[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Initialising a u-blox device.

From: Gary E. Miller
Subject: Re: Initialising a u-blox device.
Date: Wed, 20 May 2020 08:55:53 -0700

Yo David!

On Wed, 20 May 2020 16:43:26 +0100
"David J Taylor" <address@hidden> wrote:

> From my tests, it seems that my u-blox MAX-M8Q-0-10 may need to be
> set into a particular mode on startup, by send the appropriate
> configuration command (there is no flash or battery-backed RAM).

No need to test to know that.

> The
> default mode isn't quite what I want.  From searching the Web there
> seem to be a number of ways of doing this, some deprecated, so what
> would be the most appropriate way.  The command would be to enable
> Galileo.


> I'm using gpsd 3.17.

Oh.  Good luck with that...

Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
        address@hidden  Tel:+1 541 382 8588

            Veritas liberabit vos. -- Quid est veritas?
    "If you can't measure it, you can't improve it." - Lord Kelvin

Attachment: pgpqkdlIClHJw.pgp
Description: OpenPGP digital signature

reply via email to

[Prev in Thread] Current Thread [Next in Thread]