Re: Help needed to configure and compile gpsd to run on a Raspberry Pi 4 and NOT use systemd

[Gary E. Miller]

Yo Michael!

On Wed, 20 Nov 2024 20:27:18 +0000
Michael Simpson <mikie.simpson@gmail.com> wrote:

> here is the relevant bits from my servers -probably mangled by email
> 
>  remote          refid      st t when > poll reach   delay   offset   jitter
> ============================================================================
> *SHM(1)          .PPS.      0 l    - > 16  377   0.0000   0.0120   0.0006

Pretty good, the jitter could be a tad better.

> unfortunately I am still using systemd leading to issues with gaps
> using sockets -systemd preemptively grabs hold of the socket and I
> haven’’t worked out the correct incantation to stop it.

You could do what James suggests, or just remove the gpsd/systemd config
files.

> BTW the ntpleapfetch from ntpsec needs altered post install as the
> leap-seconds.list is no longer valid

What version of NTPSec?  I just looked at git head and it is fine there.

RGDS
GARY
---------------------------------------------------------------------------
Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
        gem@rellim.com  Tel:+1 541 382 8588

            Veritas liberabit vos. -- Quid est veritas?
    "If you can't measure it, you can't improve it." - Lord Kelvin