[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Questions regarding Gpsd

From: Christopher Story
Subject: Re: Questions regarding Gpsd
Date: Tue, 21 Jan 2020 06:31:12 -0600

Can I implement a connection supervision for the gnss receiver , without accessing to the libgps?

sure you can do anything you want outside libgps/gpsd..

On Tue, 21 Jan 2020 at 11:09 AM, raaj lokanathan <address@hidden> wrote:

But I am curious. How can I control my gnss receiver through my application which is written on top of the libgps?

For example: turning off the gnss receiver. So from my application I should be able to send command to the gnss receiver to perform certain functions like turning it off.

On Tue, 21 Jan 2020 at 10:36 AM, Christopher Story <address@hidden> wrote:
dude.... type in "man gpsd" in google, you'll get what you need... 

then read, install gpsd and play...

then read some more.... 

Then check out the code... 

Then read some more...

repeat the above steps...

On Mon, Jan 20, 2020, 20:03 Gary E. Miller <address@hidden> wrote:
Yo raaj!

On Tue, 21 Jan 2020 09:54:04 +0800
raaj lokanathan <address@hidden> wrote:

> Hi, I can't find the manual pages?

You can't have looked very hard.

> Where can I find it?

> are there any
> ways to run the man command without installing Gpsd?

Yes.  "man" should be a standard part of every distribution.

Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
        address@hidden  Tel:+1 541 382 8588

            Veritas liberabit vos. -- Quid est veritas?
    "If you can't measure it, you can't improve it." - Lord Kelvin
Thanks and regards,

Raaj Lokanathan
Thanks and regards,

Raaj Lokanathan

reply via email to

[Prev in Thread] Current Thread [Next in Thread]