|
From: | Lee Armstrong |
Subject: | Re: [gpsd-dev] [gpsd-users] Trimble TSIP Device |
Date: | Sat, 28 Nov 2015 13:48:08 +0000 |
Yo Lee!
On Tue, 24 Nov 2015 11:43:01 -0800 (PST)
"Lee Armstrong" <address@hidden> wrote:
> Yes 115200 is the default as well for this chip. And yes I do use
> stty to set the baud rate and parity before launching gpsd and it
> worked for the baud rate no problem at all. Then gpsd decides to
> change the parity on launch!
Then that would be a bug. gpsd is first supposed to try the existing
settings.
> I will have a look at the code and see if I can hack it together for
> this device and force the parity as gpsd is getting it very wrong and
> never (even after 1 week) gets it right!
Let us know what you find.
RGDS
GARY
---------------------------------------------------------------------------
Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
address@hidden Tel:+1 541 382 8588
[Prev in Thread] | Current Thread | [Next in Thread] |