[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Various build failures in current bzr tree

From: Lennart Sorensen
Subject: Re: Various build failures in current bzr tree
Date: Fri, 10 Feb 2012 14:12:26 -0500
User-agent: Mutt/1.5.20 (2009-06-14)

On Fri, Feb 10, 2012 at 08:01:23PM +0100, Vladimir 'φ-coder/phcoder' Serbinenko 
> I agree that it should be fixed but the question is how.

I can't think of a way that would work if the disks were in fact using
different setups, which they could be.

> No

OK, fair enough if the below worked then.

> >   Currently it only
> >tries to include partition table support for grub_device, which being
> >an md raid returns nothing.
> This is a problem. It should return the partmap of underlying device
> and we have code for that. What does grub-probe -t partmap -d
> /dev/mdX is?

address@hidden:~# grub-probe -t partmap -d /dev/md0


So that would be a problem of course.

address@hidden:~# cat /proc/mdstat 
Personalities : [raid1] [raid6] [raid5] [raid4] 
md1 : active raid5 sda3[0] sdb3[1]
      284773376 blocks super 1.2 level 5, 512k chunk, algorithm 2 [3/2] [UU_]
md0 : active raid1 sda2[0] sdb2[1]
      976884 blocks super 1.2 [2/2] [UU]
unused devices: <none>

md0 is /boot
md1 is /

When I do the final install I will probably but lvm on md1 and put /
and swap and other things on that.

Len Sorensen

reply via email to

[Prev in Thread] Current Thread [Next in Thread]