[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: open SHM data only after cgps start
From: |
Gary E. Miller |
Subject: |
Re: open SHM data only after cgps start |
Date: |
Mon, 8 Feb 2021 15:12:45 -0800 |
Yo Hans!
On Mon, 8 Feb 2021 21:43:41 +0100
Hans Kurscheidt <lve0200@gmail.com> wrote:
> I located the problem in my HW. It was a ublox 6 which was apparently
> misconfigured by gpsd 3.22 (too old?)
I have many u-blox 6 that work just fine with gpsd 3.22. Can you
provide raw dumps or the receiver when it is not working?
gpspipe -W -n 100 > taw.log
> After a factory reset, I was
> able to see all NMEA messages via cat /dev/ttyACM0.
NMEA is not the prefereed way to operate a u-blox 6.
RGDS
GARY
---------------------------------------------------------------------------
Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
gem@rellim.com Tel:+1 541 382 8588
Veritas liberabit vos. -- Quid est veritas?
"If you can't measure it, you can't improve it." - Lord Kelvin
pgp2ut0T9RwFm.pgp
Description: OpenPGP digital signature
open SHM data only after cgps start, Hans Kurscheidt, 2021/02/06