[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v2 23/23] x86: add multiboot2 protocol support for relocatabl
From: |
Konrad Rzeszutek Wilk |
Subject: |
Re: [PATCH v2 23/23] x86: add multiboot2 protocol support for relocatable images |
Date: |
Tue, 11 Aug 2015 12:56:58 -0400 |
User-agent: |
Mutt/1.5.23 (2014-03-12) |
On Mon, Jul 20, 2015 at 04:29:18PM +0200, Daniel Kiper wrote:
> Add multiboot2 protocol support for relocatable images. Only GRUB2
> with relevant patches understands that feature. Older multiboot
You may want to enumerate what those 'relevant' patches are.
> protocol (regardless of version) compatible loaders ignore it
> and everything works as usual.
>
> Signed-off-by: Daniel Kiper <address@hidden>
> ---
> xen/arch/x86/boot/head.S | 46
> +++++++++++++++++++++++++++++--------
> xen/arch/x86/x86_64/asm-offsets.c | 1 +
> xen/include/xen/multiboot2.h | 13 +++++++++++
> 3 files changed, 50 insertions(+), 10 deletions(-)
>
> diff --git a/xen/arch/x86/boot/head.S b/xen/arch/x86/boot/head.S
> index d484f68..2520e48 100644
> --- a/xen/arch/x86/boot/head.S
> +++ b/xen/arch/x86/boot/head.S
> @@ -81,6 +81,13 @@ multiboot1_header_end:
> /* Align modules at page boundry. */
> mb2ht_init MB2_HT(MODULE_ALIGN), MB2_HT(REQUIRED)
>
> + /* Load address preference. */
> + mb2ht_init MB2_HT(RELOCATABLE), MB2_HT(OPTIONAL), \
> + sym_phys(start), /* Min load address. */ \
We could go straight to __start?
> + 0xffffffff, /* Max load address (4 GiB - 1). */ \
> + 0x200000, /* Load address alignment (2 MiB). */ \
> + MULTIBOOT2_LOAD_PREFERENCE_HIGH
> +
> /* Console flags tag. */
> mb2ht_init MB2_HT(CONSOLE_FLAGS), MB2_HT(OPTIONAL), \
> MULTIBOOT2_CONSOLE_FLAGS_EGA_TEXT_SUPPORTED
> @@ -176,30 +183,39 @@ efi_multiboot2_proto:
> lea MB2_fixed_sizeof(%rbx),%rcx
>
> 0:
> + /* Get Xen image base address from Multiboot2 information. */
> + cmpl $MULTIBOOT2_TAG_TYPE_BASE_ADDR,MB2_tag_type(%rcx)
> + jne 1f
> +
> + mov MB2_base_addr(%rcx),%ebp
> + sub $XEN_IMG_OFFSET,%rbp
> + jmp 4f
> +
> +1:
> /* Get EFI SystemTable address from Multiboot2 information. */
> cmpl $MULTIBOOT2_TAG_TYPE_EFI64,MB2_tag_type(%rcx)
> - jne 1f
> + jne 2f
>
> mov MB2_efi64_st(%rcx),%rsi
>
> /* Do not go into real mode on EFI platform. */
> movb $1,skip_realmode(%rip)
> - jmp 3f
> + jmp 4f
>
> -1:
> +2:
> /* Get EFI ImageHandle address from Multiboot2 information. */
> cmpl $MULTIBOOT2_TAG_TYPE_EFI64_IH,MB2_tag_type(%rcx)
> - jne 2f
> + jne 3f
>
> mov MB2_efi64_ih(%rcx),%rdi
> - jmp 3f
> + jmp 4f
>
> -2:
> +3:
> /* Is it the end of Multiboot2 information? */
> cmpl $MULTIBOOT2_TAG_TYPE_END,MB2_tag_type(%rcx)
> je run_bs
>
> -3:
> +4:
> /* Go to next Multiboot2 information tag. */
> add MB2_tag_size(%rcx),%ecx
> add $(MULTIBOOT2_TAG_ALIGN-1),%rcx
> @@ -297,14 +313,23 @@ multiboot2_proto:
> lea MB2_fixed_sizeof(%ebx),%ecx
>
> 0:
> + /* Get Xen image base address from Multiboot2 information. */
> + cmpl $MULTIBOOT2_TAG_TYPE_BASE_ADDR,MB2_tag_type(%ecx)
> + jne 1f
> +
> + mov MB2_base_addr(%ecx),%ebp
> + sub $XEN_IMG_OFFSET,%ebp
> + jmp 3f
> +
> +1:
> /* Get mem_lower from Multiboot2 information. */
> cmpl $MULTIBOOT2_TAG_TYPE_BASIC_MEMINFO,MB2_tag_type(%ecx)
> - jne 1f
> + jne 2f
>
> mov MB2_mem_lower(%ecx),%edx
> - jmp trampoline_bios_setup
> + jmp 3f
>
> -1:
> +2:
> /* EFI mode is not supported via legacy BIOS path. */
> cmpl $MULTIBOOT2_TAG_TYPE_EFI32,MB2_tag_type(%ecx)
> je mb2_too_old
> @@ -316,6 +341,7 @@ multiboot2_proto:
> cmpl $MULTIBOOT2_TAG_TYPE_END,MB2_tag_type(%ecx)
> je trampoline_bios_setup
>
> +3:
> /* Go to next Multiboot2 information tag. */
> add MB2_tag_size(%ecx),%ecx
> add $(MULTIBOOT2_TAG_ALIGN-1),%ecx
> diff --git a/xen/arch/x86/x86_64/asm-offsets.c
> b/xen/arch/x86/x86_64/asm-offsets.c
> index b7aed49..5345a9e 100644
> --- a/xen/arch/x86/x86_64/asm-offsets.c
> +++ b/xen/arch/x86/x86_64/asm-offsets.c
> @@ -172,6 +172,7 @@ void __dummy__(void)
> DEFINE(MB2_fixed_sizeof, sizeof(multiboot2_fixed_t));
> OFFSET(MB2_tag_type, multiboot2_tag_t, type);
> OFFSET(MB2_tag_size, multiboot2_tag_t, size);
> + OFFSET(MB2_base_addr, multiboot2_tag_base_addr_t, base_addr);
> OFFSET(MB2_mem_lower, multiboot2_tag_basic_meminfo_t, mem_lower);
> OFFSET(MB2_efi64_st, multiboot2_tag_efi64_t, pointer);
> OFFSET(MB2_efi64_ih, multiboot2_tag_efi64_ih_t, pointer);
> diff --git a/xen/include/xen/multiboot2.h b/xen/include/xen/multiboot2.h
> index 09ee64e..a63c4d6 100644
> --- a/xen/include/xen/multiboot2.h
> +++ b/xen/include/xen/multiboot2.h
> @@ -59,11 +59,17 @@
> #define MULTIBOOT2_HEADER_TAG_EFI_BS 7
> #define MULTIBOOT2_HEADER_TAG_ENTRY_ADDRESS_EFI32 8
> #define MULTIBOOT2_HEADER_TAG_ENTRY_ADDRESS_EFI64 9
> +#define MULTIBOOT2_HEADER_TAG_RELOCATABLE 10
>
> /* Header tag flags. */
> #define MULTIBOOT2_HEADER_TAG_REQUIRED 0
> #define MULTIBOOT2_HEADER_TAG_OPTIONAL 1
>
> +/* Where image should be loaded (suggestion not requirement). */
> +#define MULTIBOOT2_LOAD_PREFERENCE_NONE 0
> +#define MULTIBOOT2_LOAD_PREFERENCE_LOW 1
> +#define MULTIBOOT2_LOAD_PREFERENCE_HIGH 2
Would be good for all of this (with the other MULTIBOOT2..)
to be aligned on the same column-ish.
> +
> /* Header console tag console_flags. */
> #define MULTIBOOT2_CONSOLE_FLAGS_CONSOLE_REQUIRED 1
> #define MULTIBOOT2_CONSOLE_FLAGS_EGA_TEXT_SUPPORTED 2
> @@ -90,6 +96,7 @@
> #define MULTIBOOT2_TAG_TYPE_EFI_BS 18
> #define MULTIBOOT2_TAG_TYPE_EFI32_IH 19
> #define MULTIBOOT2_TAG_TYPE_EFI64_IH 20
> +#define MULTIBOOT2_TAG_TYPE_BASE_ADDR 21
>
> /* Multiboot 2 tag alignment. */
> #define MULTIBOOT2_TAG_ALIGN 8
> @@ -120,6 +127,12 @@ typedef struct {
> typedef struct {
> u32 type;
> u32 size;
> + u32 base_addr;
> +} multiboot2_tag_base_addr_t;
> +
> +typedef struct {
> + u32 type;
> + u32 size;
> char string[0];
> } multiboot2_tag_string_t;
>
> --
> 1.7.10.4
>
Otherwise, Reviewed-by: Konrad Rzeszutek Wilk <address@hidden>
- Re: [PATCH v2 23/23] x86: add multiboot2 protocol support for relocatable images,
Konrad Rzeszutek Wilk <=