[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: ubxtool port?
From: |
Gary E. Miller |
Subject: |
Re: ubxtool port? |
Date: |
Wed, 6 May 2020 12:37:35 -0700 |
Yo John!
On Wed, 6 May 2020 15:25:35 -0400
John Ackermann N8UR <address@hidden> wrote:
> On 5/6/20 3:13 PM, Gary E. Miller wrote:
>
> >> Ah, that may be it, then -- I was running through gpsd and I wasn't
> >> specifying port. What is the format for the -i? "USB", "UART",
> >> "UART1", etc.? And what is the default? (Neither is mentioned in
> >> the manpage.)
> >
> > The ZED-F9P doc is over 270 pages. No room to fir that in the
> > ubxtool mand page.
> >
> > You need to look at the u-blox doc for the decimal and hex values
> > to use.
>
> OK, knowing its decimal or hex is a good start; I naively would have
> thought it would be a name like "USB" (but it's fine that it's not).
After you read the u-blox doc you will see it is not so simple at all.
Different parts use different numbering schemes.
> If the default is indeed "current port" then that solves my problem
> and I shouldn't need to worry about specifying.
Yup.
> My copies of the interface and integration documents are very well
> electronically thumbed by now...
When I patch ubxtool I have to check from Antaris up to the 9's, plus
various flavors. Most of it is even correct.
RGDS
GARY
---------------------------------------------------------------------------
Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
address@hidden Tel:+1 541 382 8588
Veritas liberabit vos. -- Quid est veritas?
"If you can't measure it, you can't improve it." - Lord Kelvin
pgpRWCZCBX0a1.pgp
Description: OpenPGP digital signature
- ubxtool port?, John Ackermann N8UR, 2020/05/06
- Re: ubxtool port?, Fred Wright, 2020/05/06
- Re: ubxtool port?, John Ackermann N8UR, 2020/05/06
- Re: ubxtool port?, Gary E. Miller, 2020/05/06
- Re: ubxtool port?, John Ackermann N8UR, 2020/05/06
- Re: ubxtool port?,
Gary E. Miller <=
- ubxtool set GLONASS L1/L2, John Ackermann N8UR, 2020/05/06
- Re: ubxtool set GLONASS L1/L2, Gary E. Miller, 2020/05/06
- Re: ubxtool set GLONASS L1/L2, Gary E. Miller, 2020/05/06
- Re: ubxtool set GLONASS L1/L2, John Ackermann N8UR, 2020/05/06
- Re: ubxtool set GLONASS L1/L2, John Ackermann N8UR, 2020/05/06
- Re: ubxtool set GLONASS L1/L2, Gary E. Miller, 2020/05/06
- Re: ubxtool set GLONASS L1/L2, John Ackermann N8UR, 2020/05/06
- Re: ubxtool set GLONASS L1/L2, Gary E. Miller, 2020/05/06
- Re: ubxtool set GLONASS L1/L2, John Ackermann N8UR, 2020/05/06
Re: ubxtool port?, Gary E. Miller, 2020/05/06