Re: [Linphone-developers] [Q] re-invite with new RTP address and port ?

[Simon Morlat]

Hi Clement,

You are right linphone does not support reinvite, nor in the lastest CVS.
A patch is welcome.

Simon

Le Mercredi 6 Juillet 2005 09:37, Clement Chen a écrit :
> Hi,
>     I used Linphone 1.0.1 with the asterisk IP PBX. When I configured
> linphone's extension on the PBX to allow "canreinvite", PBX will send
> a re-invite message containing the call peer's IP address and RTP port
> instead of PBX's after a call is established. However, I saw linphone
> response "200 OK" but not reset the RTP stream to use the new IP
> address and RTP port. Does the latest snapshot in the CVS repository
> support this ? If not, I would try to patch linphone to provide such
> functionality.
>     Basically, all RTP traffic in a call will go to asterisk PBX first
> and then PBX will pass it. When "canreinvite=yes" is set for both
> peers, the asterisk PBX will send re-invite messages to both peers
> after the call is established to ask them to send RTP traffic directly
> to each other without passing through the PBX.
>
> Thanks,
>
> Clement.
>
>
> _______________________________________________
> Linphone-developers mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/linphone-developers