[gpsd-users] gpsd-3.3 hanging on with USB receiver

[Obscurus Obscurus]

Hi all!
I'm using Suse 11.3 with Digma M-1 gps-receiver.
Then i update gpsd to 3.3 i have a problem: after starting it works normally, but in few seconds stops with errors. 

Logs after starting:
gpsd:INFO: stashing device /dev/ttyUSB0 at slot 0
gpsd:INFO: running with effective group ID 16
gpsd:INFO: running with effective user ID 65534
gpsd:INFO: startup at 2011-11-04T07:55:54.000Z (1320393354)
gpsd:INFO: opening GPS data source type 3 at '/dev/ttyUSB0'
gpsd:INFO: speed 9600, 8N1
gpsd:INFO: speed 9600, 8O1
gpsd:INFO: speed 9600, 8N1
gpsd:INFO: gpsd_activate(): activated GPS (fd 6)
gpsd:INFO: speed 4800, 8N1
gpsd:INFO: /dev/ttyUSB0 identified as type SiRF binary (1.017695 sec @ 4800bps)
gpsd:DATA: packet from /dev/ttyUSB0 with {ONLINE|PACKET|DRIVER}
gpsd:DATA: SiRF: MND 0x02: time=1320389775.00 lat=xxxx lon=yyyy alt=207.29 track=0.00 speed=0.00 mode=3 status=1 hdop=1.00 used=8
gpsd:DATA: packet from /dev/ttyUSB0 with {ONLINE|TIME|LATLON|ALTITUDE|SPEED|TRACK|CLIMB|STATUS|MODE|DOP|PACKET|USED|CLEAR|REPORT}

Logs before error:
gpsd:DATA: packet from /dev/ttyUSB0 with {ONLINE|PACKET|DRIVER}
gpsd:INFO: speed 9600, 8N1
gpsd:INFO: speed 19200, 8N1
gpsd:INFO: speed 38400, 8N1
gpsd:INFO: speed 57600, 8N1
gpsd:INFO: speed 115200, 8N1
gpsd:INFO: speed 115200, 7N2
gpsd:INFO: speed 4800, 7N2
gpsd:INFO: speed 9600, 7N2
gpsd:INFO: speed 19200, 7N2
gpsd:INFO: speed 38400, 7N2
gpsd:INFO: speed 57600, 7N2
gpsd:INFO: speed 115200, 7N2
gpsd:INFO: hunt on /dev/ttyUSB0 failed (10.158941 sec since data)
gpsd:WARN: device read of /dev/ttyUSB0 returned error or packet sniffer failed sync (flags {ERROR})
gpsd:INFO: closing GPS=/dev/ttyUSB0 (6)
gpsd:INFO: reconnection attempt on device 0
gpsd:INFO: opening GPS data source type 3 at '/dev/ttyUSB0'
gpsd:ERROR: device open failed: Device or resource busy - retrying read-only
gpsd:ERROR: read-only device open failed: Device or resource busy
gpsd:ERROR: /dev/ttyUSB0: device activation failed.
gpsd:INFO: reconnection attempt on device 0
gpsd:INFO: opening GPS data source type 3 at '/dev/ttyUSB0'
...
and so on.

Can you help with this? Thanks.