Hi All,
Further details are as below:
I am having GARMIN 16X-HVS GPS(Uart based). I am running gpsd and then telnet, but not able to receive the data.
Below are the steps followed.
1. Changing the baud rate to 4800(As i can see NMEA format data at this baud rate)
stty -F /dev/ttySo 48002. Run gpsd
gpsd -N -D 5 /dev/ttyS03. telnet (gpsd client) as cgps and xgps are not able to run on Openwrt
telnet localhost 2947
{"class":"VERSION","release":"3.10","rev":"3.10","proto_major":3,"proto_minor":9}
?WATCH={"enable":true,"json":true};
{"class":"DEVICES","devices":[{"class":"DEVICE","path":"/dev/ttyS0","activated":"2015-09-10T06:09:37.704Z","native":0,"bps":4800,"parity":"N","stopbits":1,"cycle":1.00}]}
{"class":"WATCH","enable":true,"json":true,"nmea":false,"raw":0,"scaled":false,"timing":false,"split24":false,"pps":false}
After this no prints are coming.
Thanks,
Lokesh