[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: enable BeiDou B1 and B2

From: Gary E. Miller
Subject: Re: enable BeiDou B1 and B2
Date: Sun, 2 Apr 2023 12:00:56 -0700

Yo Hans!

On Sun, 2 Apr 2023 18:06:45 +0200
Hans Mayer <> wrote:

> I am using ubxtool: Version 3.25.1~dev


> Option -h says:
>      BEIDOU        BeiDou B1. BEIDOU,5 for B1 and B2


> I realized that I have to run
> ubxtool --enable 'BEIDOU,2' localhost:gpsd:/dev/serial0
> if I want to enable B1 and B2 for BeiDou. In my case "5" has to be 
> replaced by "2".

Yeah, looking at gps/, the parameter is "2" instead of "5".

Should I chnage the help  from 5 to 2, or the code from 2 to 5?

> I am not sure if this is related to the device using behind. In my
> case it's a u-blox zed-f9p with  PROTVER=27.12

It is, ubxtool only works on u-blox devices, and the zed-f9p is one of
the few that supports the newer B2.

Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703  Tel:+1 541 382 8588

            Veritas liberabit vos. -- Quid est veritas?
    "If you can't measure it, you can't improve it." - Lord Kelvin

Attachment: pgpLgdX74RUPB.pgp
Description: OpenPGP digital signature

reply via email to

[Prev in Thread] Current Thread [Next in Thread]