[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Grub on a Micron Trek 2.

From: Jordan Uggla
Subject: Re: Grub on a Micron Trek 2.
Date: Sat, 14 Jun 2014 00:01:20 -0700

On Wed, Jun 11, 2014 at 6:55 AM,  <address@hidden> wrote:
> Hi,
> An old Micron Trek 2 has an ext4 filesystem in (hd0,1),
> created with a Debian Wheezy installer.
> Grub was installed by removing the hdd and temporarily
> connecting it to a Wheezy system with a USB adapter.
> A /boot/grub/grub.cfg was created and edited to have a
> menu entry for a system in (hd0,5).
> When the machine is powered it comes to the prompt and
> these settings.

The most likely reason for this is that you don't have a grub.cfg in
(hd0,msdos1)/boot/grub/grub.cfg, or that grub.cfg doesn't have any
menu entries. Please post your complete grub.cfg as well as the output
of "grub-probe --target=device /boot/grub/grub.cfg" and
"grub-mkrelpath /boot/grub/grub.cfg".

Jordan Uggla (Jordan_U on

reply via email to

[Prev in Thread] Current Thread [Next in Thread]