[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re[2]: How Tune PID in octave using Frequency Response data
From: |
Chris Manning |
Subject: |
Re[2]: How Tune PID in octave using Frequency Response data |
Date: |
Fri, 24 Jul 2020 10:00:41 -0400 |
Your request jogged my memory. I assume that SciLab are a competitor of
Octave. The thing that I like about SciLab is that the windoze install didn't
throw up a list of 33 unresolved dependencies.
If I understand correctly not only is SciLab open source, and therefore could
be a source of routines to be put into Octave, any toolsets also could be
useful. Tuning PID loops should fit neatly in their system for dynamic
packages.
SciLab.org
Why Model-Based Design?
http://www.modelbaseddesign.at/
Embedded Adaptive Self-Tuning Control Development by a Free Toolchain
http://www.hrpub.org/download/20150730/UJCA3-15004086.pdf
Input design and parameter estimation with open source tools
https://www.tu-ilmenau.de/fileadmin/public/regelungstechnik/Mitarbeiter/Prof_Johann_Reger/reger_MATHMOD2015.pdf
Model based design (MBD) – a free tool-chain
Simon Mayr, (Gernot Grabmair)
Simon Mayr, University of Applied Sciences
Upper Austria , Austria
https://www.scilab.org/content/download/1702/15077/file/AustriaUniversity_ScilabTEC2014.pdf
ProtoFrame
http://www.modelbaseddesign.at/projects/protoframe/27-2/
Eng. Shady Mohsen blog: Spirograph
The following are some curves drawn by the spirograph code I wrote in Scilab
https://eng-shady-mohsen.blogspot.com/2011/07/spirograph.html
----- Original Message -----
From: Sergei Steshenko via Help-octave (help-octave@gnu.org)
Date: 07/24/20 09:47
To: help-octave@gnu.org
Subject: Re: How Tune PID in octave using Frequency Response data
On 24/07/2020 16:31, shall689 wrote:
> Hello,
>
> I have the frequency response data of a plant. What steps would I take to
> tune a PID in octave?
>
> Thanks,
> Stephen
>
>
Is your frequency response complex or just magnitude one ?
--Sergei.
- How Tune PID in octave using Frequency Response data, shall689, 2020/07/24
- Re: How Tune PID in octave using Frequency Response data, Sergei Steshenko, 2020/07/24
- Re: How Tune PID in octave using Frequency Response data, Nicklas SB Karlsson, 2020/07/24
- Re: How Tune PID in octave using Frequency Response data, shall689, 2020/07/24
- Re: How Tune PID in octave using Frequency Response data, N, 2020/07/27
- Re: How Tune PID in octave using Frequency Response data, shall689, 2020/07/28
- Re: How Tune PID in octave using Frequency Response data, N, 2020/07/28
- Re: How Tune PID in octave using Frequency Response data, N, 2020/07/28
- Re: How Tune PID in octave using Frequency Response data, Torsten Lilge, 2020/07/28
- Re: How Tune PID in octave using Frequency Response data, N, 2020/07/28
- Re: How Tune PID in octave using Frequency Response data, Torsten Lilge, 2020/07/29