[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Linphone-users] success with sipomatic

From: Simon Morlat
Subject: Re: [Linphone-users] success with sipomatic
Date: 22 Mar 2002 16:42:27 +0100


Linphone opens /dev/dsp, which is often a link to /dev/dsp0 on most
computers. Change /dev/dsp to point on what you want to use the good
sound card. 
I know this is not very elegant. Further versions will have a box to
choose the audio device.
According to your next mail, I think there is serious bug (crash) in
linphone. I'm going to investigate and try to reproduce the crash, that
may cause also the trouble when working with sipomatic.
Thanks for all.
I will send you a message and to the list too when I'll have fixed it.

le jeu 21-03-2002 à 21:33, Dmitri Pogosyan a écrit :
> O'K I got sipomatic
> reply with your message
> with pre2 version ! Thanks !
> I have to launch linphone first, and
> then sipomatic to have robot to
> reply.  Othervise it is invited but never replies.
> Back to my audio setup debugging.
> Choosing 'micro' as the source which
> /dev device is used ?
> I have a microphone on my webcam
> (which works in other applications) which is at /dev/dsp1
> while the mic jack on my card probably
> corresponds to /dev/dsp0
> (I.e doing cat /dev/dsp1 > /dev/dsp0 I can speak
> in the microphone and hear my voice from the speakers).
> Can I make linphone to use /dev/dsp1 for input ?
> (I don't see and option for this, but
> I can change a code, if I know what to do)
>       Thanks, Dmitri
> _______________________________________________
> Linphone-users mailing list
> address@hidden

reply via email to

[Prev in Thread] Current Thread [Next in Thread]