[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[gpsd-users] inspect rtcm messages going to zed-f9p

From: Svenn Are Bjerkem
Subject: [gpsd-users] inspect rtcm messages going to zed-f9p
Date: Thu, 18 Apr 2019 11:52:12 +0200

I am closely following the development on git so I may be a tad bit early with my question.

I try to use the ntrip:// functionality of gpsd to send correction data to the f9p. My gps board has a led which turns off when the gps is able to use the correction data. With u-center I have tested that the ntrip login data I provide give rtk solution. (the no-rtk led turns off). So far the led does not go off with gpsd.

I guess the f9p is using some very new rtcm sentences and I wonder if these are compiled into the rtcm3 driver of gpsd or if they can be configured in some way. I also wonder if there is a way to see in any log that rtcm is actually fetched from the caster and provided to the gps attached to gpsd.


reply via email to

[Prev in Thread] Current Thread [Next in Thread]