[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[gpsd-users] How to get 10Hz Device Readings

From: Jamie Dixon
Subject: [gpsd-users] How to get 10Hz Device Readings
Date: Wed, 12 Jul 2017 09:34:55 -0400

I am following up on the 2013 thread that Andre and Gary had regarding getting 10 readings a second ( I am also using the Adafruit Ultimate GPS (

We are trying to track our stock car at our local short track and want to get more readings than the default 1/second.  Ideally we would get 50/second but 10/second will do. Most races are determined by less than a 10th per lap.

The adafruit forum suggested that if I send:
$PMTK300,100,0,0,0,0*2C <cr><lf>
to the GPS breakout 

Is there a method already in the GPSD Api that I can do that?  Is there a setOutputSpeed(int) method that I might have overlooked to increase the data frame rate?

Thanks in advance

reply via email to

[Prev in Thread] Current Thread [Next in Thread]