[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: PATCH RFA: Add Go support
From: |
Ian Lance Taylor |
Subject: |
Re: PATCH RFA: Add Go support |
Date: |
Wed, 13 Oct 2010 10:31:04 -0700 |
User-agent: |
Gnus/5.13 (Gnus v5.13) Emacs/23.1 (gnu/linux) |
Ralf Wildenhues <address@hidden> writes:
> * Ian Lance Taylor wrote on Tue, Oct 12, 2010 at 11:42:56PM CEST:
>> This patch adds support for the Go programming language to libtool. Go
>> is described at http://golang.org/ .
>>
>> I'm not very familiar with libtool. This patch is mostly a
>> cut-and-paste job. It is enough to let me use automake with LIBTOOL to
>> build libraries from Go code.
>
> Do you have, or are working on, an Automake patch for Go support?
I do not have an automake patch, although that is a logical next step.
I've been using libtool with a Makefile.am which uses this definition:
LTGOCOMPILE = $(LIBTOOL) --tag GO --mode=compile $(GCCGO) $(INCLUDES) \
$(AM_GOFLAGS) $(GOFLAGS)
and then runs $(LTGOCOMPILE) as needed. Adding Go support to automake
may be a little tricky as Go requires a slightly different compilation
model: you must pass all files that are in the same package to the
compiler at once. You can't compile them separately.
>> The patch requires a patch which I've proposed for autoconf:
>>
>> http://lists.gnu.org/archive/html/autoconf-patches/2010-10/msg00004.html
>>
>> I'm not sure how to handle a libtool patch which requires an autoconf
>> patch. Perhaps this can not be committed until the next libtool
>> release.
>
> We usually try to support older Autoconf as well (currently back to
> 2.59), so that people don't need to upgrade all at once. When only
> macros from Autoconf proper are missing (as opposed to macros from other
> third parties), they can be treated similarly to how AC_PROG_SED is
> treated with a backup in libtool.m4.
Done.
>> In any case I would appreciate any comments and any advice as to how to
>> get this committed to libtool. Thanks.
>
> tests/suffix.test should be updated.
Dont.
> Can you send output of
> ./libtool --tag=GO --config
>
> for Libtool with Go support enabled? You need to patch Libtool's
> configure.ac to enable Go support (this should be part of the patch as
> well).
Attached.
> A NEWS entry would be good.
Done.
> Testsuite additions (to the new testsuite)
> would be nice, like one setup where Go is the only language enabled (to
> verify that object and executable extension computation work etc).
> We can write those tests if you're not familiar with Autotest.
Can you suggest a test that I can look at to see what this should look
like?
Updated patch attached (two patches from git format-patch, let me know
if there is a better way to send this).
Ian
# Which release of libtool.m4 was used?
macro_version=2.4.1a
macro_revision=1.3300
# Assembler program.
AS="as"
# DLL creation program.
DLLTOOL="false"
# Object dumper program.
OBJDUMP="objdump"
# Whether or not to build shared libraries.
build_libtool_libs=yes
# Whether or not to build static libraries.
build_old_libs=yes
# What type of objects to build.
pic_mode=default
# Whether or not to optimize for fast installation.
fast_install=yes
# Shell to use when invoking shell scripts.
SHELL="/bin/sh"
# An echo program that protects backslashes.
ECHO="printf %s\\n"
# The host system.
host_alias=
host=x86_64-unknown-linux-gnu
host_os=linux-gnu
# The build system.
build_alias=
build=x86_64-unknown-linux-gnu
build_os=linux-gnu
# A sed program that does not truncate output.
SED="/bin/sed"
# Sed that helps us avoid accidentally triggering echo(1) options like -n.
Xsed="$SED -e 1s/^X//"
# A grep program that handles long lines.
GREP="/bin/grep"
# An ERE matcher.
EGREP="/bin/grep -E"
# A literal string matcher.
FGREP="/bin/grep -F"
# A BSD- or MS-compatible name lister.
NM="/usr/bin/nm -B"
# Whether we need soft or hard links.
LN_S="ln -s"
# What is the maximum length of a command?
max_cmd_len=1572864
# Object file suffix (normally "o").
objext=o
# Executable file suffix (normally "").
exeext=
# whether the shell understands "unset".
lt_unset=unset
# turn spaces into newlines.
SP2NL="tr \\040 \\012"
# turn newlines into spaces.
NL2SP="tr \\015\\012 \\040\\040"
# convert $build file names to $host format.
to_host_file_cmd=func_convert_file_noop
# convert $build files to toolchain format.
to_tool_file_cmd=func_convert_file_noop
# Method to check whether dependent libraries are shared objects.
deplibs_check_method="pass_all"
# Command to use when deplibs_check_method = "file_magic".
file_magic_cmd="\$MAGIC_CMD"
# How to find potential files when deplibs_check_method = "file_magic".
file_magic_glob=""
# Find potential files using nocaseglob when deplibs_check_method =
"file_magic".
want_nocaseglob="no"
# Command to associate shared and link libraries.
sharedlib_from_linklib_cmd="printf %s\\n"
# The archiver.
AR="ar"
# Flags to create an archive.
AR_FLAGS="cru"
# How to feed a file listing to the archiver.
archiver_list_spec="@"
# A symbol stripping program.
STRIP="strip"
# Commands used to install an old-style archive.
RANLIB="ranlib"
old_postinstall_cmds="chmod 644 \$oldlib~\$RANLIB \$oldlib"
old_postuninstall_cmds=""
# Whether to use a lock for old archive extraction.
lock_old_archive_extraction=no
# A C compiler.
LTCC="gcc"
# LTCC compiler flags.
LTCFLAGS="-g -O2"
# Take the output of nm and produce a listing of raw symbols and C names.
global_symbol_pipe="sed -n -e 's/^.*[ ]\\([ABCDGIRSTW][ABCDGIRSTW]*\\)[
][ ]*\\([_A-Za-z][_A-Za-z0-9]*\\)\$/\\1 \\2 \\2/p' | sed '/ __gnu_lto/d'"
# Transform the output of nm in a proper C declaration.
global_symbol_to_cdecl="sed -n -e 's/^T .* \\(.*\\)\$/extern int \\1();/p' -e
's/^[ABCDGIRSTW]* .* \\(.*\\)\$/extern char \\1;/p'"
# Transform the output of nm in a C name address pair.
global_symbol_to_c_name_address="sed -n -e 's/^: \\([^ ]*\\)[ ]*\$/
{\\\"\\1\\\", (void *) 0},/p' -e 's/^[ABCDGIRSTW]* \\([^ ]*\\) \\([^ ]*\\)\$/
{\"\\2\", (void *) \\&\\2},/p'"
# Transform the output of nm in a C name address pair when lib prefix is needed.
global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \\([^ ]*\\)[ ]*\$/
{\\\"\\1\\\", (void *) 0},/p' -e 's/^[ABCDGIRSTW]* \\([^ ]*\\) \\(lib[^
]*\\)\$/ {\"\\2\", (void *) \\&\\2},/p' -e 's/^[ABCDGIRSTW]* \\([^ ]*\\) \\([^
]*\\)\$/ {\"lib\\2\", (void *) \\&\\2},/p'"
# Specify filename containing input files for $NM.
nm_file_list_spec="@"
# The root where to search for dependent libraries,and in which our libraries
should be installed.
lt_sysroot=
# The name of the directory that contains temporary libtool files.
objdir=.libs
# Used to examine libraries when file_magic_cmd begins with "file".
MAGIC_CMD=file
# Must we lock files when doing compilation?
need_locks="no"
# Manifest tool.
MANIFEST_TOOL=":"
# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
DSYMUTIL=""
# Tool to change global to local symbols on Mac OS X.
NMEDIT=""
# Tool to manipulate fat objects and archives on Mac OS X.
LIPO=""
# ldd/readelf like tool for Mach-O binaries on Mac OS X.
OTOOL=""
# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
OTOOL64=""
# Old archive suffix (normally "a").
libext=a
# Shared library suffix (normally ".so").
shrext_cmds=".so"
# The commands to extract the exported symbol list from a shared archive.
extract_expsyms_cmds=""
# Variables whose values should be saved in libtool wrapper scripts and
# restored at link time.
variables_saved_for_relink="PATH LD_LIBRARY_PATH LD_RUN_PATH GCC_EXEC_PREFIX
COMPILER_PATH LIBRARY_PATH"
# Do we need the "lib" prefix for modules?
need_lib_prefix=no
# Do we need a version for libraries?
need_version=no
# Library versioning type.
version_type=linux
# Shared library runtime path variable.
runpath_var=LD_RUN_PATH
# Shared library path variable.
shlibpath_var=LD_LIBRARY_PATH
# Is shlibpath searched before the hard-coded library search path?
shlibpath_overrides_runpath=no
# Format of library name prefix.
libname_spec="lib\$name"
# List of archive names. First name is the real one, the rest are links.
# The last name is the one that the linker finds with -lNAME
library_names_spec="\${libname}\${release}\${shared_ext}\$versuffix
\${libname}\${release}\${shared_ext}\$major \$libname\${shared_ext}"
# The coded name of the library, if different from the real name.
soname_spec="\${libname}\${release}\${shared_ext}\$major"
# Permission mode override for installation of shared libraries.
install_override_mode=""
# Command to use after installation of a shared archive.
postinstall_cmds=""
# Command to use after uninstallation of a shared archive.
postuninstall_cmds=""
# Commands used to finish a libtool library installation in a directory.
finish_cmds="PATH=\\\"\\\$PATH:/sbin\\\" ldconfig -n \$libdir"
# As "finish_cmds", except a single script fragment to be evaled but
# not shown.
finish_eval=""
# Whether we should hardcode library paths into libraries.
hardcode_into_libs=yes
# Compile-time system search path for libraries.
sys_lib_search_path_spec="/home/iant/gcc/gccgo-install/lib/gcc/x86_64-unknown-linux-gnu/4.6.0
/home/iant/gcc/gccgo-install/lib64 /lib64 /usr/lib64 "
# Run-time system search path for libraries.
sys_lib_dlsearch_path_spec="/lib /usr/lib /usr/lib/nvidia-current
/usr/lib32/nvidia-current /usr/lib32/alsa-lib /usr/lib/alsa-lib /usr/local/lib
/usr/lib/opencryptoki /usr/lib/opencryptoki/stdll /lib/x86_64-linux-gnu
/usr/lib/x86_64-linux-gnu "
# Whether dlopen is supported.
dlopen_support=yes
# Whether dlopen of programs is supported.
dlopen_self=yes
# Whether dlopen of statically linked programs is supported.
dlopen_self_static=no
# Commands to strip libraries.
old_striplib="strip --strip-debug"
striplib="strip --strip-unneeded"
# The linker used to build libraries.
LD="/home/iant/binutils/gold-dir/ld -m elf_x86_64"
# How to create reloadable object files.
reload_flag=" -r"
reload_cmds="\$LD\$reload_flag -o \$output\$reload_objs"
# Commands used to build an old-style archive.
old_archive_cmds="\$AR \$AR_FLAGS \$oldlib\$oldobjs~\$RANLIB \$oldlib"
# A language specific compiler.
CC="gcc"
# Is the compiler the GNU compiler?
with_gcc=yes
# Compiler flag to turn off builtin functions.
no_builtin_flag=" -fno-builtin"
# Additional compiler flags for building library objects.
pic_flag=" -fPIC -DPIC"
# How to pass a linker flag through the compiler.
wl="-Wl,"
# Compiler flag to prevent dynamic linking.
link_static_flag="-static"
# Does compiler simultaneously support -c and -o options?
compiler_c_o="yes"
# Whether or not to add -lc for building shared libraries.
build_libtool_need_lc=no
# Whether or not to disallow shared libs when runtime libs are static.
allow_libtool_libs_with_static_runtimes=no
# Compiler flag to allow reflexive dlopens.
export_dynamic_flag_spec="\${wl}--export-dynamic"
# Compiler flag to generate shared objects directly from archives.
whole_archive_flag_spec="\${wl}--whole-archive\$convenience
\${wl}--no-whole-archive"
# Whether the compiler copes with passing no objects directly.
compiler_needs_object="no"
# Create an old-style archive from a shared archive.
old_archive_from_new_cmds=""
# Create a temporary old-style archive to link instead of a shared archive.
old_archive_from_expsyms_cmds=""
# Commands used to build a shared archive.
archive_cmds="\$CC -shared \$pic_flag \$libobjs \$deplibs \$compiler_flags
\${wl}-soname \$wl\$soname -o \$lib"
archive_expsym_cmds="echo \\\"{ global:\\\" > \$output_objdir/\$libname.ver~
cat \$export_symbols | sed -e \\\"s/\\\\(.*\\\\)/\\\\1;/\\\" >>
\$output_objdir/\$libname.ver~
echo \\\"local: *; };\\\" >> \$output_objdir/\$libname.ver~
\$CC -shared \$pic_flag \$libobjs \$deplibs \$compiler_flags
\${wl}-soname \$wl\$soname \${wl}-version-script
\${wl}\$output_objdir/\$libname.ver -o \$lib"
# Commands used to build a loadable module if different from building
# a shared archive.
module_cmds=""
module_expsym_cmds=""
# Whether we are building with GNU ld or not.
with_gnu_ld="yes"
# Flag that allows shared libraries with undefined symbols to be built.
allow_undefined_flag=""
# Flag that enforces no undefined symbols.
no_undefined_flag=""
# Flag to hardcode $libdir into a binary during linking.
# This must work even if $libdir does not exist
hardcode_libdir_flag_spec="\${wl}-rpath \${wl}\$libdir"
# If ld is used when linking, flag to hardcode $libdir into a binary
# during linking. This must work even if $libdir does not exist.
hardcode_libdir_flag_spec_ld=""
# Whether we need a single "-rpath" flag with a separated argument.
hardcode_libdir_separator=""
# Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
# DIR into the resulting binary.
hardcode_direct=no
# Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
# DIR into the resulting binary and the resulting library dependency is
# "absolute",i.e impossible to change by setting ${shlibpath_var} if the
# library is relocated.
hardcode_direct_absolute=no
# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
# into the resulting binary.
hardcode_minus_L=no
# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
# into the resulting binary.
hardcode_shlibpath_var=unsupported
# Set to "yes" if building a shared library automatically hardcodes DIR
# into the library and all subsequent libraries and executables linked
# against it.
hardcode_automatic=no
# Set to yes if linker adds runtime paths of dependent libraries
# to runtime path list.
inherit_rpath=no
# Whether libtool must link a program against all its dependency libraries.
link_all_deplibs=unknown
# Set to "yes" if exported symbols are required.
always_export_symbols=no
# The commands to list exported symbols.
export_symbols_cmds="\$NM \$libobjs \$convenience | \$global_symbol_pipe |
\$SED 's/.* //' | sort | uniq > \$export_symbols"
# Symbols that should not be listed in the preloaded symbols.
exclude_expsyms="_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*"
# Symbols that must always be exported.
include_expsyms=""
# Commands necessary for linking programs (against libraries) with templates.
prelink_cmds=""
# Commands necessary for finishing linking programs.
postlink_cmds=""
# Specify filename containing input files.
file_list_spec=""
# How to hardcode a shared library path into an executable.
hardcode_action=immediate
# The directories searched by this compiler when creating a shared library.
compiler_lib_search_dirs=""
# Dependencies to place before and after the objects being linked to
# create a shared library.
predep_objects=""
postdep_objects=""
predeps=""
postdeps=""
# The library search path used internally by the compiler when linking
# a shared library.
compiler_lib_search_path=""
# ### BEGIN LIBTOOL TAG CONFIG: GO
# The linker used to build libraries.
LD="/home/iant/binutils/gold-dir/ld -m elf_x86_64"
# How to create reloadable object files.
reload_flag=" -r"
reload_cmds="\$LD\$reload_flag -o \$output\$reload_objs"
# Commands used to build an old-style archive.
old_archive_cmds="\$AR \$AR_FLAGS \$oldlib\$oldobjs~\$RANLIB \$oldlib"
# A language specific compiler.
CC="gccgo"
# Is the compiler the GNU compiler?
with_gcc=
# Compiler flag to turn off builtin functions.
no_builtin_flag=" -fno-builtin"
# Additional compiler flags for building library objects.
pic_flag=" -fPIC"
# How to pass a linker flag through the compiler.
wl="-Wl,"
# Compiler flag to prevent dynamic linking.
link_static_flag="-static"
# Does compiler simultaneously support -c and -o options?
compiler_c_o="yes"
# Whether or not to add -lc for building shared libraries.
build_libtool_need_lc=no
# Whether or not to disallow shared libs when runtime libs are static.
allow_libtool_libs_with_static_runtimes=no
# Compiler flag to allow reflexive dlopens.
export_dynamic_flag_spec="\${wl}--export-dynamic"
# Compiler flag to generate shared objects directly from archives.
whole_archive_flag_spec="\${wl}--whole-archive\$convenience
\${wl}--no-whole-archive"
# Whether the compiler copes with passing no objects directly.
compiler_needs_object="no"
# Create an old-style archive from a shared archive.
old_archive_from_new_cmds=""
# Create a temporary old-style archive to link instead of a shared archive.
old_archive_from_expsyms_cmds=""
# Commands used to build a shared archive.
archive_cmds="\$CC -shared \$pic_flag \$libobjs \$deplibs \$compiler_flags
\${wl}-soname \$wl\$soname -o \$lib"
archive_expsym_cmds="echo \\\"{ global:\\\" > \$output_objdir/\$libname.ver~
cat \$export_symbols | sed -e \\\"s/\\\\(.*\\\\)/\\\\1;/\\\" >>
\$output_objdir/\$libname.ver~
echo \\\"local: *; };\\\" >> \$output_objdir/\$libname.ver~
\$CC -shared \$pic_flag \$libobjs \$deplibs \$compiler_flags
\${wl}-soname \$wl\$soname \${wl}-version-script
\${wl}\$output_objdir/\$libname.ver -o \$lib"
# Commands used to build a loadable module if different from building
# a shared archive.
module_cmds=""
module_expsym_cmds=""
# Whether we are building with GNU ld or not.
with_gnu_ld="yes"
# Flag that allows shared libraries with undefined symbols to be built.
allow_undefined_flag=""
# Flag that enforces no undefined symbols.
no_undefined_flag=""
# Flag to hardcode $libdir into a binary during linking.
# This must work even if $libdir does not exist
hardcode_libdir_flag_spec="\${wl}-rpath \${wl}\$libdir"
# If ld is used when linking, flag to hardcode $libdir into a binary
# during linking. This must work even if $libdir does not exist.
hardcode_libdir_flag_spec_ld=""
# Whether we need a single "-rpath" flag with a separated argument.
hardcode_libdir_separator=""
# Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
# DIR into the resulting binary.
hardcode_direct=no
# Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
# DIR into the resulting binary and the resulting library dependency is
# "absolute",i.e impossible to change by setting ${shlibpath_var} if the
# library is relocated.
hardcode_direct_absolute=no
# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
# into the resulting binary.
hardcode_minus_L=no
# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
# into the resulting binary.
hardcode_shlibpath_var=unsupported
# Set to "yes" if building a shared library automatically hardcodes DIR
# into the library and all subsequent libraries and executables linked
# against it.
hardcode_automatic=no
# Set to yes if linker adds runtime paths of dependent libraries
# to runtime path list.
inherit_rpath=no
# Whether libtool must link a program against all its dependency libraries.
link_all_deplibs=unknown
# Set to "yes" if exported symbols are required.
always_export_symbols=no
# The commands to list exported symbols.
export_symbols_cmds="\$NM \$libobjs \$convenience | \$global_symbol_pipe |
\$SED 's/.* //' | sort | uniq > \$export_symbols"
# Symbols that should not be listed in the preloaded symbols.
exclude_expsyms="_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*"
# Symbols that must always be exported.
include_expsyms=""
# Commands necessary for linking programs (against libraries) with templates.
prelink_cmds=""
# Commands necessary for finishing linking programs.
postlink_cmds=""
# Specify filename containing input files.
file_list_spec=""
# How to hardcode a shared library path into an executable.
hardcode_action=immediate
# The directories searched by this compiler when creating a shared library.
compiler_lib_search_dirs=""
# Dependencies to place before and after the objects being linked to
# create a shared library.
predep_objects=""
postdep_objects=""
predeps=""
postdeps=""
# The library search path used internally by the compiler when linking
# a shared library.
compiler_lib_search_path=""
# ### END LIBTOOL TAG CONFIG: GO
>From b4af7daf876a49174e87a76345f4c8f96521702c Mon Sep 17 00:00:00 2001
From: Ian Lance Taylor <address@hidden>
Date: Tue, 12 Oct 2010 14:38:49 -0700
Subject: [PATCH 1/2] Add Go support.
---
ChangeLog | 11 ++++++
doc/libtool.texi | 3 +-
libltdl/config/ltmain.m4sh | 2 +-
libltdl/m4/libtool.m4 | 84 ++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 98 insertions(+), 2 deletions(-)
diff --git a/ChangeLog b/ChangeLog
index 9caba84..732b2d3 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,14 @@
+2010-10-12 Ian Lance Taylor <address@hidden>
+
+ * libltdl/m4/libtool.m4 (LT_LANG): Add Go.
+ (AC_PROG_GO): Provide.
+ (_LT_SYS_HIDDEN_LIBDEPS): Add Go case.
+ (_LT_LANG_GO_CONFIG): Define.
+ (LT_PROG_GO): Define.
+ * libltdl/config/ltmain.m4sh: Match *.go.
+ * doc/libtool.texi (LT_INIT): Mention Go.
+ (Tags): Mention Go.
+
2010-10-07 Roumen Petrov <address@hidden>
Add test case for 69e77671 (cwrapper PATH manipulation order)
diff --git a/doc/libtool.texi b/doc/libtool.texi
index cd5a181..302e6ed 100644
--- a/doc/libtool.texi
+++ b/doc/libtool.texi
@@ -2169,7 +2169,7 @@ specifying @option{--with-pic} to @command{configure}.
@defmac LT_LANG (@var{language})
Enable @command{libtool} support for the language given if it
has not yet already been enabled. Languages accepted are ``C++'',
-``Fortran 77'', ``Java'' and ``Windows Resource''.
+``Fortran 77'', ``Java'', ``Go'', and ``Windows Resource''.
If Autoconf language support macros such as @code{AC_PROG_CXX} are
used in your @file{configure.ac}, Libtool language support will automatically
@@ -2768,6 +2768,7 @@ correspondence between language names and tags names.
@item Java @tab GCJ
@item Fortran 77 @tab F77
@item Fortran @tab FC
address@hidden Go @tab GO
@item Windows Resource @tab RC
@end multitable
diff --git a/libltdl/config/ltmain.m4sh b/libltdl/config/ltmain.m4sh
index 1078e75..ee09925 100644
--- a/libltdl/config/ltmain.m4sh
+++ b/libltdl/config/ltmain.m4sh
@@ -1270,7 +1270,7 @@ func_mode_compile ()
*.[cCFSifmso] | \
*.ada | *.adb | *.ads | *.asm | \
*.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
- *.[fF][09]? | *.for | *.java | *.obj | *.sx | *.cu | *.cup)
+ *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup)
func_xform "$libobj"
libobj=$func_xform_result
;;
diff --git a/libltdl/m4/libtool.m4 b/libltdl/m4/libtool.m4
index 967dd38..fac9cc6 100644
--- a/libltdl/m4/libtool.m4
+++ b/libltdl/m4/libtool.m4
@@ -801,6 +801,7 @@ AC_DEFUN([LT_LANG],
m4_case([$1],
[C], [_LT_LANG(C)],
[C++], [_LT_LANG(CXX)],
+ [Go], [_LT_LANG(GO)],
[Java], [_LT_LANG(GCJ)],
[Fortran 77], [_LT_LANG(F77)],
[Fortran], [_LT_LANG(FC)],
@@ -852,6 +853,10 @@ AC_PROVIDE_IFELSE([AC_PROG_GCJ],
m4_ifdef([LT_PROG_GCJ],
[m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
+AC_PROVIDE_IFELSE([AC_PROG_GO],
+ [LT_LANG(GO)],
+ [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])])
+
AC_PROVIDE_IFELSE([LT_PROG_RC],
[LT_LANG(RC)],
[m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
@@ -6902,6 +6907,11 @@ public class foo {
}
};
_LT_EOF
+], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF
+package foo
+func foo() {
+}
+_LT_EOF
])
_lt_libdeps_save_CFLAGS=$CFLAGS
@@ -7423,6 +7433,75 @@ CC=$lt_save_CC
CFLAGS=$lt_save_CFLAGS
])# _LT_LANG_GCJ_CONFIG
+# _LT_LANG_GO_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for the GNU Go compiler
+# are suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_GO_CONFIG],
+[AC_REQUIRE([LT_PROG_GO])dnl
+AC_LANG_SAVE
+
+# Source file extension for Go test sources.
+ac_ext=go
+
+# Object file extension for compiled Go test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="package main; func main() { }"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='package main; func main() { }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=yes
+CC=${GCCGO-"gccgo"}
+CFLAGS=$GOFLAGS
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_TAGVAR(LD, $1)="$LD"
+_LT_CC_BASENAME([$compiler])
+
+# Go did not exist at the time GCC didn't implicitly link libc in.
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+ _LT_COMPILER_NO_RTTI($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+fi
+
+AC_LANG_RESTORE
+
+GCC=$lt_save_GCC
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+])# _LT_LANG_GO_CONFIG
# _LT_LANG_RC_CONFIG([TAG])
# -------------------------
@@ -7492,6 +7571,11 @@ AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
+# LT_PROG_GO
+# ----------
+AC_DEFUN([LT_PROG_GO],
+[AC_CHECK_TOOL(GCCGO, gccgo,)
+])
# LT_PROG_RC
# ----------
--
1.7.1
>From 1a57c1ff77b726ec1604bfa115ff4bdd48588bd6 Mon Sep 17 00:00:00 2001
From: Ian Lance Taylor <address@hidden>
Date: Wed, 13 Oct 2010 10:17:22 -0700
Subject: [PATCH 2/2] Update Go support based on comments from Ralf Wildenhues.
---
NEWS | 4 ++++
configure.ac | 1 +
libltdl/m4/libtool.m4 | 23 +++++++++++++++++++++++
tests/suffix.test | 2 +-
4 files changed, 29 insertions(+), 1 deletions(-)
diff --git a/NEWS b/NEWS
index 90e33f7..26139bb 100644
--- a/NEWS
+++ b/NEWS
@@ -2,6 +2,10 @@ NEWS - list of user-visible changes between releases of GNU
Libtool
New in 2.4.2 2010-12-??: git version 2.4.1a, Libtool team:
+* New features:
+
+ - Initial support for Go, using the gccgo compiler.
+
* Bug fixes:
- The generic approximation of the command line length limit (when getconf is
diff --git a/configure.ac b/configure.ac
index 63ee8bf..0bad772 100644
--- a/configure.ac
+++ b/configure.ac
@@ -196,6 +196,7 @@ _LTDL_SETUP
LT_LANG(C++)
LT_LANG(Fortran 77)
LT_LANG(Fortran)
+LT_LANG(Go)
LT_LANG(Java)
LT_LANG(Windows Resource)
diff --git a/libltdl/m4/libtool.m4 b/libltdl/m4/libtool.m4
index fac9cc6..d572d5a 100644
--- a/libltdl/m4/libtool.m4
+++ b/libltdl/m4/libtool.m4
@@ -822,6 +822,29 @@ m4_defun([_LT_LANG],
_LT_LANG_$1_CONFIG($1)])dnl
])# _LT_LANG
+m4_ifndef([AC_PROG_GO], [
+############################################################
+# NOTE: This macro has been submitted for inclusion into #
+# GNU Autoconf as AC_PROG_GO. When it is available in #
+# a released version of Autoconf we should remove this #
+# macro and use it instead. #
+############################################################
+m4_defun([AC_PROG_GO],
+[AC_LANG_PUSH(Go)dnl
+AC_ARG_VAR([GCCGO], [Go compiler command])dnl
+AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl
+_AC_ARG_VAR_LDFLAGS()dnl
+AC_CHECK_TOOL(GCCGO, gccgo)
+if test -z "$GCCGO"; then
+ if test -n "$ac_tool_prefix"; then
+ AC_CHECK_PROG(GCCGO, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo])
+ fi
+fi
+if test -z "$GCCGO"; then
+ AC_CHECK_PROG(GCCGO, gccgo, gccgo, false)
+fi
+])#m4_defun
+])#m4_ifndef
# _LT_LANG_DEFAULT_CONFIG
# -----------------------
diff --git a/tests/suffix.test b/tests/suffix.test
index a035897..b5c2a88 100755
--- a/tests/suffix.test
+++ b/tests/suffix.test
@@ -25,7 +25,7 @@
# Extensions taken from the ones that Automake recognizes, plus Objective C,
# and GNU Ada. Also test that multiple dots are handled correctly.
-extensions="C F S ada adb ads asm c c++ cc cpp cxx f f90 F90 f95 F95 f03 F03
for m s sx ada.ada"
+extensions="C F S ada adb ads asm c c++ cc cpp cxx f f90 F90 f95 F95 f03 F03
for go m s sx ada.ada"
bad_names="foo."
. tests/defs || exit 1
--
1.7.1