[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
how to unmount disk after guix system init error?
From: |
znavko |
Subject: |
how to unmount disk after guix system init error? |
Date: |
Sun, 26 May 2019 12:09:54 +0000 |
Hello! I am trying to install Guix on other notebook. when I've parted it with
fdisk using such partitions:
/dev/sdb1 50Gb Linux filesystem
/dev/sdb2 9Gb Linux swap
then `guix system init /mnt/etc/config.scm /mnt` gave the error:
Embedding is not possible. Grub can only be installed in this setup by using
blocklists. However blocklists are UnreLIABLE and their use is discouraged.
guix system: error: failed to install bootloader
And this makes me sense need to do another partitioning like this:
/dev/sdb1 150Mb BIOS Boot
/dev/sdb2 50Gb Linux filesystem
/dev/sdb3 9Gb Linux swap
I cannot do this. I fullfilled this but making filesystem on /dev/sdb2 gives
the error, that device is mounted.
As I understand this is because of my run 'herd start cow-store /mnt' and also
run `guix system init .... /mnt`
I've stopped herd service. But do not know what to do else. So I can only
reboot and start again.
Please is there another way to solve?
- how to unmount disk after guix system init error?,
znavko <=