Re: [Linphone-developers] Not beeing able to send video (linphone 3.0.0)

[Simon Morlat]

Hi Conrad,

>
> The verbose log shows the following interesting error message:
>
> linphone-error : could not find encoder for codec id 5

This is the problem, and the problem is in libavcodec (ffmpeg). In debian they 
have disabled video encoders (but kept decoders of course) because of patents 
issues. They probably did the same in ubuntu.
You 'll have to rebuild a ffmpeg and install it in /usr/local for example, 
then rebuild linphone on top of it. I suggest that you first remove 
libavcodec-dev, libswscale-dev, libavutil-dev, libavformat-dev before doing 
that.
There is no way to detect that situation at compile time. But linphone should 
probably hide the misworking codec in the configuration box. In that case you 
would have at least theora or snow to be used. But as those codec aren't very 
interroperable with the rest of the world, and not very performant/stable. 
The open source world is lacking a fully functionnal/stable/performant free 
video codec such as speex is in the audio domain.

Simon


>
>
> That's for h263-1998 (different ids for different codecs - it`s not the
> h263 only) Attached see a full log of a LAN call.
>
> Details:
> - linphone stable 3.0.0 (had to configure with --disable-strict)
> - all libraries from ubuntu 8.04
>
> Thank you so much for your help. It would be nice to get the eee to work.
>
> Conrad
>
> linphone-message : Registering all filters...
> linphone-message : Registering all soundcard handlers
> linphone-message : Card ALSA: default device added
> linphone-message : Card ALSA: HDA Intel added
> linphone-message : Card OSS: /dev/dsp added
> linphone-message : Card OSS: /dev/dsp added
> linphone-message : Registering all webcam handlers
> linphone-message : Webcam V4L2: /dev/video0 added
> linphone-message : Webcam V4L: /dev/video0 added
> linphone-message : Webcam StaticImage: Static picture added
> linphone-message : Loading plugins
> linphone-message : Cannot open directory
> /usr/local/lib/mediastreamer/plugins: No such file or directory
> linphone-message : ms_init() done
> linphone-message : DNS resolution with 0.0.0.0:5060
> linphone-message : getaddrinfo returned the following addresses:
> linphone-message : 0.0.0.0 port 5060
> linphone-message : eXosip: Reseting timer to 15s before waking up!
> linphone-message : v4lv2: V4L2_PIX_FMT_YUYV choosen
> linphone-message : Size of picture is 352x288
> linphone-message : ms_filter_link:
> MSV4L2Capture:0xa03faa8,0-->MSPixConv:0xa03fc78,0 linphone-message :
> ms_filter_link: MSPixConv:0xa03fc78,0-->MSVideoOut:0xa03fbb0,0
> linphone-message : Using yuv overlay.
> linphone-message : YUV overlay using hardware acceleration.
> linphone-message : v4lv2: V4L2_PIX_FMT_YUYV choosen
> linphone-message : Size of picture is 352x288
> linphone-message : V4L2 video capture started.
> linphone-message : Received message:
> BYE sip:address@hidden:5060 SIP/2.0
>
> Via: SIP/2.0/UDP 192.168.2.15:5060;rport;branch=z9hG4bK2776
>
> From: Conrad Beckert <sip:address@hidden>;tag=24464
>
> To: Conrad <sip:address@hidden>;tag=1262173420
>
> Call-ID: 816241320
>
> CSeq: 21 BYE
>
> Contact: <sip:address@hidden:5060>
>
> Max-Forwards: 70
>
> User-Agent: Linphone/3.0.0 (eXosip2/3.1.0)
>
> Content-Length: 0
>
>
>
>
> linphone-message : Message received from: 192.168.2.15:5060
> linphone-message : Message received from: 192.168.2.15:5060
> linphone-message : MESSAGE REC. CALLID:816241320
> linphone-message : Message received from: 192.168.2.15:5060
> linphone-message : This is a request
> linphone-message : allocating transaction ressource 1 816241320
> linphone-message : allocating NIST context
> linphone-message : cb_rcvunkrequest (id=1)
> linphone-message : DNS resolution with 192.168.2.15:5060
> linphone-message : getaddrinfo returned the following addresses:
> linphone-message : 192.168.2.15 port 5060
> linphone-message : Message sent: (to dest=192.168.2.15:5060)
> SIP/2.0 481 Call Leg/Transaction Does Not Exist
>
> Via: SIP/2.0/UDP 192.168.2.15:5060;rport=5060;branch=z9hG4bK2776
>
> From: Conrad Beckert <sip:address@hidden>;tag=24464
>
> To: Conrad <sip:address@hidden>;tag=1262173420
>
> Call-ID: 816241320
>
> CSeq: 21 BYE
>
> User-Agent: Linphone/3.0.0 (eXosip2/3.1.0)
>
> Content-Length: 0
>
>
>
>
> linphone-message : cb_snd123456xx (id=1)
> linphone-message : eXosip: Reseting timer to 15s before waking up!
> linphone-message : eXosip: Reseting timer to 15s before waking up!
> linphone-message : in linphone_other_request
> linphone-message : Unsupported request received.
> linphone-error : eXosip: transaction already answered
> linphone-warning : We are late of 475 miliseconds.
> linphone-warning : We are late of 288 miliseconds.
> linphone-warning : We are late of 289 miliseconds.
> linphone-warning : We are late of 290 miliseconds.
> linphone-warning : We are late of 304 miliseconds.
> linphone-warning : We are late of 52 miliseconds.
> linphone-warning : We are late of 58 miliseconds.
> linphone-warning : We are late of 78 miliseconds.
> linphone-warning : We are late of 102 miliseconds.
> linphone-message : eXosip: Reseting timer to 15s before waking up!
> linphone-message : Notifying all friends that we are in status 5
> linphone-message : Partial MTU discovered : 1492
> linphone-message : Partial MTU discovered : 1492
> linphone-message : mtu to 192.168.2.15 is 1492
> linphone-message : Discovered mtu is 1492, RTP payload max size is 1432
> linphone-message : allocating transaction ressource 2 2084376213
> linphone-message : allocating ICT context
> linphone-message : DNS resolution with 192.168.2.15:5060
> linphone-message : getaddrinfo returned the following addresses:
> linphone-message : 192.168.2.15 port 5060
> linphone-message : Message sent: (to dest=192.168.2.15:5060)
> INVITE sip:address@hidden SIP/2.0
>
> Via: SIP/2.0/UDP 192.168.2.16:5060;rport;branch=z9hG4bK208675205
>
> From: Conrad <sip:address@hidden>;tag=508960452
>
> To: Conrad Beckert <sip:address@hidden>
>
> Call-ID: 2084376213
>
> CSeq: 20 INVITE
>
> Contact: <sip:address@hidden:5060>
>
> Content-Type: application/sdp
>
> Max-Forwards: 70
>
> User-Agent: Linphone/3.0.0 (eXosip2/3.1.0)
>
> Subject: Phone call
>
> Expires: 120
>
> Content-Length:   467
>
>
>
> v=0
>
> o=2003 123456 654321 IN IP4 192.168.2.16
>
> s=A conversation
>
> c=IN IP4 192.168.2.16
>
> t=0 0
>
> m=audio 7010 RTP/AVP 3 0 8 101
>
> b=AS:80
>
> a=rtpmap:3 GSM/8000/1
>
> a=rtpmap:0 PCMU/8000/1
>
> a=rtpmap:8 PCMA/8000/1
>
> a=rtpmap:101 telephone-event/8000
>
> a=fmtp:101 0-11
>
> m=video 7011 RTP/AVP 98 99 97 100
>
> b=AS:176
>
> a=rtpmap:98 H263-1998/90000
>
> a=fmtp:98 CIF=1;QCIF=1
>
> a=rtpmap:99 MP4V-ES/90000
>
> a=fmtp:99 profile-level-id=3
>
> a=rtpmap:97 theora/90000
>
> a=rtpmap:100 x-snow/90000
>
>
> linphone-message : cb_sndinvite (id=2)
> linphone-message : eXosip: timer sec:0 usec:100000!
> linphone-message : Received message:
> SIP/2.0 100 Trying
>
> Via: SIP/2.0/UDP 192.168.2.16:5060;rport=5060;branch=z9hG4bK208675205
>
> From: Conrad <sip:address@hidden>;tag=508960452
>
> To: Conrad Beckert <sip:address@hidden>
>
> Call-ID: 2084376213
>
> CSeq: 20 INVITE
>
> User-Agent: Linphone/3.0.0 (eXosip2/3.1.0)
>
> Content-Length: 0
>
>
>
>
> linphone-message : Message received from: 192.168.2.15:5060
> linphone-message : Message received from: 192.168.2.15:5060
> linphone-message : MESSAGE REC. CALLID:2084376213
> linphone-message : Message received from: 192.168.2.15:5060
> linphone-message : cb_rcv1xx (id=2)
> linphone-message : eXosip: timer sec:10 usec:100000!
> linphone-message : Received message:
> SIP/2.0 101 Dialog Establishement
>
> Via: SIP/2.0/UDP 192.168.2.16:5060;rport=5060;branch=z9hG4bK208675205
>
> From: Conrad <sip:address@hidden>;tag=508960452
>
> To: Conrad Beckert <sip:address@hidden>;tag=5705
>
> Call-ID: 2084376213
>
> CSeq: 20 INVITE
>
> Contact: <sip:address@hidden:5060>
>
> User-Agent: Linphone/3.0.0 (eXosip2/3.1.0)
>
> Content-Length: 0
>
>
>
>
> linphone-message : Message received from: 192.168.2.15:5060
> linphone-message : Message received from: 192.168.2.15:5060
> linphone-message : MESSAGE REC. CALLID:2084376213
> linphone-message : Message received from: 192.168.2.15:5060
> linphone-message : cb_rcv1xx (id=2)
> linphone-message : eXosip: timer sec:10 usec:100000!
> linphone-message : CALL_PROCEEDING
> linphone-message : CALL_PROCEEDING
> linphone-message : Received message:
> SIP/2.0 180 Ringing
>
> Via: SIP/2.0/UDP 192.168.2.16:5060;rport=5060;branch=z9hG4bK208675205
>
> From: Conrad <sip:address@hidden>;tag=508960452
>
> To: Conrad Beckert <sip:address@hidden>;tag=5705
>
> Call-ID: 2084376213
>
> CSeq: 20 INVITE
>
> Contact: <sip:address@hidden:5060>
>
> User-Agent: Linphone/3.0.0 (eXosip2/3.1.0)
>
> Content-Length: 0
>
>
>
>
> linphone-message : Message received from: 192.168.2.15:5060
> linphone-message : Message received from: 192.168.2.15:5060
> linphone-message : MESSAGE REC. CALLID:2084376213
> linphone-message : Message received from: 192.168.2.15:5060
> linphone-message : cb_rcv1xx (id=2)
> linphone-message : eXosip: timer sec:10 usec:100000!
> linphone-message : CALL_RINGING
> linphone-message : Remote ringing...
> linphone-message : /usr/local/share/sounds/linphone/ringback.wav opened:
> rate=8000,channel=1 linphone-message : ms_filter_link:
> MSFilePlayer:0xa0f2f48,0-->MSAlsaWrite:0xa119368,0 linphone-warning :
> alsa_set_params: periodsize:256 Using 256
> linphone-warning : alsa_set_params: period:8 Using 8
> linphone-warning : We are late of 78 miliseconds.
> linphone-message : Received message:
> SIP/2.0 200 OK
>
> Via: SIP/2.0/UDP 192.168.2.16:5060;rport=5060;branch=z9hG4bK208675205
>
> From: Conrad <sip:address@hidden>;tag=508960452
>
> To: Conrad Beckert <sip:address@hidden>;tag=5705
>
> Call-ID: 2084376213
>
> CSeq: 20 INVITE
>
> Contact: <sip:address@hidden:5060>
>
> Content-Type: application/sdp
>
> User-Agent: Linphone/3.0.0 (eXosip2/3.1.0)
>
> Content-Length:   450
>
>
>
> v=0
>
> o=2004 123456 654321 IN IP4 192.168.2.15
>
> s=A conversation
>
> c=IN IP4 192.168.2.15
>
> t=0 0
>
> m=audio 7000 RTP/AVP 3 0 8 101
>
> b=AS:80
>
> a=rtpmap:3 GSM/8000/1
>
> a=rtpmap:0 PCMU/8000/1
>
> a=rtpmap:8 PCMA/8000/1
>
> a=rtpmap:101 telephone-event/8000
>
> m=video 7001 RTP/AVP 98 99 97 100
>
> b=AS:176
>
> a=rtpmap:98 H263-1998/90000
>
> a=fmtp:98 CIF=1;QCIF=1
>
> a=rtpmap:99 MP4V-ES/90000
>
> a=fmtp:99 profile-level-id=3
>
> a=rtpmap:97 theora/90000
>
> a=rtpmap:100 x-snow/90000
>
>
> linphone-message : Message received from: 192.168.2.15:5060
> linphone-message : Message received from: 192.168.2.15:5060
> linphone-message : MESSAGE REC. CALLID:2084376213
> linphone-message : Message received from: 192.168.2.15:5060
> linphone-message : cb_rcv2xx (id=2)
> linphone-message : cb_nict_kill_transaction (id=2)
> linphone-message : eXosip: timer sec:7 usec:100000!
> linphone-message : CALL_ANSWERED
>
> linphone-message : Remote bandwidth constraint: 80
> linphone-message : Remote bandwidth constraint: 80
> linphone-message : Remote bandwidth constraint: 80
> linphone-message : Remote bandwidth constraint: 80
> linphone-message : Remote bandwidth constraint: 176
> linphone-message : Remote bandwidth constraint: 176
> linphone-message : Remote bandwidth constraint: 176
> linphone-message : Remote bandwidth constraint: 176
> linphone-message : ms_filter_unlink:
> MSFilePlayer:0xa0f2f48,0-->MSAlsaWrite:0xa119368,0 linphone-message :
> MSTicker thread exiting
> linphone-message : Setting audio encoder network bitrate to 80000
> linphone-message : ms_filter_link:
> MSAlsaRead:0xa0b19b8,0-->MSGsmEnc:0xa0d40e8,0 linphone-message :
> ms_filter_link: MSDtmfGen:0xa0d2f80,0-->MSAlsaWrite:0xa0d4060,0
> linphone-message : ms_filter_link:
> MSGsmEnc:0xa0d40e8,0-->MSRtpSend:0xa0c1108,0 linphone-message :
> ms_filter_link: MSRtpRecv:0xa119368,0-->MSGsmDec:0xa0ce818,0
> linphone-message : ms_filter_link:
> MSGsmDec:0xa0ce818,0-->MSDtmfGen:0xa0d2f80,0 linphone-message :
> alsa_open_r: opening default at 8000Hz, bits=16, stereo=0 linphone-warning
> : alsa_set_params: periodsize:256 Using 256
> linphone-warning : alsa_set_params: period:8 Using 8
> linphone-message : synchronizing timestamp, diff=800
> linphone-warning : alsa_set_params: periodsize:256 Using 256
> linphone-warning : alsa_set_params: period:8 Using 8
> linphone-message : ms_filter_unlink:
> MSV4L2Capture:0xa03faa8,0-->MSPixConv:0xa03fc78,0 linphone-message :
> ms_filter_unlink: MSPixConv:0xa03fc78,0-->MSVideoOut:0xa03fbb0,0
> linphone-message : MSTicker thread exiting
> linphone-message : Using permissive algorithm
> linphone-message : Limiting bitrate of video encoder to 176000 bits/s
> linphone-message : parsing CIF=1;QCIF=1
> linphone-message : Setting vsize=176x144, fps=10,000000
> linphone-message : v4lv2: V4L2_PIX_FMT_YUYV choosen
> linphone-message : Size of picture is 176x144
> linphone-message : ms_filter_link:
> MSV4L2Capture:0xb460c6f8,0-->MSPixConv:0xb460a018,0 linphone-message :
> ms_filter_link: MSPixConv:0xb460a018,0-->MSSizeConv:0xb4609e50,0
> linphone-message : ms_filter_link:
> MSSizeConv:0xb4609e50,0-->MSTee:0xb460a3e8,0 linphone-message :
> ms_filter_link: MSTee:0xb460a3e8,0-->MSH263Enc:0xb460a680,0
> linphone-message : ms_filter_link:
> MSH263Enc:0xb460a680,0-->MSRtpSend:0xa1016b0,0 linphone-message :
> ms_filter_link: MSRtpRecv:0xb460b978,0-->MSH263Dec:0xb460cb00,0
> linphone-message : ms_filter_link:
> MSH263Dec:0xb460cb00,0-->MSVideoOut:0xb460a478,0 linphone-message :
> ms_filter_link: MSTee:0xb460a3e8,1-->MSVideoOut:0xb460a478,1
> linphone-message : Codec bitrate set to 123199
> linphone-error : could not find encoder for codec id 5
> linphone-message : Using yuv overlay.
> linphone-message : YUV overlay using hardware acceleration.
> linphone-message : DNS resolution with 192.168.2.15:5060
> linphone-message : getaddrinfo returned the following addresses:
> linphone-message : 192.168.2.15 port 5060
> linphone-message : Message sent: (to dest=192.168.2.15:5060)
> ACK sip:address@hidden:5060 SIP/2.0
>
> Via: SIP/2.0/UDP 192.168.2.16:5060;rport;branch=z9hG4bK1109913529
>
> From: Conrad <sip:address@hidden>;tag=508960452
>
> To: Conrad Beckert <sip:address@hidden>;tag=5705
>
> Call-ID: 2084376213
>
> CSeq: 20 ACK
>
> Contact: <sip:address@hidden:5060>
>
> Max-Forwards: 70
>
> User-Agent: Linphone/3.0.0 (eXosip2/3.1.0)
>
> Content-Length: 0
>
>
>
>
> linphone-message : No authentication info in the request, ignoring
> linphone-message : bandwidth usage: audio=[d=36,7,u=31,2]
> video=[d=0,0,u=0,0] kbit/sec linphone-message : v4lv2: V4L2_PIX_FMT_YUYV
> choosen
> linphone-message : Size of picture is 176x144
> linphone-message : V4L2 video capture started.
> linphone-warning : We are late of 63 miliseconds.
> linphone-warning : We are late of 103 miliseconds.
> linphone-message : bandwidth usage: audio=[d=29,7,u=29,8]
> video=[d=20,8,u=0,0] kbit/sec linphone-message : bandwidth usage:
> audio=[d=29,4,u=29,8] video=[d=67,2,u=0,0] kbit/sec linphone-message :
> bandwidth usage: audio=[d=29,3,u=29,3] video=[d=78,5,u=0,0] kbit/sec
> linphone-message : bandwidth usage: audio=[d=29,9,u=29,3]
> video=[d=122,9,u=0,0] kbit/sec linphone-message : video_steam_process_rtcp:
> receiving RTCP SR
> linphone-message : interarrival jitter=0 , lost packets percentage since
> last report=0,000000 linphone-message : bandwidth usage:
> audio=[d=29,8,u=29,2] video=[d=59,4,u=0,0] kbit/sec linphone-message :
> bandwidth usage: audio=[d=29,6,u=29,0] video=[d=202,5,u=0,0] kbit/sec
> linphone-message : eXosip: timer sec:0 usec:100000!
> linphone-message : eXosip: timer sec:0 usec:100000!
> linphone-message : bandwidth usage: audio=[d=28,9,u=30,3]
> video=[d=35,8,u=0,0] kbit/sec linphone-message : eXosip: timer sec:0
> usec:100000!
> linphone-message : eXosip: timer sec:0 usec:100000!
> linphone-message : eXosip: timer sec:0 usec:100000!
> linphone-warning : We are late of 109 miliseconds.
> linphone-message : cb_nict_kill_transaction (id=1)
> linphone-message : Release a terminated transaction
> linphone-message : free transaction ressource 1 816241320
> linphone-message : free nist ressource
> linphone-message : eXosip: Reseting timer to 15s before waking up!
> linphone-warning : We are late of 558 miliseconds.
> linphone-warning : We are late of 392 miliseconds.
> linphone-message : bandwidth usage: audio=[d=29,9,u=29,7]
> video=[d=21,5,u=0,0] kbit/sec linphone-warning : We are late of 69
> miliseconds.
> linphone-warning : We are late of 127 miliseconds.
> linphone-warning : We are late of 151 miliseconds.
> linphone-warning : We are late of 114 miliseconds.
> linphone-message : video_steam_process_rtcp: receiving RTCP SR
> linphone-message : interarrival jitter=0 , lost packets percentage since
> last report=0,000000 linphone-message : bandwidth usage:
> audio=[d=29,9,u=29,4] video=[d=10,5,u=0,0] kbit/sec linphone-warning : We
> are late of 779 miliseconds.
> linphone-warning : We are late of 1248 miliseconds.
> linphone-message : bandwidth usage: audio=[d=29,8,u=29,4]
> video=[d=854,0,u=0,0] kbit/sec linphone-warning : We are late of 1306
> miliseconds.
> linphone-message : bandwidth usage: audio=[d=29,6,u=29,6]
> video=[d=11,4,u=0,0] kbit/sec linphone-warning : We are late of 79
> miliseconds.
> linphone-warning : We are late of 87 miliseconds.
> linphone-message : bandwidth usage: audio=[d=29,3,u=29,3]
> video=[d=14,2,u=0,0] kbit/sec linphone-message : bandwidth usage:
> audio=[d=29,4,u=30,0] video=[d=22,3,u=0,0] kbit/sec linphone-message :
> video_steam_process_rtcp: receiving RTCP SR
> linphone-message : interarrival jitter=0 , lost packets percentage since
> last report=0,000000 linphone-message : bandwidth usage:
> audio=[d=29,9,u=29,3] video=[d=0,0,u=0,0] kbit/sec linphone-message :
> bandwidth usage: audio=[d=29,5,u=29,7] video=[d=2,2,u=0,0] kbit/sec
> linphone-message : bandwidth usage: audio=[d=29,9,u=29,3]
> video=[d=0,0,u=0,0] kbit/sec linphone-message : bandwidth usage:
> audio=[d=29,8,u=29,8] video=[d=0,5,u=0,0] kbit/sec linphone-warning : Error
> sending rtp packet: Resource temporarily unavailable ; socket=19
> linphone-warning : Error sending rtp packet: Resource temporarily
> unavailable ; socket=19 linphone-warning : Error sending rtp packet:
> Resource temporarily unavailable ; socket=19 linphone-warning : Error
> sending rtp packet: Resource temporarily unavailable ; socket=19
> linphone-message : bandwidth usage: audio=[d=29,8,u=27,0]
> video=[d=0,5,u=0,0] kbit/sec linphone-warning : Error sending rtp packet:
> Resource temporarily unavailable ; socket=19 linphone-warning : Error
> sending rtp packet: Resource temporarily unavailable ; socket=19
> linphone-warning : Error sending rtp packet: Resource temporarily
> unavailable ; socket=19 linphone-warning : Error sending rtp packet:
> Resource temporarily unavailable ; socket=19 linphone-message :
> video_steam_process_rtcp: receiving RTCP SR
> linphone-message : interarrival jitter=0 , lost packets percentage since
> last report=0,000000 linphone-warning : Error sending rtp packet: Resource
> temporarily unavailable ; socket=19 linphone-warning : Error sending rtp
> packet: Resource temporarily unavailable ; socket=19 linphone-warning :
> Error sending rtp packet: Resource temporarily unavailable ; socket=19
> linphone-warning : Error sending rtp packet: Resource temporarily
> unavailable ; socket=19 ...
>
> linphone-warning : Error sending rtp packet: Resource temporarily
> unavailable ; socket=19 linphone-warning : Error sending rtp packet:
> Resource temporarily unavailable ; socket=19 linphone-warning : Error
> sending rtp packet: Resource temporarily unavailable ; socket=19
> linphone-warning : Error sending rtp packet: Resource temporarily
> unavailable ; socket=19 linphone-message : eXosip: Reseting timer to 15s
> before waking up! linphone-message : bandwidth usage: audio=[d=28,3,u=30,2]
> video=[d=0,5,u=0,0] kbit/sec linphone-message : video_steam_process_rtcp:
> receiving RTCP SR
> linphone-message : interarrival jitter=0 , lost packets percentage since
> last report=0,000000 linphone-message : synchronizing timestamp, diff=240
> linphone-message : bandwidth usage: audio=[d=29,7,u=29,1]
> video=[d=0,5,u=0,0] kbit/sec linphone-message : bandwidth usage:
> audio=[d=23,9,u=29,9] video=[d=0,5,u=0,0] kbit/sec linphone-message :
> bandwidth usage: audio=[d=56,5,u=29,5] video=[d=0,0,u=0,0] kbit/sec
> linphone-message : bandwidth usage: audio=[d=29,9,u=29,3]
> video=[d=0,5,u=0,0] kbit/sec linphone-message : video_steam_process_rtcp:
> receiving RTCP SR
> linphone-message : interarrival jitter=0 , lost packets percentage since
> last report=0,000000 linphone-message : bandwidth usage:
> audio=[d=29,8,u=29,5] video=[d=0,5,u=0,0] kbit/sec linphone-message :
> bandwidth usage: audio=[d=29,4,u=30,3] video=[d=0,5,u=0,0] kbit/sec
> linphone-message : bandwidth usage: audio=[d=29,8,u=29,2]
> video=[d=2,0,u=0,0] kbit/sec linphone-message : bandwidth usage:
> audio=[d=29,9,u=29,9] video=[d=0,6,u=0,0] kbit/sec linphone-message :
> bandwidth usage: audio=[d=29,4,u=29,8] video=[d=0,6,u=0,0] kbit/sec
> linphone-message : video_steam_process_rtcp: receiving RTCP SR
> linphone-message : interarrival jitter=0 , lost packets percentage since
> last report=0,000000 linphone-message : bandwidth usage:
> audio=[d=29,7,u=29,1] video=[d=0,6,u=0,0] kbit/sec linphone-message :
> bandwidth usage: audio=[d=29,4,u=29,8] video=[d=0,6,u=0,0] kbit/sec
> linphone-message : bandwidth usage: audio=[d=29,3,u=29,3]
> video=[d=2,1,u=0,0] kbit/sec linphone-message : bandwidth usage:
> audio=[d=29,9,u=29,3] video=[d=0,6,u=0,0] kbit/sec linphone-message :
> video_steam_process_rtcp: receiving RTCP SR
> linphone-message : interarrival jitter=0 , lost packets percentage since
> last report=0,000000 linphone-message : bandwidth usage:
> audio=[d=29,7,u=29,7] video=[d=0,6,u=0,0] kbit/sec linphone-message :
> eXosip: Reseting timer to 15s before waking up! linphone-message :
> bandwidth usage: audio=[d=29,5,u=29,5] video=[d=0,6,u=0,0] kbit/sec
> linphone-message : bandwidth usage: audio=[d=29,8,u=29,8]
> video=[d=0,6,u=0,0] kbit/sec linphone-message : bandwidth usage:
> audio=[d=29,1,u=29,0] video=[d=2,3,u=0,0] kbit/sec linphone-message :
> bandwidth usage: audio=[d=28,6,u=29,5] video=[d=0,6,u=0,0] kbit/sec
> linphone-message : video_steam_process_rtcp: receiving RTCP SR
> linphone-message : interarrival jitter=0 , lost packets percentage since
> last report=0,000000 linphone-message : bandwidth usage:
> audio=[d=29,1,u=29,1] video=[d=0,7,u=0,0] kbit/sec linphone-message :
> bandwidth usage: audio=[d=29,9,u=29,7] video=[d=0,7,u=0,0] kbit/sec
> linphone-message : bandwidth usage: audio=[d=29,7,u=29,4]
> video=[d=0,7,u=0,0] kbit/sec linphone-message : bandwidth usage:
> audio=[d=29,4,u=30,2] video=[d=2,4,u=0,0] kbit/sec linphone-message :
> video_steam_process_rtcp: receiving RTCP SR
> linphone-message : interarrival jitter=0 , lost packets percentage since
> last report=0,000000 linphone-message : bandwidth usage:
> audio=[d=29,2,u=29,8] video=[d=0,7,u=0,0] kbit/sec linphone-message :
> bandwidth usage: audio=[d=29,2,u=29,9] video=[d=0,7,u=0,0] kbit/sec
> linphone-message : bandwidth usage: audio=[d=29,3,u=29,1]
> video=[d=0,7,u=0,0] kbit/sec linphone-message : bandwidth usage:
> audio=[d=29,6,u=29,6] video=[d=0,7,u=0,0] kbit/sec linphone-message :
> bandwidth usage: audio=[d=29,4,u=29,8] video=[d=2,6,u=0,0] kbit/sec
> linphone-message : video_steam_process_rtcp: receiving RTCP SR
> linphone-message : interarrival jitter=0 , lost packets percentage since
> last report=0,000000 linphone-message : bandwidth usage:
> audio=[d=29,3,u=29,3] video=[d=74,6,u=0,0] kbit/sec linphone-message :
> bandwidth usage: audio=[d=29,8,u=29,5] video=[d=28,2,u=0,0] kbit/sec
> linphone-message : eXosip: Reseting timer to 15s before waking up!
> linphone-message : bandwidth usage: audio=[d=30,0,u=29,5]
> video=[d=4,7,u=0,0] kbit/sec linphone-message : bandwidth usage:
> audio=[d=29,9,u=29,8] video=[d=1,7,u=0,0] kbit/sec linphone-message :
> video_steam_process_rtcp: receiving RTCP SR
> linphone-message : interarrival jitter=0 , lost packets percentage since
> last report=0,000000 linphone-message : bandwidth usage:
> audio=[d=29,2,u=29,2] video=[d=1,1,u=0,0] kbit/sec linphone-message :
> bandwidth usage: audio=[d=29,7,u=29,7] video=[d=3,8,u=0,0] kbit/sec
> linphone-warning : We are late of 489 miliseconds.
> linphone-message : bandwidth usage: audio=[d=29,8,u=29,2]
> video=[d=0,6,u=0,0] kbit/sec linphone-warning : We are late of 426
> miliseconds.
> linphone-warning : We are late of 104 miliseconds.
> linphone-warning : We are late of 184 miliseconds.
> linphone-warning : We are late of 169 miliseconds.
> linphone-message : bandwidth usage: audio=[d=29,3,u=29,6]
> video=[d=1,2,u=0,0] kbit/sec linphone-message : video_steam_process_rtcp:
> receiving RTCP SR
> linphone-message : interarrival jitter=0 , lost packets percentage since
> last report=0,000000 linphone-message : bandwidth usage:
> audio=[d=29,6,u=30,2] video=[d=1,1,u=0,0] kbit/sec linphone-message :
> bandwidth usage: audio=[d=29,3,u=28,7] video=[d=1,1,u=0,0] kbit/sec
> linphone-warning : We are late of 212 miliseconds.
> linphone-warning : We are late of 148 miliseconds.
> linphone-warning : We are late of 209 miliseconds.
> linphone-warning : We are late of 90 miliseconds.
> linphone-warning : We are late of 58 miliseconds.
> linphone-message : bandwidth usage: audio=[d=29,5,u=29,5]
> video=[d=5,6,u=0,0] kbit/sec linphone-warning : We are late of 499
> miliseconds.
> linphone-warning : We are late of 450 miliseconds.
> linphone-warning : We are late of 399 miliseconds.
> linphone-warning : We are late of 246 miliseconds.
> linphone-message : bandwidth usage: audio=[d=30,3,u=29,7]
> video=[d=1,3,u=0,0] kbit/sec linphone-warning : We are late of 242
> miliseconds.
> linphone-warning : We are late of 571 miliseconds.
> linphone-message : bandwidth usage: audio=[d=29,8,u=29,4]
> video=[d=0,7,u=0,0] kbit/sec linphone-warning : We are late of 890
> miliseconds.
> linphone-message : video_steam_process_rtcp: receiving RTCP SR
> linphone-message : interarrival jitter=0 , lost packets percentage since
> last report=0,000000 linphone-warning : We are late of 938 miliseconds.
> linphone-warning : We are late of 992 miliseconds.
> linphone-warning : We are late of 927 miliseconds.
> linphone-warning : We are late of 895 miliseconds.
> linphone-warning : We are late of 854 miliseconds.
> linphone-warning : We are late of 824 miliseconds.
> linphone-message : bandwidth usage: audio=[d=29,5,u=29,3]
> video=[d=1,0,u=0,0] kbit/sec linphone-warning : We are late of 792
> miliseconds.
> linphone-warning : We are late of 622 miliseconds.
> linphone-warning : We are late of 473 miliseconds.
> linphone-message : bandwidth usage: audio=[d=29,9,u=29,6]
> video=[d=1,3,u=0,0] kbit/sec linphone-message : bandwidth usage:
> audio=[d=29,6,u=29,4] video=[d=5,0,u=0,0] kbit/sec linphone-message :
> bandwidth usage: audio=[d=29,5,u=29,5] video=[d=1,4,u=0,0] kbit/sec
> linphone-message : allocating transaction ressource 3 2084376213
> linphone-message : allocating NICT context
> linphone-message : DNS resolution with 192.168.2.15:5060
> linphone-message : getaddrinfo returned the following addresses:
> linphone-message : 192.168.2.15 port 5060
> linphone-message : Message sent: (to dest=192.168.2.15:5060)
> BYE sip:address@hidden:5060 SIP/2.0
>
> Via: SIP/2.0/UDP 192.168.2.16:5060;rport;branch=z9hG4bK181760271
>
> From: Conrad <sip:address@hidden>;tag=508960452
>
> To: Conrad Beckert <sip:address@hidden>;tag=5705
>
> Call-ID: 2084376213
>
> CSeq: 21 BYE
>
> Contact: <sip:address@hidden:5060>
>
> Max-Forwards: 70
>
> User-Agent: Linphone/3.0.0 (eXosip2/3.1.0)
>
> Content-Length: 0
>
>
>
>
> linphone-message : cb_sndbye (id=3)
> linphone-message : eXosip: timer sec:0 usec:100000!
> linphone-message : oRTP-stats:
>    Audio session's RTP statistics :
> linphone-message :  number of rtp packet sent=4084
> linphone-message :  number of rtp bytes sent=183780 bytes
> linphone-message :  number of rtp packet received=4036
> linphone-message :  number of rtp bytes received=181620 bytes
> linphone-message :  number of incoming rtp bytes successfully delivered to
> the application=181260 linphone-message :  number of times the application
> queried a packet that didn't exist=8172 linphone-message :  number of rtp
> packet lost=52
> linphone-message :  number of rtp packets received too late=5
> linphone-message :  number of bad formatted rtp packets=0
> linphone-message :  number of packet discarded because of queue overflow=0
> linphone-message : ms_filter_unlink:
> MSAlsaRead:0xa0b19b8,0-->MSGsmEnc:0xa0d40e8,0 linphone-message :
> ms_filter_unlink: MSDtmfGen:0xa0d2f80,0-->MSAlsaWrite:0xa0d4060,0
> linphone-message : ms_filter_unlink:
> MSGsmEnc:0xa0d40e8,0-->MSRtpSend:0xa0c1108,0 linphone-message :
> ms_filter_unlink: MSRtpRecv:0xa119368,0-->MSGsmDec:0xa0ce818,0
> linphone-message : ms_filter_unlink:
> MSGsmDec:0xa0ce818,0-->MSDtmfGen:0xa0d2f80,0 linphone-message : MSTicker
> thread exiting
> linphone-message : Received message:
> SIP/2.0 200 OK
>
> Via: SIP/2.0/UDP 192.168.2.16:5060;rport=5060;branch=z9hG4bK181760271
>
> From: Conrad <sip:address@hidden>;tag=508960452
>
> To: Conrad Beckert <sip:address@hidden>;tag=5705
>
> Call-ID: 2084376213
>
> CSeq: 21 BYE
>
> User-Agent: Linphone/3.0.0 (eXosip2/3.1.0)
>
> Content-Length: 0
>
>
>
>
> linphone-message : Message received from: 192.168.2.15:5060
> linphone-message : Message received from: 192.168.2.15:5060
> linphone-message : MESSAGE REC. CALLID:2084376213
> linphone-message : Message received from: 192.168.2.15:5060
> linphone-message : cb_rcv2xx (id=3)
> linphone-message : eXosip: timer sec:5 usec:10000!
> linphone-message : oRTP-stats:
>    Video session's RTP statistics :
> linphone-message :  number of rtp packet sent=0
> linphone-message :  number of rtp bytes sent=0 bytes
> linphone-message :  number of rtp packet received=105
> linphone-message :  number of rtp bytes received=21214 bytes
> linphone-message :  number of incoming rtp bytes successfully delivered to
> the application=19294 linphone-message :  number of times the application
> queried a packet that didn't exist=8153 linphone-message :  number of rtp
> packet lost=0
> linphone-message :  number of rtp packets received too late=0
> linphone-message :  number of bad formatted rtp packets=15
> linphone-message :  number of packet discarded because of queue overflow=0
> linphone-message : ms_filter_unlink:
> MSV4L2Capture:0xb460c6f8,0-->MSPixConv:0xb460a018,0 linphone-message :
> ms_filter_unlink: MSPixConv:0xb460a018,0-->MSSizeConv:0xb4609e50,0
> linphone-message : ms_filter_unlink:
> MSSizeConv:0xb4609e50,0-->MSTee:0xb460a3e8,0 linphone-message :
> ms_filter_unlink: MSTee:0xb460a3e8,0-->MSH263Enc:0xb460a680,0
> linphone-message : ms_filter_unlink:
> MSH263Enc:0xb460a680,0-->MSRtpSend:0xa1016b0,0 linphone-message :
> ms_filter_unlink: MSRtpRecv:0xb460b978,0-->MSH263Dec:0xb460cb00,0
> linphone-message : ms_filter_unlink:
> MSH263Dec:0xb460cb00,0-->MSVideoOut:0xb460a478,0 linphone-message :
> ms_filter_unlink: MSTee:0xb460a3e8,1-->MSVideoOut:0xb460a478,1
> linphone-message : MSTicker thread exiting
> linphone-message : v4lv2: V4L2_PIX_FMT_YUYV choosen
> linphone-message : Size of picture is 352x288
> linphone-message : ms_filter_link:
> MSV4L2Capture:0xa0e9420,0-->MSPixConv:0xa0a1820,0 linphone-message :
> ms_filter_link: MSPixConv:0xa0a1820,0-->MSVideoOut:0xa08de30,0
> linphone-message : Using yuv overlay.
> linphone-message : YUV overlay using hardware acceleration.
> linphone-message : Notifying all friends that we are in status 1
> linphone-message : Unhandled exosip event !
> linphone-message : v4lv2: V4L2_PIX_FMT_YUYV choosen
> linphone-message : Size of picture is 352x288
> linphone-message : V4L2 video capture started.
> linphone-message : cb_nict_kill_transaction (id=3)
> linphone-message : eXosip: eXosip_release_finished_calls remove a dialog
> (cid=1 did=-1) linphone-message : eXosip: remove a call
> linphone-message : Release a terminated transaction
> linphone-message : free transaction ressource 2 2084376213
> linphone-message : free ict ressource
> linphone-message : Release a terminated transaction
> linphone-message : free transaction ressource 3 2084376213
> linphone-message : free nict ressource
> linphone-message : eXosip: Reseting timer to 15s before waking up!
> linphone-message : eXosip: Reseting timer to 15s before waking up!
> linphone-message : CALL_RELEASED
>
> linphone-message : ms_filter_unlink:
> MSV4L2Capture:0xa0e9420,0-->MSPixConv:0xa0a1820,0 linphone-message :
> ms_filter_unlink: MSPixConv:0xa0a1820,0-->MSVideoOut:0xa08de30,0
> linphone-message : MSTicker thread exiting
>
>
>
>
> _______________________________________________
> Linphone-developers mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/linphone-developers