|
From: | Cornelius Lee |
Subject: | Re: [Health-dev] Development snapshot for upcoming 3.6 series [Was:Re: Health-dev Digest, Vol 97, Issue 3] |
Date: | Wed, 11 Sep 2019 09:10:20 +0000 |
Hi Luis,
I have tried to uninstall any traces of tryton but encountered the following error:
Cannot uninstall requirement tryton, not installed
Upon closer inspection, I notice the following:
pip 9.0.1 from /usr/lib/python3/dist-packages (python 3.6)
This would mean that pip is not installing the packages in the right location, ie.
~/.local/lib/python3.6/site-packages
However, I might be wrong on this(I suspect this might/might not have played an important role) but the following was what I did to get it up and running.
End of (bumpy)update: Gnuhealth-Client(snapshot_20190907).
However, I have noticed 2 problems:
Upon checking the DB, there is indeed, 3 data entries in the 'people' table.
This is further confirmed when testing with httpie with the following command:
The results are shown below(as documented in the respective URL):
HTTP/1.1 200 OK
Access-Control-Allow-Origin: *
Connection: close
Content-Length: 1342
Content-Type: application/json
Date: Wed, 11 Sep 2019 08:24:29 GMT
Server: gunicorn/19.7.1
[
[
{
"active": true,
"dob": "1984-10-05",
"education": "tertiary",
"ethnicity": "latino",
"gender": "f",
"id": "ITAPYT999HON",
"lastname": "Cordara",
"marital_status": "married",
"name": "Cameron",
"password": "$2b$12$Y9rX7PoTHRXhTO1H78Tan.8mVmyayGAUIveiYxu2Qeo0ZDRvJQ8/2",
"profession": "teacher",
"roles": [
"end_user",
"health_professional"
]
}
],
[
{
"active": true,
"dob": "1985-10-04",
"education": "tertiary",
"ethnicity": "latino",
"gender": "f",
"id": "ESPGNU777ORG",
"lastname": "Betz",
"marital_status": "married",
"name": "Ana",
"password": "$2b$12$cjrKVGYEKUwCmVDCtEnwcegcrmECTmeBz526AAD/ZqMGPWFpHJ4FW",
"profession": "teacher",
"roles": [
"end_user"
]
}
],
[
{
"active": true,
"dob": "2008-10-12",
"education": "tertiary",
"ethnicity": "latino",
"gender": "f",
"id": "ARGBUE111FAV",
"lastname": "Root",
"marital_status": "married",
"name": "Admin",
"password": "$2b$12$McKDNgArdHKbUssD1fj64ecpdbJGMIt29ns7DGvqzqIT26W0dtJzi",
"profession": "System Administrator",
"roles": [
"root"
]
}
]
]
2. I am unable to log into the health DB via the gnuhealth 3.5 client even with the correct password.
I seem to be stuck at the password page. Any ideas about this?
Please advise me if I am on the right track or am I missing something out?
Thank you.
Kind Regards,
Cornelius
From: Cornelius Lee <address@hidden>
Sent: Wednesday, September 11, 2019 9:58 AM To: Luis Falcon <address@hidden> Cc: address@hidden <address@hidden> Subject: Re: Development snapshot for upcoming 3.6 series [Was:Re: [Health-dev] Health-dev Digest, Vol 97, Issue 3]
Hi Luis,
Thank you for your email and advice.
I was on leave yesterday and will be trying this out now and report back as instructed.
I look forward to the upcoming Gnuhealth 3.6 Client component too.
Kind Regards,
Cornelius
From: Luis Falcon <address@hidden>
Sent: Tuesday, September 10, 2019 5:18 PM To: Cornelius Lee <address@hidden> Cc: address@hidden <address@hidden> Subject: Re: Development snapshot for upcoming 3.6 series [Was:Re: [Health-dev] Health-dev Digest, Vol 97, Issue 3] Hi Cornelius !
On Mon, 9 Sep 2019 09:04:41 +0000 Cornelius Lee <address@hidden> wrote: > Dear Luis, > > I have managed to install Gnuhealth3.5 server successfully. > However, I am having trouble installing Gnuhealth3.5-Client on my > machine. > > The following are my steps on the command-line: > > 1. pip install pycairo > 2. cd > /home/gnuhealth/gnuhealth_35_daily_sept7_2019/gnuhealth-client-35/ 3. > sudo python setup.py install 4. Resolved several dependancies.... > 5. gnuhealth-client > > I encounter the following error: > > File > "/home/gnuhealth/.local/lib/python3.6/site-packages/tryton/client.py". > line 108, in <module> import pygtk ModuleNotFoundError: No module > named 'pygtk' > > Please advise. Thanks for the feedback ! It looks like you have lingering old tryton clients around. GNU Health client 3.5 (upcoming 3.6) does not use anymore pygtk. Try uninstalling the tryton client : $ pip3 uninstall tryton Try it again and report, please. PS: I will upload to pypi soon a development / preview version of the client, so we can also try it from there. Thank you ! Luis -- Dr. Luis Falcon, M.D. President, GNU Solidario GNU Health: Freedom and Equity in Healthcare www.gnuhealth.org GPG Fingerprint :ACBF C80F C891 631C 68AA 8DC8 C015 E1AE 0098 9199 Join us at GNU Health Con 2019 https://www.gnuhealthcon.org |
build_logs.txt
Description: build_logs.txt
install_logs.txt
Description: install_logs.txt
[Prev in Thread] | Current Thread | [Next in Thread] |