[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: residue() confusion
From: |
Henry F. Mollet |
Subject: |
Re: residue() confusion |
Date: |
Sat, 22 Sep 2007 16:17:29 -0700 |
User-agent: |
Microsoft-Entourage/11.1.0.040913 |
Your concern is justified. I don't know how to do partial fractions by hand
when there is multiplicity. Therefore I checked results by hand using s =
linspace (-4i, 4i, 9) as a first check. It appears that Matlab results are
correct if I take into account multiplicity of [1 2 1 2]. Octave results
appear to be incorrect.
Henry
octave-2.9.14:29> s =
-0 - 4i 0 - 3i 0 - 2i 0 - 1i 0 + 0i 0 + 1i 0 + 2i 0 + 3i 0
+ 4i
Using left hand side of equation:
octave-2.9.14:30> y=(s.^2 + 1)./(s.^4 + 18*s.^2 + 81)
y =
Columns 1 through 6:
-0.30612 + 0.00000i NaN + NaNi -0.12000 - 0.00000i 0.00000 -
0.00000i 0.01235 - 0.00000i 0.00000 - 0.00000i
Columns 7 through 9:
-0.12000 + 0.00000i NaN + NaNi -0.30612 + 0.00000i
Using right hand side of equation with partial fraction given by Matlab:
octave-2.9.14:31> yMatlab= (0 - 0.0926i)./(s-3i) + (0.2222 -
0.0000i)./(s-3i).^2 + (0 + 0.0926i)./(s+3i) + (0.2222 + 0.0000i)./(s+3i).^2
yMatlab =
Columns 1 through 6:
-0.30611 + 0.00000i NaN + NaNi -0.11997 + 0.00000i 0.00001 +
0.00000i 0.01236 + 0.00000i 0.00001 + 0.00000i
Columns 7 through 9:
-0.11997 + 0.00000i NaN + NaNi -0.30611 + 0.00000i
Using right hand side of equation with partial fraction given by Octave:
octave-2.9.14:32> yOctave=(-3.0108e+06 - 1.9734e+06i)./(s-3i) + (3.0108e+06
+ 1.9734e+06i)./(s-3i).^2 + (-3.0108e+06 + 1.9734e+06i)./(3+3i) +
(3.0108e+06 - 1.9734e+06i)./(s+3i).^2
yOctave =
Columns 1 through 5:
-2.9632e+06 + 2.3337e+06i NaN + NaNi -2.9095e+06 +
2.1230e+06i -6.2042e+05 + 4.4801e+05i -1.8417e+05 - 1.7290e+05i
Columns 6 through 9:
-1.2708e+05 - 1.0447e+06i -1.3307e+06 - 4.0746e+06i NaN +
NaNi -5.2185e+06 + 1.9084e+06i
**********************************
on 9/22/07 2:14 PM, Ben Abbott at address@hidden wrote:
> I was more concerned about the differences in "a"
>
> I suppose I'll need to do a derivation and check the correct answer.
>
> On Sep 22, 2007, at 5:05 PM, Henry F. Mollet wrote:
>
>> The result for e should be [1 2 1 2] (multiplicity for both poles).
>> Note
>> that Matlab does not even give e. My mis-understanding of the
>> problem was
>> pointed out by Doug Stewart. Doug posted new code yesterday, which
>> I've
>> tried unsuccessfully, but I cannot be sure that I've implemented
>> residual.m
>> correctly. The corrected code still produced e = [1 1 1 1] for me.
>> Henry
>>
>>
>> on 9/22/07 1:31 PM, Ben Abbott at address@hidden wrote:
>>
>>>
>>> As a result of reading through Hodel's
>>> http://www.nabble.com/bug-in-residue.m-tf4475396.html post I
>>> decided to
>>> check to see how my Octave installation and my Matlab installation
>>> responded
>>> to the example
>>>
>>> Using Matlab v7.3
>>> --------------------------
>>> num = [1 0 1];
>>> den = [1 0 18 0 81];
>>> [a,p,k] = residue(num,den)
>>>
>>> a =
>>>
>>> 0 - 0.0926i
>>> 0.2222 - 0.0000i
>>> 0 + 0.0926i
>>> 0.2222 + 0.0000i
>>>
>>>
>>> p =
>>>
>>> 0.0000 + 3.0000i
>>> 0.0000 + 3.0000i
>>> 0.0000 - 3.0000i
>>> 0.0000 - 3.0000i
>>>
>>>
>>> k =
>>>
>>> []
>>> --------------------------
>>>
>>> Using Octave 2.9.13 (via Fink) on Mac OSX
>>> --------------------------
>>> num = [1 0 1];
>>> den = [1 0 18 0 81];
>>> [a,p,k] = residue(num,den)
>>>
>>> a =
>>>
>>> -3.0108e+06 - 1.9734e+06i
>>> -3.0108e+06 + 1.9734e+06i
>>> 3.0108e+06 + 1.9734e+06i
>>> 3.0108e+06 - 1.9734e+06i
>>>
>>> p =
>>>
>>> -0.0000 + 3.0000i
>>> -0.0000 - 3.0000i
>>> 0.0000 + 3.0000i
>>> 0.0000 - 3.0000i
>>>
>>> k = [](0x0)
>>> e =
>>>
>>> 1
>>> 1
>>> 1
>>> 1
>>> --------------------------
>>>
>>> These are different from both the result that
>>> http://www.nabble.com/bug-in-residue.m-tf4475396.html Hodel
>>> obtained , as
>>> well as different from
>>> http://www.nabble.com/bug-in-residue.m-tf4475396.html Mollet's
>>>
>>> Thoughts anyone?
>>>
>>
>>
>
- Re: residue() confusion,
Henry F. Mollet <=
- Re: residue() confusion, Ben Abbott, 2007/09/23
- Re: residue() confusion, Doug Stewart, 2007/09/23
- Re: residue() confusion, Ben Abbott, 2007/09/23
- Re: residue() confusion, Doug Stewart, 2007/09/24
- Re: residue() confusion, Ben Abbott, 2007/09/24