[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Libcdio-devel] Re: libcdio-0.83git on Solaris snv134 sees no drive

From: Rocky Bernstein
Subject: Re: [Libcdio-devel] Re: libcdio-0.83git on Solaris snv134 sees no drives
Date: Mon, 31 May 2010 20:52:53 -0400

I'll probably be heavily occupied the entire month of June  (DYLA10
conference at the end of the month).

Yes of course a new drive detection method is needed. I'd prefer a
general-purpose SCSI/MMC way to do this on Solaris such as by iterating over
the collection of SCSI devices.

On Mon, May 31, 2010 at 9:18 AM, Thomas Schmitt <address@hidden> wrote:

> Hi,
> directory /vol is gone forever on Solaris.
> vold was replaced by "Tamarack" which is based on
> hald. This happened back in 2006.
> So the drive detection of libcdio needs a new
> method. Obviously
>  /dev/[r]dsk/cNtNdN*
> are the device names of interest, although the
> real device files are in /devices. Those have
> names like
> /devices/address@hidden,0/address@hidden,1/address@hidden/address@hidden,0:c,raw
> ------------------------------------------------
> It has to be tested whether the usual failures
> of CD burning were imported together with hald.
> I can spot processes
>  hald-addon-storage
> but cannot get them to telling which drive they
> occupy. So i will eventually have to kill them
> all.
> Whether manual mounting of CD is possible on
> Solaris will have to be tested then.
> Have a nice day :)
> Thomas

reply via email to

[Prev in Thread] Current Thread [Next in Thread]