Re: [gpsd-users] Feeding chrony from GPSD

[Yakov Shmulevich]

On Wed, Apr 2, 2014 at 4:15 PM, Yakov Shmulevich <address@hidden> wrote:

On Wed, Apr 2, 2014 at 3:18 PM, Miroslav Lichvar <address@hidden> wrote:

On Wed, Apr 02, 2014 at 03:03:46PM +0300, Yakov Shmulevich wrote:
> On Wed, Apr 2, 2014 at 1:56 PM, Miroslav Lichvar <address@hidden>wrote:

> > Are you using gpsd-3.10? There was a bug that it was sending samples
> > with time stamp from future and which were ignored by chronyd. You may
> > want to try an earlier version or git.
> >
>
> I am using 3.9. So, it should not work?

IIRC 3.9 worked fine with chrony SOCK.

Another thing to check is the socket path. Is chronyd configured with
the same path as is printed by gpsd -D 8? For example

gpsd:RAW: PPS using chrony socket: /var/run/chrony.ttyS0.sock

I'll check it. But this is exactly what I want to understand:

My device is connected to ttyUSB0 and ttyUSB1.

I am running gpsd as follow:

gpsd -b -n /dev/ttyUSB1

I put in chrony.conf the follow:

refclock SOCK /var/run/chrony.ttyUSB1.sock refid PPS

Is it right?

I am running gpsd -D 8, and it not print  "RAW: PPS using chrony socket: ..." at all.

--
Miroslav Lichvar