|
| From: | Vikas Maurya |
| Subject: | Re: no peer visible |
| Date: | Mon, 3 Feb 2020 17:19:40 +0100 |
Hi,I used the following installation guide (compiled and installed using source code)but I am not sure if I followed the ./configure stepswhat can I do now to correct it?I tried running after killing all gnunet process, But wasn't able to run all services and got same error messages in log file.Thanks,VikasOn Mon, Feb 3, 2020 at 4:34 PM Schanzenbach, Martin <address@hidden> wrote:Hi,
did you follow one of the installation guides?
As what user are you trying to start GNUnet?
Did you follow the instructions printed after you did './configure'?
My guess the issue is with one of the above.
Also check if any gnunet processes are currently running and kill them before you try again.
BR
Martin
> On 3. Feb 2020, at 16:11, Vikas Maurya <address@hidden> wrote:
>
>
>
> ---------- Forwarded message ---------
> From: Vikas Maurya <address@hidden>
> Date: Mon, Feb 3, 2020 at 4:09 PM
> Subject: Re: no peer visible
> To: Schanzenbach, Martin <address@hidden>
>
>
> Hi,
> This is common sequence of errors in the log file. I have also attached log file for your reference. one more thing to mention when I run sudo ss -ntlp, I see that gnunet-service is already listening on port 2086, even before running gnunet-arm -s . Is this a common behaviour? because one of the error in log file says port already in used
> $ sudo ss -ntlp
> State Recv-Q Send-Q Local Address:Port Peer Address:Port
> LISTEN 0 5 0.0.0.0:2086 0.0.0.0:* users:(("gnunet-service-",pid=2144,fd=12))
> LISTEN 0 80 127.0.0.1:3306 0.0.0.0:* users:(("mysqld",pid=1783,fd=21))
> LISTEN 0 128 127.0.0.53%lo:53 0.0.0.0:* users:(("systemd-resolve",pid=891,fd=13))
> LISTEN 0 5 127.0.0.1:631 0.0.0.0:* users:(("cupsd",pid=12959,fd=7))
> LISTEN 0 5 [::]:2086 [::]:* users:(("gnunet-service-",pid=2144,fd=11))
> LISTEN 0 5 [::1]:631 [::]:* users:(("cupsd",pid=12959,fd=6))
> logfile output.
>
> <snip>
> 60 Feb 03 16:00:25-207988 revocation-22631 ERROR `mkdir' failed on file `/tmp/gnunet-system-runtime//gnunet-service-revocation.sock' at service.c:1140 with error: Permission denied
> 61 Feb 03 16:00:25-208096 nse-22642 ERROR Could not bind to any of the ports I was supposed to, refusing to run!
> 62 Feb 03 16:00:25-208239 util-service-22631 ERROR `bind' failed at service.c:1405 with error: Permission denied
> 63 Feb 03 16:00:25-208281 revocation-22631 ERROR `bind' failed at service.c:1558 with error: Success
> 64 Feb 03 16:00:25-208304 revocation-22631 ERROR Could not bind to any of the ports I was supposed to, refusing to run!
> 65 Feb 03 16:00:25-208924 arm-22628 WARNING Service `nse' terminated with status exit/255, will restart in 4 ms
> 66 Feb 03 16:00:25-209153 arm-22628 WARNING Service `revocation' terminated with status exit/255, will restart in 1 ms
> 67 Feb 03 16:00:25-215409 gns-22632 ERROR `mkdir' failed on file `/tmp/gnunet-system-runtime//gnunet-service-gns.sock' at service.c:1140 with error: Permission denied
> 68 Feb 03 16:00:25-215592 util-service-22632 ERROR `bind' failed at service.c:1405 with error: Permission denied
> 69 Feb 03 16:00:25-215627 gns-22632 ERROR `bind' failed at service.c:1558 with error: Success
> 70 Feb 03 16:00:25-215648 gns-22632 ERROR Could not bind to any of the ports I was supposed to, refusing to run!
> 71 Feb 03 16:00:25-216175 revocation-22643 ERROR `mkdir' failed on file `/tmp/gnunet-system-runtime//gnunet-service-revocation.sock' at service.c:1140 with error: Permission denied
> 72 Feb 03 16:00:25-216303 util-service-22643 ERROR `bind' failed at service.c:1405 with error: Permission denied
> 73 Feb 03 16:00:25-216337 revocation-22643 ERROR `bind' failed at service.c:1558 with error: Success
> 74 Feb 03 16:00:25-216358 revocation-22643 ERROR Could not bind to any of the ports I was supposed to, refusing to run!
> 75 Feb 03 16:00:25-216345 arm-22628 WARNING Service `gns' terminated with status exit/255, will restart in 1 ms
> 76 Feb 03 16:00:25-216747 arm-22628 WARNING Service `revocation' terminated with status exit/255, will restart in 2 ms
> 77 Feb 03 16:00:25-219790 nse-22644 ERROR `mkdir' failed on file `/tmp/gnunet-system-runtime//gnunet-service-nse.sock' at service.c:1140 with error: Permission denied
> 78 Feb 03 16:00:25-219925 util-service-22644 ERROR `bind' failed at service.c:1405 with error: Permission denied
> 79 Feb 03 16:00:25-219951 nse-22644 ERROR `bind' failed at service.c:1558 with error: Success
> 80 Feb 03 16:00:25-219977 nse-22644 ERROR Could not bind to any of the ports I was supposed to, refusing to run!
> 81 Feb 03 16:00:25-220458 arm-22628 WARNING Service `nse' terminated with status exit/255, will restart in 8 ms
> 82 Feb 03 16:00:25-222676 gns-22645 ERROR `mkdir' failed on file `/tmp/gnunet-system-runtime//gnunet-service-gns.sock' at service.c:1140 with error: Permission denied
> 83 Feb 03 16:00:25-222770 util-service-22645 ERROR `bind' failed at service.c:1405 with error: Permission denied
> 84 Feb 03 16:00:25-222786 gns-22645 ERROR `bind' failed at service.c:1558 with error: Success
> 85 Feb 03 16:00:25-222795 gns-22645 ERROR Could not bind to any of the ports I was supposed to, refusing to run!
> 86 Feb 03 16:00:25-222919 revocation-22646 ERROR `mkdir' failed on file `/tmp/gnunet-system-runtime//gnunet-service-revocation.sock' at service.c:1140 with error: Permission denied
> 87 Feb 03 16:00:25-223009 util-service-22646 ERROR `bind' failed at service.c:1405 with error: Permission denied
> 88 Feb 03 16:00:25-223025 revocation-22646 ERROR `bind' failed at service.c:1558 with error: Success
>
> <snip>
>
> On Sun, Feb 2, 2020 at 10:55 PM Schanzenbach, Martin <address@hidden> wrote:
> Hi,
>
> it seems like your services fail to start. Can you post the output of your logfile(s)?
> (~/.cache/gnunet/)
>
> You may also open a bugreport on mantis if you want to attach files.
> Or you just copy relevant parts here.
>
> BR
> Martin
>
> > On 1. Feb 2020, at 21:37, Vikas Maurya <address@hidden> wrote:
> >
> > Hi,
> > I have recently installed gnunet(trying for the first time) and was trying single-user setup.
> > but after installation when I run gnunet-arm -s and gnunet-arm -I , I see that most of the services are being stopped and when I run gnunet-peerinfo -s, I do not see any output. also gnunet-peerinfo-gtk does not display any information.
> >
> >
> > <snip>
> > $gnunet-arm -s
> > $gnunet-arm -I
> > Services (excluding stopped services):
> > (started: 4 / failed: 6 / stopped: 30)
> > fs (binary='gnunet-service-fs', status=failed, exit_status=255, restart_delay='6 m')
> > revocation (binary='gnunet-service-revocation', status=failed, exit_status=255, restart_delay='6 m')
> > namestore (binary='gnunet-service-namestore', status=started)
> > gns (binary='gnunet-service-gns', status=failed, exit_status=255, restart_delay='6 m')
> > dht (binary='gnunet-service-dht', status=failed, exit_status=255, restart_delay='6 m')
> > cadet (binary='gnunet-service-cadet', status=failed, exit_status=255, restart_delay='6 m')
> > zonemaster (binary='gnunet-service-zonemaster', status=started)
> > zonemaster-monitor (binary='gnunet-service-zonemaster-monitor', status=started)
> > nse (binary='gnunet-service-nse', status=failed, exit_status=255, restart_delay='6 m')
> > topology (binary='gnunet-daemon-topology', status=started)
> >
> > <snip>
> >
> > can you please help me in identifying what I could have done wrong here.
> >
> > Thanks,
> > Vikas
>
| [Prev in Thread] | Current Thread | [Next in Thread] |