[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Linphone-developers] howto disable/subpress rtcp media attribute in

From: Sebastian Gunreben
Subject: Re: [Linphone-developers] howto disable/subpress rtcp media attribute in INVITE [SOLVED]
Date: Wed, 8 Apr 2015 18:55:15 +0200
User-agent: Mutt/1.5.21 (2010-09-15)

Hi Johan, all,

finally, I was able to solve my problem.
The parameter rtcp_enabled=0 in the [rtp] section prohibits sending the
rtcp media attribute _only_ (and that is the trick), if firewall_policy
is not stun.

If firewall_policy=stun, then the parameter rtcp_enabled=0 does not
work. Independent of its setting 1 or 0, a=rtcp is always present in the 
INVITE message.

It remains the question, if this is intended.

Best regards,

On Wed, Apr 08, 2015 at 11:41:32AM +0200, Johan Pascal wrote:
> Hi Sebastian,
> in the linphone config file setting rtcp_xr_enabled to 0 in the
> section [rtp] shall do it.
> regards,
> johan
> On 06/04/15 18:42, Sebastian Gunreben wrote:
> >Hello!
> >
> >linphone is great! I am using linphone for voice testing. So especially
> >the command line release satisfieds my needs.
> >With respect to one of my testing environments, I need to disable the
> >media attribute "a=rtcp" in the media description part of the INVITE message.
> >
> >Is there an option on the config file, which allows that the a=rtcp
> >attribute is not exchanged in the INVITE?
> >
> >Thank you in advance!
> >
> >Best regards,
> >Sebastian
> >
> _______________________________________________
> Linphone-developers mailing list
> address@hidden

Dr. Sebastian Gunreben
gpg: 0xC2DF4FDD

reply via email to

[Prev in Thread] Current Thread [Next in Thread]