[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Linphone-developers] Video Stream ,linphone 3.7

From: Anson Tai
Subject: [Linphone-developers] Video Stream ,linphone 3.7
Date: Wed, 22 Oct 2014 13:53:00 +0800

Dear All:
   I am using TI DM36x series,  DSP based , ported with v4l2.

  but still can't get the video.

  there has some log here.
  -->ortp-message-Setting DSCP to 0 for video stream


linphonec> call 1002
ortp-message-Flattened number is '1002'
ortp-message-Call 0x45558: moving from state LinphoneCallIdle to LinphoneCallOutgoingInit
Establishing call id to sip:address@hidden, assigned id 1
ortp-message-Contact has been fixed using proxy
ortp-message-Setting DSCP to 46 for audio stream.
ortp-warning-cannot set noise gate mode to [0] because no volume send
ortp-message-Setting DSCP to 0 for video stream.
ortp-message-ms_filter_link: MSRtpRecv:0x55178,0-->MSVoidSink:0x52a40,0
ortp-message-Priority used: 99
ortp-message-Audio MSTicker priority set to SCHED_FIFO and value (99)
ortp-message-[sip:address@hidden calling [sip:address@hidden on op [0x4ab30]
ortp-message-Changing [client] [INVITE] transaction [0x55d80], from state [INIT] to [CALLING]
ortp-message-channel [0x31dd0]: message sent to [UDP://], size: [967] bytes

Do I need to use the v4l2-ctl to reconfig the /dev/video0 ? 
my camera is 5M resolution. 

Thanks you


reply via email to

[Prev in Thread] Current Thread [Next in Thread]