[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Help-gnu-radius] Client ip Address.
From: |
Jean Pierre Telschow |
Subject: |
[Help-gnu-radius] Client ip Address. |
Date: |
Thu, 6 Nov 2003 17:34:12 -0200 |
Gerald,
I have this configuration in my users file:
DEFAULT Auth-Type = System,
Simultaneous-Use = 1
Service-Type = Framed-User,
Framed-IP-Address = xxx.xxx.xxx.xxx+,
Framed-IP-Netmask = 255.255.255.248
But, the address attributed to my client is one of my firewall
address and no xxx.xxx.xxx.xxx, so, this cause ip address conflict. :-(
Thanks by you contact.
Jean Pierre Telschow
-----Original Message-----
From: Gerald [mailto:address@hidden
Sent: quinta-feira, 6 de novembro de 2003 17:12
To: Jean Pierre Telschow
Cc: address@hidden
Subject: Re: [Help-gnu-radius] (sem assunto)
On Thu, 6 Nov 2003, Jean Pierre Telschow wrote:
> How i can attrib a especific IP Address to a specific client ?
If your attrib database is mysql here is one example of how to do it:
mysql> select * from attrib where user_name = 'user1';
+-----------+--------------------+---------------------+------+
| user_name | attr | value | op |
+-----------+--------------------+---------------------+------+
| user1 | Framed-IP-Address | 216.223.199.89 | NULL |
| user1 | Framed-Netmask | 255.255.255.248 | NULL |
| user1 | Framed-Compression | Van-Jacobson-TCP-IP | NULL |
| user1 | Framed-MTU | 1500 | NULL |
| user1 | Port-Limit | 2 | NULL |
| user1 | Idle-Timeout | 2400 | NULL |
+-----------+--------------------+---------------------+------+
6 rows in set (0.01 sec)
Otherwise just add the entry in the users file on the username.
(Example:)
###
testuser Password = "testpass"
Service-Type = Framed-User,
Framed-Protocol = PPP,
Framed-IP-Address = 10.4.10.1,
Framed-IP-Netmask = 255.255.255.255
###
Please let me know if you mean "client" in a different context.
Gerald
- [Help-gnu-radius] Client ip Address.,
Jean Pierre Telschow <=