[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
libtool ChangeLog libtoolize.m4sh tests/libtool...
From: |
Ralf Wildenhues |
Subject: |
libtool ChangeLog libtoolize.m4sh tests/libtool... |
Date: |
Mon, 12 Jun 2006 17:54:15 +0000 |
CVSROOT: /cvsroot/libtool
Module name: libtool
Changes by: Ralf Wildenhues <rwild> 06/06/12 17:54:15
Modified files:
. : ChangeLog libtoolize.m4sh
tests : libtoolize.at testsuite.at
Log message:
Fix several libtoolize-related bugs:
- Do not symlink aclocal.m4, to work around a bug in aclocal
overwriting the linked-to file instead of removing the symlink.
- Have `libtoolize --copy' cause current time stamps, so that
dependents will be rebuilt; for this, install files in order.
- Fix list of distribution files for (non)recursive libltdl.
- Fix some failure cases.
* libtoolize.m4sh (func_copy_cb):
If `$opt_link', still copy `aclocal.m4', so a subsequent
`aclocal' will not overwrite the symlink target.
In `--copy' mode, do `cp -p' and `touch' for each file, so
timestamps are updated but permissions preserved.
(main): Reorder installing of files to match logical order
and timestamp requirements.
(func_fixup_Makefile_inc): Renamed to
(func_fixup_Makefile): this. Add sed scriptlet to remove
non-existent files from EXTRA_DIST, for either nonrecursive
or recursive mode.
(main): call it to mangle also in recursive mode.
* tests/libtoolize.at (expout): Adjusted.
* tests/testsuite.at (tst_dist): Default to `dist'.
CVSWeb URLs:
http://cvs.savannah.gnu.org/viewcvs/libtool/ChangeLog?cvsroot=libtool&r1=1.2308&r2=1.2309
http://cvs.savannah.gnu.org/viewcvs/libtool/libtoolize.m4sh?cvsroot=libtool&r1=1.54&r2=1.55
http://cvs.savannah.gnu.org/viewcvs/libtool/tests/libtoolize.at?cvsroot=libtool&r1=1.8&r2=1.9
http://cvs.savannah.gnu.org/viewcvs/libtool/tests/testsuite.at?cvsroot=libtool&r1=1.41&r2=1.42
Patches:
Index: ChangeLog
===================================================================
RCS file: /cvsroot/libtool/libtool/ChangeLog,v
retrieving revision 1.2308
retrieving revision 1.2309
diff -u -b -r1.2308 -r1.2309
--- ChangeLog 10 Jun 2006 07:36:25 -0000 1.2308
+++ ChangeLog 12 Jun 2006 17:54:15 -0000 1.2309
@@ -1,3 +1,28 @@
+2006-06-12 Ralf Wildenhues <address@hidden>
+
+ Fix several libtoolize-related bugs:
+ - Do not symlink aclocal.m4, to work around a bug in aclocal
+ overwriting the linked-to file instead of removing the symlink.
+ - Have `libtoolize --copy' cause current time stamps, so that
+ dependents will be rebuilt; for this, install files in order.
+ - Fix list of distribution files for (non)recursive libltdl.
+ - Fix some failure cases.
+
+ * libtoolize.m4sh (func_copy_cb):
+ If `$opt_link', still copy `aclocal.m4', so a subsequent
+ `aclocal' will not overwrite the symlink target.
+ In `--copy' mode, do `cp -p' and `touch' for each file, so
+ timestamps are updated but permissions preserved.
+ (main): Reorder installing of files to match logical order
+ and timestamp requirements.
+ (func_fixup_Makefile_inc): Renamed to
+ (func_fixup_Makefile): this. Add sed scriptlet to remove
+ non-existent files from EXTRA_DIST, for either nonrecursive
+ or recursive mode.
+ (main): call it to mangle also in recursive mode.
+ * tests/libtoolize.at (expout): Adjusted.
+ * tests/testsuite.at (tst_dist): Default to `dist'.
+
2006-06-10 Ralf Wildenhues <address@hidden>
Fix libltdl to always have all generated files up to date.
@@ -441,6 +466,6 @@
Continued in ChangeLog.2005
- $Revision: 1.2308 $ $Date: 2006/06/10 07:36:25 $
+ $Revision: 1.2309 $ $Date: 2006/06/12 17:54:15 $
vim:tw=72
Index: libtoolize.m4sh
===================================================================
RCS file: /cvsroot/libtool/libtool/libtoolize.m4sh,v
retrieving revision 1.54
retrieving revision 1.55
diff -u -b -r1.54 -r1.55
--- libtoolize.m4sh 18 May 2006 05:43:00 -0000 1.54
+++ libtoolize.m4sh 12 Jun 2006 17:54:15 -0000 1.55
@@ -262,17 +262,29 @@
func_mkdir_p `$ECHO "X$my_destdir/$my_file" | $Xsed -e "$dirname"`
$RM "$my_destdir/$my_file"
- if $opt_link && $LN_S "$my_srcdir/$my_file" "$my_destdir/$my_file"; then
- $opt_quiet || func_echo "linking $my_copy_msg"
- copy_return_status=0
- elif { ( cd "$my_srcdir" 2>/dev/null && $TAR chf - "$my_file" 2>/dev/null;
) \
- | ( umask 0 && cd "$my_destdir" 2>/dev/null && "$TAR" xf - >/dev/null
2>&1; ); } ; then
+ if $opt_link; then
+ if test "$my_file" = "aclocal.m4"; then
+ if { ( cd "$my_srcdir" && $TAR chf - "$my_file" ) 2>/dev/null \
+ | ( umask 0 && cd "$my_destdir" && $TAR xf - ) >/dev/null 2>&1 ; }
+ then
$opt_quiet || func_echo "copying $my_copy_msg"
copy_return_status=0
- elif $CP -p "$my_srcdir/$my_file" "$my_destdir/$my_file"; then
- $opt_quiet || func_echo "copying $my_copy_msg"
+ fi
+ else
+ if $LN_S "$my_srcdir/$my_file" "$my_destdir/$my_file"; then
+ $opt_quiet || func_echo "linking $my_copy_msg"
copy_return_status=0
+ fi
+ fi
else
+ if { ( cd "$my_srcdir" && $TAR chf - "$my_file" ) 2>/dev/null \
+ | ( umask 0 && cd "$my_destdir" && $TAR xf - ) >/dev/null 2>&1; } \
+ && touch "$my_destdir/$my_file"; then
+ $opt_quiet || func_echo "copying $my_copy_msg"
+ copy_return_status=0
+ fi
+ fi
+ if test "$copy_return_status" != 0; then
func_error "can not copy \`$my_srcdir/$my_file' to \`$my_destdir/'"
exit_status=$EXIT_FAILURE
fi
@@ -312,28 +324,45 @@
IFS="$my_save_IFS"
}
-# func_fixup_Makefile_inc srcfile srcdir destdir
-func_fixup_Makefile_inc ()
+# func_fixup_Makefile srcfile srcdir destdir
+func_fixup_Makefile ()
{
my_filename="$1"
my_srcdir="$2"
my_destdir="$3"
-
+ my_fixup_non_subpackage_script="\
+ s,libltdl/configure.ac,,
+ s,libltdl/configure,,
+ s,libltdl/aclocal.m4,,
+ s,libltdl/config-h.in,,
+ s,libltdl/Makefile.am,,
+ s,libltdl/Makefile.in,,"
+ case $my_filename in
+ Makefile.am)
+ my_fixup_non_subpackage_script=`echo "$my_fixup_non_subpackage_script"
| \
+ sed 's,libltdl/,,'`
+ my_fixup_inc_paths_script= ;;
+ Makefile.inc)
repl=$ltdldir
repl_uscore=`$ECHO "X$repl" | $Xsed -e 's,[[/.+-]],_,g'`
- $RM "$my_destdir/$my_filename" 2>/dev/null
- $opt_quiet || func_echo "creating file \`$my_destdir/$my_filename'"
- if $opt_dry_run; then :;
- else
- $SED "\
+ my_fixup_inc_paths_script="\
s,libltdl_,@address@hidden,
s,libltdl/,@repl@/,
s,: libltdl/,: @repl@/,
s,\\\$(libltdl_,\$(@address@hidden,
s,)/libltdl ,)/@repl@ ,
s,@repl_uscore@,${repl_uscore},g
- s,@repl@,${repl},g
- " < "$my_srcdir/$my_filename" > "$my_destdir/$my_filename" ||
+ s,@repl@,${repl},g"
+ ;;
+ esac
+
+ $RM "$my_destdir/$my_filename" 2>/dev/null
+ $opt_quiet || func_echo "creating file \`$my_destdir/$my_filename'"
+ if $opt_dry_run; then :;
+ else
+ $SED "$my_fixup_non_subpackage_script
+ $my_fixup_inc_paths_script" \
+ < "$my_srcdir/$my_filename" > "$my_destdir/$my_filename" ||
func_fatal_error "cannot create $my_destdir/$my_filename"
fi
}
@@ -1057,48 +1086,6 @@
func_scan_files
- # These files are handled specially, depending on ltdl_mode:
- case $ltdl_mode in
- *recursive)
- glob_exclude_pkgltdl_files='Makefile.am|Makefile.in*|aclocal.m4|config*'
- ;;
- *)
- glob_exclude_pkgltdl_files='Makefile.inc'
- ;;
- esac
-
- func_massage_pkgltdl_files "$glob_exclude_pkgltdl_files"
- func_massage_pkgconfig_files
-
- # libtool.m4 and ltdl.m4 are handled specially below
- func_massage_aclocal_DATA 'libtool.m4|ltdl.m4'
-
- # Copy all the files from installed libltdl to this project, if the
- # user specified `--ltdl'.
- if $opt_ltdl; then
-
- # For recursive ltdl modes, copy a suitable Makefile.{am,inc}:
- case $ltdl_mode in
- recursive) pkgltdl_files="Makefile.am:$pkgltdl_files" ;;
- esac
-
- func_copy_some_files "$pkgltdl_files" "$pkgltdldir/libltdl" "$ltdldir"
-
- case $ltdl_mode in
- nonrecursive) func_fixup_Makefile_inc "Makefile.inc"
"$pkgltdldir/libltdl" "$ltdldir" ;;
- esac
-
- # Unless we share CONFIG_MACRO_DIR with our parent project,
- # copy macros here.
- if test "$ltdldir/m4" != "$m4dir"; then
- func_copy_some_files "$pkgmacro_files:libtool.m4:ltdl.m4" \
- "$aclocaldir" "$ltdldir/m4"
- fi
-
- # Copy config aux files into libltdl.
- func_copy_some_files "$pkgconfig_files" "$pkgdatadir" "$ltdldir"
- fi
-
# Unless we share CONFIG_AUX_DIR with the libltdl subproject, then
# if they are newer, copy all the installed utility files to the
# auxiliary directory if `--install' was passed, or else copy just
@@ -1119,6 +1106,9 @@
func_verbose "AC_CONFIG_AUX_DIR not defined, not copying libtool auxiliary
files."
fi
+ # libtool.m4 and ltdl.m4 were handled specially above
+ func_massage_aclocal_DATA 'libtool.m4|ltdl.m4'
+
# Copy libtool's m4 macros to the macro directory, if they are newer.
if test -n "$m4dir"; then
$opt_quiet || func_echo "putting macros in AC_CONFIG_MACRO_DIR, \`$m4dir'."
@@ -1141,6 +1131,42 @@
IFS="$my_save_IFS"
fi
+ # These files are handled specially, depending on ltdl_mode:
+ case $ltdl_mode in
+ *recursive)
+ glob_exclude_pkgltdl_files='Makefile.am|Makefile.in*|aclocal.m4|config*'
+ ;;
+ *)
+ glob_exclude_pkgltdl_files='Makefile.inc'
+ ;;
+ esac
+
+ func_massage_pkgltdl_files "$glob_exclude_pkgltdl_files"
+ func_massage_pkgconfig_files
+
+ # Copy all the files from installed libltdl to this project, if the
+ # user specified `--ltdl'.
+ if $opt_ltdl; then
+
+ # Unless we share CONFIG_MACRO_DIR with our parent project,
+ # copy macros here.
+ if test "$ltdldir/m4" != "$m4dir"; then
+ func_copy_some_files "$pkgmacro_files:libtool.m4:ltdl.m4" \
+ "$aclocaldir" "$ltdldir/m4"
+ fi
+
+ func_copy_some_files "$pkgltdl_files" "$pkgltdldir/libltdl" "$ltdldir"
+
+ # For recursive ltdl modes, copy a suitable Makefile.{am,inc}:
+ case $ltdl_mode in
+ recursive) func_fixup_Makefile "Makefile.am" "$pkgltdldir/libltdl"
"$ltdldir" ;;
+ nonrecursive) func_fixup_Makefile "Makefile.inc" "$pkgltdldir/libltdl"
"$ltdldir" ;;
+ esac
+
+ # Copy config aux files into libltdl.
+ func_copy_some_files "$pkgconfig_files" "$pkgdatadir" "$ltdldir"
+ fi
+
$opt_quiet || func_check_macros
}
Index: tests/libtoolize.at
===================================================================
RCS file: /cvsroot/libtool/libtool/tests/libtoolize.at,v
retrieving revision 1.8
retrieving revision 1.9
diff -u -b -r1.8 -r1.9
--- tests/libtoolize.at 20 Nov 2005 10:33:27 -0000 1.8
+++ tests/libtoolize.at 12 Jun 2006 17:54:15 -0000 1.9
@@ -308,11 +308,19 @@
]])
AT_DATA(expout,
-[[libtoolize: linking file `ltdl/COPYING.LIB'
+[[libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `ltdl/m4'.
+libtoolize: linking file `ltdl/m4/libtool.m4'
+libtoolize: linking file `ltdl/m4/ltdl.m4'
+libtoolize: linking file `ltdl/m4/argz.m4'
+libtoolize: linking file `ltdl/m4/ltoptions.m4'
+libtoolize: linking file `ltdl/m4/ltsugar.m4'
+libtoolize: linking file `ltdl/m4/ltversion.m4'
+libtoolize: linking file `ltdl/m4/lt~obsolete.m4'
+libtoolize: linking file `ltdl/COPYING.LIB'
libtoolize: linking file `ltdl/README'
libtoolize: linking file `ltdl/Makefile.am'
libtoolize: linking file `ltdl/configure.ac'
-libtoolize: linking file `ltdl/aclocal.m4'
+libtoolize: copying file `ltdl/aclocal.m4'
libtoolize: linking file `ltdl/Makefile.in'
libtoolize: linking file `ltdl/config-h.in'
libtoolize: linking file `ltdl/configure'
@@ -349,14 +357,6 @@
libtoolize: linking file `ltdl/config/install-sh'
libtoolize: linking file `ltdl/config/missing'
libtoolize: linking file `ltdl/config/ltmain.sh'
-libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `ltdl/m4'.
-libtoolize: linking file `ltdl/m4/libtool.m4'
-libtoolize: linking file `ltdl/m4/ltdl.m4'
-libtoolize: linking file `ltdl/m4/argz.m4'
-libtoolize: linking file `ltdl/m4/ltoptions.m4'
-libtoolize: linking file `ltdl/m4/ltsugar.m4'
-libtoolize: linking file `ltdl/m4/ltversion.m4'
-libtoolize: linking file `ltdl/m4/lt~obsolete.m4'
]])
LT_AT_CHECK_LIBTOOLIZE([--ltdl], 0, expout)
Index: tests/testsuite.at
===================================================================
RCS file: /cvsroot/libtool/libtool/tests/testsuite.at,v
retrieving revision 1.41
retrieving revision 1.42
diff -u -b -r1.41 -r1.42
--- tests/testsuite.at 15 May 2006 16:14:24 -0000 1.41
+++ tests/testsuite.at 12 Jun 2006 17:54:15 -0000 1.42
@@ -19,7 +19,7 @@
# 02110-1301, USA.
m4_divert_push([PREPARE_TESTS])dnl
-: ${tst_dist=""}
+: ${tst_dist=dist}
: ${ACLOCAL=aclocal}
: ${AUTOHEADER=autoheader}
: ${AUTOCONF=autoconf}
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- libtool ChangeLog libtoolize.m4sh tests/libtool...,
Ralf Wildenhues <=