: Found /dev/dsp.
> MediaStreamer-Message: Found ALSA device: Intel 82801BA-ICH2
> ALSA lib pcm_hw.c:1155:(snd_pcm_hw_open) open /dev/snd/pcmC0D0p failed:
> Device or resource busy
>
> (linphone:30393): MediaStreamer-WARNING **: alsa_card_open_w: Error
> opening PCM device plughw:0,0
>
> | INFO1 | <osipmanager.c: 148> port already listened
>
> | INFO1 | <utils.c: 409> Outgoing interface to reach 192.168.223.5 is
> 192.168.223.101.
>
> Executing transaction...
> LinphoneCore-Message: Registration sent.
>
> | INFO1 | <osipmanager.c: 148> port already listened
>
> | INFO1 | <udp.c: 295> Sending message:
> REGISTER sip:192.168.223.5 SIP/2.0
> Via: SIP/2.0/UDP 192.168.223.101:5060;branch=z9hG4bK3341652141
> From: <sip:address@hidden>;tag=568220672
> To: <sip:address@hidden>;tag=568220672
> Call-ID: address@hidden
> CSeq: 0 REGISTER
> Contact: <sip:address@hidden>
> max-forwards: 10
> expires: 900
> user-agent: oSIP/Linphone-0.12.1
> Content-Length: 0
>
>
> | INFO1 | <udp.c: 186> info: Message from 192.168.223.5:5060
>
> | INFO1 | <udp.c: 206> info: RECEIVING UDP MESSAGE:
> SIP/2.0 100 Trying
> Via: SIP/2.0/UDP 192.168.223.101:5060;branch=z9hG4bK3341652141
> From: <sip:address@hidden>;tag=568220672
> To: <sip:address@hidden>;tag=568220672
> Call-ID: address@hidden
> CSeq: 0 REGISTER
> User-Agent: Asterisk PBX
> Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER
> Contact: <sip:address@hidden>
> Content-Length: 0
>
>
>
> | INFO1 | <nict_callbacks.c: 42> OnEvent_New_Incoming1xxResponse!
>
> Multiple segmentation faults occurred; can't display error dialog
>
>  



_______________________________________________
Linphone-developers mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/linphone-developers