[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Help-gnu-radius] acct-terminate-cause is always 0
From: |
David Friedman |
Subject: |
Re: [Help-gnu-radius] acct-terminate-cause is always 0 |
Date: |
Fri, 1 Mar 2002 14:14:08 -0500 |
User-agent: |
Mutt/1.2.5i |
* Randy Smith (address@hidden) wrote:
> I'm setting up gnu-radius with postgres to to do accounting. Everything
> appears ok excecpt the acct-terminate-cause is always 0 (zero). Input and
> output values appear ok along with the other values. Just
> acct-terminate-cause appears broken.
>
> This is from my detail file:
> Thu Feb 28 21:41:24 2002
> User-Name = <snip>
> NAS-IP-Address = <snip>
> NAS-Port-Id = 20411
> NAS-Port-Type = Async
> Acct-Status-Type = Stop
> Acct-Delay-Time = 0
> Acct-Session-Id = 379743176
> Acct-Authentic = RADIUS
> Acct-Session-Time = 565
> Acct-Input-Octets = 89121
> Acct-Output-Octets = 457405
> Acct-Input-Packets = 2309
> Acct-Output-Packets = 1170
> Framed-Protocol = PPP
> Framed-IP-Address = <snip>
> Timestamp = 1014961284
> Request-Authenticator = Verified
>
> Using Redhat 7.2, postgres 7.2, gnu-radius 0.96. NAS boxes are all
> Ascend/Lucent 2000/4000/6000 chassis. When logging accounting to DTC Radius
> I get my standard cause codes. Radius is still being handled by DTC Radius.
>
> Do I need to do something special to get acct-terminate-cause?
>
Are you using the right dictionary files? Are you sure the NAS is sending
the attribute?
> Randy Smith
--
David Friedman (address@hidden)
www.irctoo.net - IRCtoo... because it's not just irc.