[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Libreboot] Thinkpad x200 with Libreboot 20160818: problem booting from
[Libreboot] Thinkpad x200 with Libreboot 20160818: problem booting from USB
Tue, 23 Aug 2016 09:20:35 +0200
I get strange behaviour with Libreboot 20160818 on Thinkpad x200. When Grub
shows up, I select "Boot from usb". It then loads the Trisquel menu where I
select whatever I want (e.g. install, boot from live cd) and I get the error
Error: USB mass storage stalled
Error: you need to load kernel first
Press any key to continue
I tried the same with another usb-stick with Tails and it booted without any
complaint (tried several times).
Other strange behaviour: sometimes I get a "kernel panic" message with the
uppercase led blinking and the system stops (this can occur with both sticks,
but with Tails the message just pops up a fraction of a second and then it
continues booting). Does anybody know what the problem could be?
BTW: flashing the x200 was very slow (due to bad connection with the clip I had
to reduce speed to 128 and it took 1.5 hours (!) - I also had to specify
manually the "MX25L6405D" with the -c option), but the content of the flash
chip seems to be correct (it said VERIFIED in the end).
Thx and greetings,
Enviado desde mi iPhone
- [Libreboot] Thinkpad x200 with Libreboot 20160818: problem booting from USB,
Marcel Maci <=