[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [gpsd-users] gps source detection problem (GNS1301 receiver, serial

From: Gary E. Miller
Subject: Re: [gpsd-users] gps source detection problem (GNS1301 receiver, serial port, gpsd 3.15 and current git, ARM cortex A8)
Date: Fri, 2 Oct 2015 11:58:25 -0700

Yo Arndt!

On Fri, 2 Oct 2015 09:24:54 +0200
Arndt Kritzner <address@hidden> wrote:

> > If you set the port properly before starting gpsd then you avoid
> > the lengthy autobaud sequence.  You can also compile gpsd for
> > just the GPS you are using to avoid trying to probe for GPS you
> > do not support.
> this is what I did. In my case the autobaud sequence never succeeds
> (at least not for some hours).

If you set the port to match the GPS before starting gpsd then the
problem is not related to the autobaud.  A good look with -D6 will
likely show your GPS type was not properly detected, maybe due to
over aggressive removal of unwanted GPS types.

Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
        address@hidden  Tel:+1 541 382 8588

Attachment: pgpOV7g6KMAGd.pgp
Description: OpenPGP digital signature

reply via email to

[Prev in Thread] Current Thread [Next in Thread]