[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Libreboot] Bricked my c201

From: xdrudis
Subject: Re: [Libreboot] Bricked my c201
Date: Tue, 16 Feb 2016 22:08:35 +0100
User-agent: Mutt/1.5.23 (2014-03-12)

On Tue, Feb 16, 2016 at 04:55:55PM +0100, Albin wrote:
> I don't understand what you mean about pulling up. I guess that write
> protect isn't necessary since taking out the Screw should be enough, but
> if HOLD# needs to be connected, then I don't know how.

I think to pull up = ensure it means a logical 1 = make sure the voltage
is at the level adequate for a 1 = make sure the voltage is similar to the
voltage at VCC. By the way, I forgot what VCC meant (voltage collector to 
collector, from the times of BJT transistors, before MOSFET...? ), Disclaimer: I have
an academic trauma with electronics, due to administrative issues, not

>From the answer you got, HOLD# should be connected to VCC.

I don't know much how to avoid excessive current, though, or how
worrisome that risk is.

reply via email to

[Prev in Thread] Current Thread [Next in Thread]