[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Libreboot] T60 supported LCD panel update - IDtech N150U3-L01 (15.1
From: |
The Gluglug |
Subject: |
Re: [Libreboot] T60 supported LCD panel update - IDtech N150U3-L01 (15.1" 1600x1200) |
Date: |
Tue, 19 May 2015 11:30:11 +0100 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Icedove/31.6.0 |
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Can you send an EDID dump? Use i2cdump:
http://libreboot.org/docs/misc/index.html#get_edid_panelname
On 19/05/15 11:28, The Gluglug wrote:
>
>
> On 19/05/15 11:17, address@hidden wrote:
>> Hi,
>
>> the panel
>
>> IDtech N150U3-L01 (15.1" 1600x1200) listed as untested on
>
>> http://www.libreboot.org/docs/hcl/index.html#supported_t60_list
>
>> is working with libreboot on a T60 and inverter board P/N
>> 42T0078 FRU 42T0079.
>
>> One Issue: It doesn't show the "libreboot bootscreen", but the
>> installed operating system starts and everythings works fine so
>> far.
>
>> Any idea what is causing the problem? I tested with the newest
>> rom from http://www.libreboot.org/git/rom/libreboot_t60.tar.xz.
>
>> best regards,
>
>> chp
>
>
>
>
>
> I'm not sure what causes it, but you can use the serial out on the
> "Advanced Mini Dock" to see GRUB via a text-based (serial)
> console.
>
> See: http://libreboot.org/docs/hcl/index.html#supported_t60_list
> Commit:
> http://libreboot.org/gitweb/?p=libreboot.git;a=commitdiff;h=617e63e1d2e97a87d2e9d2e81b4b58a15a616888
>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAEBAgAGBQJVWxCzAAoJEP9Ft0z50c+UHOYH/iWsdODbcoc70VJ/gGCwmwlZ
KlFS+aRrHyTDQoXvMNApnVgyPhLM2eLWVMRKy1S2VNPL5Fbj3J0PAwLySmgImg7t
wu7UnkpUSwAVIGqXrsIROdcQqPM5rQa5iHXGhOl8A8rjv3tNqc0mmo+1JAAVGhYF
ePB4RN+ofL362vm9Jqxz5PzdgkFYIu6pcVVxGJ216/DgB+bVjNHDTzBOfFLf+aik
C2ZkaelHrE899BvNnj+9NUDWDWUyrWbNs5JpExcKZGKTyc2WwuUZ6SOBANoVizB2
X0s2t+COxEAtrVL530smaiecd5Zr8+Xv5Lv6/SEtLZZt3bIveitj3s55YbTGkFY=
=ZGv9
-----END PGP SIGNATURE-----