[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: M8T time offset

From: Denny Page
Subject: Re: M8T time offset
Date: Tue, 21 Jan 2020 13:24:24 -0800

I can test again with head. It’s been a few of weeks since I did it. Head and 
3.20 are identical, yes?

I wish I had better detail records. I’ve been waiting to perform a config reset 
and cold start until I could finish several long term surveys.


> On Jan 21, 2020, at 13:06, Gary E. Miller <address@hidden> wrote:
> Yo Denny!
> On Tue, 21 Jan 2020 12:31:36 -0800
> Denny Page <address@hidden> wrote:
>> So, I___ve been seeing a bit of a weird problem. I have an M8T that I___m
>> using with gpsd. The behavior I see is that gpsd oscillates every 30
>> minutes or so between reporting time correctly, and reporting time
>> off by 1 second. 
> What version of gpsd?  Something like you report was seen in gpsd
> versions before 3.20.
>> I am using gpsd 3.19, although I have tested with current head (3.20)
>> and see the same behavior.
> That is odd, I have not seen it in months.  reports of similar behavior stops
> a few months ago.
> ---------------------------------------------------------------------------
> Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
>       address@hidden  Tel:+1 541 382 8588
>           Veritas liberabit vos. -- Quid est veritas?
>    "If you can't measure it, you can't improve it." - Lord Kelvin

reply via email to

[Prev in Thread] Current Thread [Next in Thread]