[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[lsd0012] branch master updated: pass through
|
From: |
gnunet |
|
Subject: |
[lsd0012] branch master updated: pass through |
|
Date: |
Wed, 13 Nov 2024 22:57:50 +0100 |
This is an automated email from the git hooks/post-receive script.
martin-schanzenbach pushed a commit to branch master
in repository lsd0012.
The following commit(s) were added to refs/heads/master by this push:
new 6a2cf3b pass through
6a2cf3b is described below
commit 6a2cf3bd7f4d9582244ae0985e0afc6ad0ebe08c
Author: Martin Schanzenbach <schanzen@gnunet.org>
AuthorDate: Wed Nov 13 22:57:40 2024 +0100
pass through
---
draft-schanzen-cake.xml | 215 +++++++++++++++++++++++++++++-------------------
1 file changed, 132 insertions(+), 83 deletions(-)
diff --git a/draft-schanzen-cake.xml b/draft-schanzen-cake.xml
index 08bb3c5..5c19a85 100644
--- a/draft-schanzen-cake.xml
+++ b/draft-schanzen-cake.xml
@@ -187,8 +187,13 @@ pk_R | |
sk_e | |
ES,ETS | |
| |
- | InitiatorHello |
- | {pk_I,ServicesInfo} |
+ | InitiatorHello: |
+ | EphemeralKey |
+ | ReceiverKemChallenge |
+ | InitiatorNonce |
+ | InitiatorPkHash |
+ | {pk_I} |
+ | {ServicesInfo} |
+---------------------------------------------->|
| | pk_I
| | ES,ETS
@@ -197,11 +202,13 @@ ES,ETS | |
| | MS
| | [I,R]HTS
| | RATS
- | ReceiverHello |
+ | ReceiverHello: |
+ | HandshakeKemCiphertext |
+ | ReceiverNonce |
| {ServicesInfo} |
- | {ReceiverKemCiphertext} |
+ | {InitiatorKemChallenge} |
| {ReceiverFinished} |
- | [Application Payload] |
+ | *[Application Payload] |
|<----------------------------------------------+
dES | |
(d)HS | |
@@ -209,45 +216,33 @@ MS | |
[I,R]HTS | |
[I,R]ATS | |
| |
- | {InitiatorFinished} |
- | [Application Payload] |
+ | {InitiatorFinished} |
+ | *[Application Payload] |
+---------------------------------------------->|
| | IATS
| |
| |
| |
- | [Application Payload] |
+ | [Application Payload] |
|<--------------------------------------------->|
| |
v v
]]></artwork>
</figure>
<t>
- The Initiator creates the first message containing InitiatorHello
and the encrypted tuple (pk<sub>I</sub>,ServicesInfo)*ETS according to <xref
target="figure_swimlane"/> and <xref target="figure_key_schedule"/> using:
+ The Initiator creates the InitiatorHello message which includes the
encrypted tuple (pk<sub>I</sub>,ServicesInfo).
+ The fields are encrypted using a key derived from the ETS according
to <xref target="figure_swimlane"/>
+ and <xref target="figure_key_schedule"/>.
+ The ReceiverKemChallenge is computed as:
</t>
<ol>
<li>(ss<sub>R</sub>,c<sub>R</sub>) <- Encaps(pk<sub>R</sub>)</li>
</ol>
<t>
- pk<sub>I</sub> and <tt>ServicesInfo</tt> are encrypted using the
early secret ETS
- using ChaCha20-Poly1305 <xref target="RFC8439"/>.
- <!-- FIXME: Discuss IV. We may be able to use data from HKDF-Expand
for that -->
- </t>
- <t>
- I sends to R:
+ R processes the InitiatorHello as follows:
</t>
<ol>
- <li>InitiatorHello <- (c<sub>R</sub>,r<sub>I</sub>)</li>
- <li>(pk<sub>I</sub>,ServicesInfo)*ETS.</li>
- </ol>
- <t>
- R receives the first message, and processes it as defined in the
following.
- The encryption key ETS to decrypt the encrypted tuple
(pk<sub>I</sub>,<tt>ServicesInfo</tt>), the Handshake and Master Secrets are
generated according to <xref target="figure_key_schedule"/>.
- The secrets can also be generated as-needed and not necessarily all
at once.
- Note that IATS cannot be derived (yet) at this point.
- </t>
- <ol>
- <li>Verify that the message type is TBD</li>
+ <li>Verify that the message type is CORE_INITIATOR_HELLO</li>
<li>(ss<sub>R</sub>,c<sub>R</sub>) <- Decaps(sk<sub>R</sub>,
c<sub>R</sub>)</li>
<li>(ss<sub>e</sub>,c<sub>e</sub>) <- Encaps(pk<sub>e</sub>)</li>
<li>Generate ETS from <xref target="key_schedule"/> and decrypt
pk<sub>I</sub>.</li>
@@ -255,33 +250,46 @@ MS | |
<li>Generate RHTS and RATS from <xref target="key_schedule"/>.</li>
</ol>
<t>
- R sends to I:
+ The ETS, the Handshake and Master Secrets are generated according to
<xref target="figure_key_schedule"/>.
+ Note that IATS cannot be derived (yet) at this point.
+ R may now generate its ReceiverHello message:
</t>
<ol>
- <li>ReceiverHello <- (c<sub>e</sub>,r<sub>R</sub>)</li>
- <li>Create ReceiverFinished as per <xref
target="wire_formats"/>.</li>
- <li>(ServicesInfo, c<sub>I</sub>, ReceiverFinished)*RHTS.</li>
- <li>Optionally, R may already send application data encrypted with
RATS.</li>
+ <li>r<sub>R</sub> <- RandomUInt64()</li>
+ <li>Create ReceiverFinished as per <xref
target="cake_hs_proto"/>.</li>
+ <li>Encrypt ServicesInfo, c<sub>I</sub> and ReceiverFinished with a
key derived from RHTS.</li>
+ <li>Optionally, R may now already send application data encrypted
with RATS.</li>
</ol>
<t>
I processes the message received by R:
</t>
<ol>
- <li>Verify that the message type is TBD</li>
+ <li>Verify that the message type is CORE_RECEIVER_HELLO</li>
<li>ss<sub>e</sub> <- Decaps(sk<sub>e</sub>,c<sub>e</sub>)</li>
<li>Generate IHTS and RHTS from <xref target="key_schedule"/> and
decrypt ServicesInfo, c<sub>I</sub> and ReceiverFinished.</li>
<li>ss<sub>I</sub> <- Decaps(sk<sub>I</sub>,c<sub>I</sub>).</li>
- <li>Create ReceiverFinished as per <xref target="wire_formats"/> and
check against decrypted payload.</li>
- <li>Create IteratorFinished as per <xref
target="wire_formats"/>.</li>
+ <li>Create ReceiverFinished as per <xref target="cake_hs_proto"/>
and check against decrypted payload.</li>
+ <li>Create IteratorFinished as per <xref
target="cake_hs_proto"/>.</li>
+ <li>Send InteratorFinished message encrypted with the key derived
from IHTS to R</li>
</ol>
<t>
- I sends to R:
+ At this point we have a secure channel.
</t>
- <ol>
- <li>(InitiatorFinished)*IHTS</li>
- </ol>
<t>
- At this point we have a secure channel.
+ Note that for the handshake we do not use epochs or sequence numbers.
+ The reason for this is simple: DTLS uses epoch 0 for plaintext
messages.
+ Epoch 1 is reserved for payload encrypted with a key derived from
ETS.
+ However, we only have a single message that contains such a payload:
InitiatorHello.
+ Epoch 2 is reserved for payload encrypted with a key derived from
*HTS.
+ But we only have a single message that contains a payload encrypted
with a key
+ derived from RHTS: ReceiverHello.
+ We also only have a single message that contains a payload encrypted
with a key
+ derived from AHTS: InitiatorFinished.
+ Consequently, we do not need any signalling of Epochs until we
encrypt data using
+ *ATS secrets.
+ The optional application data that may already be sent by the
receiver after its first
+ handshake message or by the initiator after its second handshake
message, are
+ already wrapped inside an EncryptedMessage and have both Epoch and
sequence numbers set.
</t>
</section>
<section anchor="key_schedule" numbered="true" toc="default">
@@ -319,11 +327,11 @@ ss_e -> HKDF-Extract = Handshake Secret (HS)
ss_I -> HKDF-Extract = Master Secret (MS)
|
+-----> HKDF-Expand(., "i ap traffic",
- | InitiatorHello...ReceiverFinished)
+ | InitiatorHello...InitiatorFinished)
| = IATS_0
|
+-----> HKDF-Expand(., "r ap traffic",
- InitiatorHello...ReceiverFinished)
+ InitiatorHello...ReceiverHello)
= RATS_0
]]></artwork>
</figure>
@@ -353,24 +361,65 @@ nonce = HKDF-Expand ([I,R][A,H]TS, "iv", 12)
Implementations <bcp14>SHOULD</bcp14> delete old traffic secrets and
their derived keys.
</t>
</section>
- <section anchor="wire_formats" numbered="true" toc="default">
- <name>Wire Formats</name>
- <section anchor="message_hdr" numbered="true" toc="default">
- <name>Message Header</name>
+ <section anchor="cake_hs_proto" numbered="true" toc="default">
+ <name>The CAKE Handshake Protocol</name>
+ <t>
+ This section is named and structured to mimic <xref target="RFC9147"
section="5"/>.
+ </t>
+ <section anchor="timeout_retransmission" numbered="true" toc="default">
+ <name>Timeout and Retransmission</name>
+ <t>
+ CAKE reuses the logic for timeout and retransmission from <xref
target="RFC9147" section="5.8"/>.
+ It differs in that large flight sizes are not of concern for CAKE.
+ Similarly, the only Post-Handshake message relevant for CAKE is the
KeyUpdate message.
+ </t>
+ </section>
+ <section anchor="crypto_label" numbered="true" toc="default">
+ <name>Cryptographic Label Prefix</name>
<t>
- Any sent message is prepended with a <tt>MessageHeader</tt>:
+ <xref target="RFC8446" section="7.1"/> specifies that
HKDF-Expand-Label uses a label prefix of "tls13 ".
+ For CAKE, that label <bcp14>SHALL</bcp14> be "cake ".
+ This ensures key separation between CAKE, DTLS 1.3 and TLS 1.3.
+ </t>
+ </section>
+ <section anchor="cake_hs_msg_fmt" numbered="true" toc="default">
+ <name>CAKE Handshake Message Format</name>
+ <t>
+ Any sent message in the handshake starts with a
<tt>MessageHeader</tt>:
</t>
<figure anchor="figure_msghdr" title="The Wire Format of the Message
Header.">
<artwork name="" type="" align="left" alt=""><![CDATA[
0 8 16 24 32 40 48 56
+-----+-----+-----+-----+-----+-----+-----+-----+
- | Size | Purpose (0xXX) |
+ | Size | Type (0xXX) |
+-----+-----+-----+-----+-----+-----+-----+-----+
]]></artwork>
</figure>
+ <dl>
+ <dt>size:</dt> <dd>The size of the message including the Size and
Type fields.</dd>
+ <dt>type:</dt> <dd>The message type.</dd>
+ </dl>
+ <t>
+ The possible types of messages are:
+ </t>
+ <ul>
+ <li>InitiatorHello</li>
+ <li>ReceiverHello</li>
+ <li>HandshakeFinished</li>
+ <li>KeyUpdate</li>
+ </ul>
+ </section>
+ <section anchor="svcinfo" numbered="true" toc="default">
+ <name>ServicesInfo String</name>
+ <t>
+ The ServicesInfo is a string consisting of key-value pairs separated
by
+ a separator indicating supported services and their versions.
+ E.g. "dht:1.1;cadet:0.4".
+ The ServicesInfo is zero terminated.
+ </t>
</section>
<section anchor="initiator_hello" numbered="true" toc="default">
- <name>InitiatorHello</name>
+ <name>InitiatorHello Message</name>
<t>
The InitiatorHello:
</t>
@@ -382,7 +431,8 @@ nonce = HKDF-Expand ([I,R][A,H]TS, "iv", 12)
| |
| |
+-----+-----+-----+-----+-----+-----+-----+-----+
- | KemCiphertext |
+ | InitiatorKemChallenge |
+ | |
| |
| |
+-----+-----+-----+-----+-----+-----+-----+-----+
@@ -392,30 +442,23 @@ nonce = HKDF-Expand ([I,R][A,H]TS, "iv", 12)
+-----+-----+-----+-----+-----+-----+-----+-----+
| Nonce |
+-----+-----+-----+-----+-----+-----+-----+-----+
+ / {pk_I,ServicesInfo} /
]]></artwork>
</figure>
<t>
- The KemCiphertext is generated according to <xref
target="figure_key_schedule"/> using:
+ The InitiatorKemChallenge is generated according to <xref
target="figure_key_schedule"/> using:
</t>
<ol>
<li>(ss<sub>R</sub>,c<sub>R</sub>) <- Encaps(pk<sub>R</sub>)</li>
</ol>
<t>
- The pk<sub>I</sub> and <tt>ServiceInfo</tt> are encrypted using
ChaCha20-Poly1305 <xref target="RFC8439"/>.
+ The pk<sub>I</sub> and <tt>ServiceInfo</tt> are encrypted using
ChaCha20-Poly1305 <xref target="RFC8439"/>
+ with key and IV derived from the ETS.
<!-- FIXME: Discuss IV. We may be able to use data from HKDF-Expand
for that -->
</t>
</section>
- <section anchor="svcinfo" numbered="true" toc="default">
- <name>ServicesInfo</name>
- <t>
- The ServicesInfo is a string consisting of key-value pairs separated
by
- a separator indicating supported services and their versions.
- E.g. "dht:1.1;cadet:0.4".
- The ServicesInfo is zero terminated.
- </t>
- </section>
<section anchor="receiver_hello" numbered="true" toc="default">
- <name>ReceiverHello</name>
+ <name>ReceiverHello Message</name>
<t>
The ReceiverHello:
</t>
@@ -423,37 +466,43 @@ nonce = HKDF-Expand ([I,R][A,H]TS, "iv", 12)
<artwork name="" type="" align="left" alt=""><![CDATA[
0 8 16 24 32 40 48 56
+-----+-----+-----+-----+-----+-----+-----+-----+
- | KemCiphertext |
+ | HandshakeKemCiphertext |
+ | |
| |
| |
+-----+-----+-----+-----+-----+-----+-----+-----+
| Nonce |
+-----+-----+-----+-----+-----+-----+-----+-----+
+ / {ServicesInfo,ReceiverKemCiphertext,Finished} /
]]></artwork>
</figure>
+ <t>
+ The protected fields after the nonce are encrypted using a key
derived from AHTS.
+ They are not encrypted individually but as a single payload.
+ </t>
</section>
- <section anchor="initiator_finished" numbered="true" toc="default">
- <name>InitiatorFinished</name>
+ <section anchor="handshake_finished" numbered="true" toc="default">
+ <name>Finished Field</name>
<t>
- The InitiatorFinished:
+ The HandshakeFinished field contains either InitiatorFinished
+ or ReceiverFinished value:
</t>
<ol>
<li>fk<sub>I</sub> <- HKDF-Expand(MS, "i finished", NULL)</li>
- <li>IF <- HMAC(fk<sub>I</sub>,
InitiatorHello...ReceiverFinished)</li>
- <li>InitiatorFinished <- Enc(IHTS, IF)</li>
+ <li>InitiatorFinished <- HMAC(fk<sub>I</sub>,
InitiatorHello...ReceiverFinished)</li>
+ <li>The InitiatorFinished message is encrypted using a key derived
from IHTS.</li>
</ol>
- </section>
- <section anchor="receiver_finished" numbered="true" toc="default">
- <name>ReceiverFinished</name>
- <t>
- The ReceiverFinished:
- </t>
<ol>
<li>fk<sub>R</sub> <- HKDF-Expand(MS, "r finished", NULL)</li>
<li>ReceiverFinished <- HMAC(fk<sub>R</sub>,
InitiatorHello...ReceiverKemCiphertext)</li>
- <li>(ReceiverFinished)*RHTS</li>
</ol>
</section>
+ <section anchor="ack_msg" numbered="true" toc="default">
+ <name>ACK</name>
+ <t>
+ The ACK message: See <xref target="RFC9147" section="7"/>.
+ </t>
+ </section>
<section anchor="encrypted_message" numbered="true" toc="default">
<name>EncryptedMessage</name>
<t>
@@ -473,11 +522,7 @@ nonce = HKDF-Expand ([I,R][A,H]TS, "iv", 12)
]]></artwork>
</figure>
<t>
- This is followed by encrypted application data.
- The length of the data is included in the size field of the
MessageHeader
- preceeding the EncryptedMessage header.
- </t>
- <t>
+ The epoch starts at 0 after the handshake with the first *ATS secret.
The sequence number is encrypted with the output as defined in <xref
target="RFC9147" section="4.2.3"/>
for ChaCha20-based AEAD schemes.
For clarity, the XOR-based encryption using the 64 byte output of
ChaCha20 is as follows:
@@ -489,6 +534,11 @@ nonce = HKDF-Expand ([I,R][A,H]TS, "iv", 12)
However, this will include the Epoch field and whatever value it was
set to so after
the XOR this value will have to be reconstructed or otherwise masked
beforehand.
</t>
+ <t>
+ The tag is followed by encrypted application data.
+ The length of the data is included in the size field of the
MessageHeader
+ preceeding the EncryptedMessage header.
+ </t>
<t>
The per-message nonce is not transmitted and instead generated as
defined in <xref target="RFC8446" section="5.3"/>.
<!-- FIXME the records/encryptions apply to all messages(?)-->
@@ -497,14 +547,13 @@ nonce = HKDF-Expand ([I,R][A,H]TS, "iv", 12)
<section anchor="key_update_msg" numbered="true" toc="default">
<name>KeyUpdate</name>
<t>
- The KeyUpdate message is a simple MessageHeader with type
<tt>CORE_KEY_UPDATE</tt>
- followed by a UpdateRequested indicator.
- It is always a payload inside an EncryptedMessage.
+ The KeyUpdate message is a simple MessageHeader inside an
EncryptedMessage with type <tt>CORE_KEY_UPDATE</tt>
+ followed by an UpdateRequested indicator.
This means that for every received EncryptedMessage
the peer <bcp14>MUST</bcp14> check if this is a KeyUpdate.
A KeyUpdate message indicates that the sender has switched its
traffic secrets
according to the key schedule in <xref target="key_schedule"/>.
- If any bit in the first byte of the UpdateRequested field is set,
this means that the receiver
+ If any bit in the UpdateRequested field is set, this means that the
receiver
of the KeyUpdate <bcp14>MUST</bcp14> send its own KeyUpdate message.
Any bytes following the UpdateRequested field are updated
ServicesInfo (<xref target="svcinfo"/>).
ServicesInfo updates are optional.
--
To stop receiving notification emails like this one, please contact
gnunet@gnunet.org.
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- [lsd0012] branch master updated: pass through,
gnunet <=