|
Got some more error messages:
"No monitor matches Trimble TSIP."
gpsmon -D9 /dev/ttyACM0 /dev/ttyACM1 /dev/pps0 -l
gpsd-debug2.log
gpsmon:INFO: startup at 2016-09-22T15:36:45.000Z (1474558605)
gpsmon:INFO: opening GPS data source type 3 at '/dev/ttyACM0'
gpsmon:INFO: speed 9600, 8N1
gpsmon:SPIN: open(/dev/ttyACM0) -> 4 in gpsd_serial_open()
gpsmon:PROG: Probing "Garmin USB binary" driver...
gpsmon:INFO: attempting USB device enumeration.
gpsmon:INFO: 8087:8000 (bus 1, device 2)
gpsmon:INFO: 1d6b:0002 (bus 1, device 1)
gpsmon:INFO: 1e10:3300 (bus 3, device 3)
gpsmon:INFO: 1e10:3300 (bus 3, device 2)
gpsmon:INFO: 1d6b:0003 (bus 3, device 1)
gpsmon:INFO: 13d3:3394 (bus 2, device 6)
gpsmon:INFO: 1546:01a8 (bus 2, device 11)
gpsmon:INFO: 0403:6001 (bus 2, device 4)
gpsmon:INFO: 1d6b:0002 (bus 2, device 1)
gpsmon:INFO: vendor/product match with 091e:0003 not found
gpsmon:PROG: Probe not found "Garmin USB binary" driver...
gpsmon:PROG: Probing "GeoStar" driver...
gpsmon:PROG: Sent GeoStar packet id 0xc1
gpsmon:IO: => GPS: 5053474700c100010000000050924746
gpsmon:PROG: Probe not found "GeoStar" driver...
gpsmon:PROG: Probing "Trimble TSIP" driver...
gpsmon:INFO: speed 9600, 8O1
gpsmon:INFO: speed 9600, 8N1
gpsmon:PROG: Probe not found "Trimble TSIP" driver...
gpsmon:PROG: Probing "iSync" driver...
gpsmon:INFO: speed 9600, 8N1
gpsmon:IO: => GPS: @@@@\x0d\x0aMAW0C0B\x0d\x0a
gpsmon:INFO: speed 9600, 8N1
gpsmon:PROG: Probe not found "iSync" driver...
gpsmon:PROG: no probe matched...
gpsmon:INFO: gpsd_activate(1): activated GPS (fd 4)
gpsmon:WARN: KPPS:/dev/ttyACM0 kernel PPS unavailable, PPS
accuracy will suffer
gpsmon:PROG: PPS:/dev/ttyACM0 thread launched
gpsmon:WARN: TPPS:/dev/ttyACM0 ioctl(TIOCMIWAIT) failed: 22
Invalid argument
gpsmon:PROG: PPS:/dev/ttyACM0 die: TIOCMIWAIT Error
gpsmon:PROG: PPS:/dev/ttyACM0 gpsd_ppsmonitor exited.
On 09/22/2016 05:23 PM, Jorick Astrego
wrote:
Hi,
We are experiencing a problem with gpsd and a u-blox M8P (RTK)
After a irregular interval we get an error:
"Driver type switch failed"
In gpsmon, I can see an error about Trimble TSIP.
I also see "usb 2-4: ep 0x83 - rounding interval to 1024
microframes, ep desc says 2040 microframes" in the dmesg at that
point.
Somebody know what could be happening?
Met vriendelijke groet, With kind regards,
Jorick Astrego
Netbulae Virtualization Experts
| Tel: 053 20 30 270 | address@hidden | Staalsteden 4-3A | KvK 08198180 | | Fax: 053 20 30 271 | www.netbulae.eu | 7547 TA Enschede | BTW NL821234584B01 |
|