[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
question about xlabel/ylabel position in octave with AquaTerm
From: |
Philippe Piot |
Subject: |
question about xlabel/ylabel position in octave with AquaTerm |
Date: |
Wed, 26 Feb 2014 04:08:20 -0600 |
Dear All,
I am using octave 3.6.4 on OS 10.8 with AquaTerm. In some of my plot
invoking xlabel (or ylabel), the text from xlabel/ylabel overlaps with
the axis (numerical) labels. I therefore tried to, e.g., shift the
xlabel lower so it does not overlap. I try relocating the xlabel and
ylabel positions as follows:
plot (x,y);
set (gca,'fontsize',14)
hx=xlabel ('MyXaxis (units)','fontsize',14)
hy=ylabel ('MyYaxis (units)','fontsize',14)
set (hx,'position',[30 280 0]);
set (hy,'position',[-10 300 0]);
The two lines have unfortunately no effects: the x- and y-label stays
at the same locations. I hope somebody could let me know what I am
doing wrong. I however noticed that if I do a
get (hx)
Ithe position is now set the value given in my set command ([30 280 0]]...
Thank you for your help,
-- Philippe.
- question about xlabel/ylabel position in octave with AquaTerm,
Philippe Piot <=