[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[taler-anastasis] branch master updated: debian: preseed debconf in prei
|
From: |
gnunet |
|
Subject: |
[taler-anastasis] branch master updated: debian: preseed debconf in preinst |
|
Date: |
Mon, 30 Aug 2021 22:39:57 +0200 |
This is an automated email from the git hooks/post-receive script.
dold pushed a commit to branch master
in repository anastasis.
The following commit(s) were added to refs/heads/master by this push:
new da795d9 debian: preseed debconf in preinst
da795d9 is described below
commit da795d9f4160ef1d39279c07f76481f2c7f7cb20
Author: Florian Dold <florian@dold.me>
AuthorDate: Mon Aug 30 22:39:52 2021 +0200
debian: preseed debconf in preinst
---
INSTALL | 6 +-
debian/anastasis-httpd.preinst | 29 +++
doc/texinfo.tex | 418 +++++++++++++----------------------------
3 files changed, 161 insertions(+), 292 deletions(-)
diff --git a/INSTALL b/INSTALL
index 8865734..e82fd21 100644
--- a/INSTALL
+++ b/INSTALL
@@ -1,8 +1,8 @@
Installation Instructions
*************************
- Copyright (C) 1994-1996, 1999-2002, 2004-2016 Free Software
-Foundation, Inc.
+ Copyright (C) 1994-1996, 1999-2002, 2004-2017, 2020-2021 Free
+Software Foundation, Inc.
Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
@@ -225,7 +225,7 @@ order to use an ANSI C compiler:
and if that doesn't work, install pre-built binaries of GCC for HP-UX.
- HP-UX 'make' updates targets which have the same time stamps as their
+ HP-UX 'make' updates targets which have the same timestamps as their
prerequisites, which makes it generally unusable when shipped generated
files such as 'configure' are involved. Use GNU 'make' instead.
diff --git a/debian/anastasis-httpd.preinst b/debian/anastasis-httpd.preinst
new file mode 100644
index 0000000..2d6c261
--- /dev/null
+++ b/debian/anastasis-httpd.preinst
@@ -0,0 +1,29 @@
+#!/bin/bash
+
+# We prevent a few questions from being asked
+# upon installation by specifying defaults. Namely,
+# we want the database to be accessed via Unix domain
+# sockets and password-less.
+
+set -e
+
+# When purging this package after the selections in the preinst have been made,
+# the debconf database is left in an inconsistent state and the package cannot
+# be installed again. This happens because dbconf-common will create a
+# template for these questions with a shared owner. Purging will only delete
+# one of the two templates, leading to a DB state where debconf-set-selections
+# fails. We work around this by manually fixing up the debconf database.
+#
+# Unfortunately we can't do this in "postrm", because during "postrm"
+# the configuration database is locked (even after db_stop).
+#
+# https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=487300
+if [ -x /usr/share/debconf/fix_db.pl ]; then
+ /usr/share/debconf/fix_db.pl || true
+fi
+
+echo anastasis-httpd anastasis-httpd/pgsql/method select Unix socket |
debconf-set-selections
+echo anastasis-httpd anastasis-httpd/pgsql/authmethod-user select ident |
debconf-set-selections
+echo anastasis-httpd anastasis-httpd/pgsql/app-pass password |
debconf-set-selections
+
+exit 0
diff --git a/doc/texinfo.tex b/doc/texinfo.tex
index 3c7051d..e48383d 100644
--- a/doc/texinfo.tex
+++ b/doc/texinfo.tex
@@ -3,9 +3,9 @@
% Load plain if necessary, i.e., if running under initex.
\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
%
-\def\texinfoversion{2020-10-24.12}
+\def\texinfoversion{2021-04-25.21}
%
-% Copyright 1985, 1986, 1988, 1990-2020 Free Software Foundation, Inc.
+% Copyright 1985, 1986, 1988, 1990-2021 Free Software Foundation, Inc.
%
% This texinfo.tex file is free software: you can redistribute it and/or
% modify it under the terms of the GNU General Public License as
@@ -572,9 +572,8 @@
\fi
}
-% @end foo executes the definition of \Efoo.
-% But first, it executes a specialized version of \checkenv
-%
+
+% @end foo calls \checkenv and executes the definition of \Efoo.
\parseargdef\end{%
\if 1\csname iscond.#1\endcsname
\else
@@ -1003,6 +1002,14 @@ where each line of input produces a line of output.}
\global\everypar = {}%
}
+% leave vertical mode without cancelling any first paragraph indent
+\gdef\imageindent{%
+ \toks0=\everypar
+ \everypar={}%
+ \ptexnoindent
+ \global\everypar=\toks0
+}
+
% @refill is a no-op.
\let\refill=\relax
@@ -1863,19 +1870,23 @@ output) for that.)}
\closein 1
\endgroup
%
- \def\xetexpdfext{pdf}%
- \ifx\xeteximgext\xetexpdfext
- \XeTeXpdffile "#1".\xeteximgext ""
- \else
- \def\xetexpdfext{PDF}%
+ % Putting an \hbox around the image can prevent an over-long line
+ % after the image.
+ \hbox\bgroup
+ \def\xetexpdfext{pdf}%
\ifx\xeteximgext\xetexpdfext
\XeTeXpdffile "#1".\xeteximgext ""
\else
- \XeTeXpicfile "#1".\xeteximgext ""
+ \def\xetexpdfext{PDF}%
+ \ifx\xeteximgext\xetexpdfext
+ \XeTeXpdffile "#1".\xeteximgext ""
+ \else
+ \XeTeXpicfile "#1".\xeteximgext ""
+ \fi
\fi
- \fi
- \ifdim \wd0 >0pt width \xeteximagewidth \fi
- \ifdim \wd2 >0pt height \xeteximageheight \fi \relax
+ \ifdim \wd0 >0pt width \xeteximagewidth \fi
+ \ifdim \wd2 >0pt height \xeteximageheight \fi \relax
+ \egroup
}
\fi
@@ -2673,8 +2684,6 @@ end
\definetextfontsizexi
-\message{markup,}
-
% Check if we are currently using a typewriter font. Since all the
% Computer Modern typewriter fonts have zero interword stretch (and
% shrink), and it is reasonable to expect all typewriter fonts to have
@@ -2682,68 +2691,14 @@ end
%
\def\ifmonospace{\ifdim\fontdimen3\font=0pt }
-% Markup style infrastructure. \defmarkupstylesetup\INITMACRO will
-% define and register \INITMACRO to be called on markup style changes.
-% \INITMACRO can check \currentmarkupstyle for the innermost
-% style.
-
-\let\currentmarkupstyle\empty
-
-\def\setupmarkupstyle#1{%
- \def\currentmarkupstyle{#1}%
- \markupstylesetup
-}
-
-\let\markupstylesetup\empty
-
-\def\defmarkupstylesetup#1{%
- \expandafter\def\expandafter\markupstylesetup
- \expandafter{\markupstylesetup #1}%
- \def#1%
-}
-
-% Markup style setup for left and right quotes.
-\defmarkupstylesetup\markupsetuplq{%
- \expandafter\let\expandafter \temp
- \csname markupsetuplq\currentmarkupstyle\endcsname
- \ifx\temp\relax \markupsetuplqdefault \else \temp \fi
-}
-
-\defmarkupstylesetup\markupsetuprq{%
- \expandafter\let\expandafter \temp
- \csname markupsetuprq\currentmarkupstyle\endcsname
- \ifx\temp\relax \markupsetuprqdefault \else \temp \fi
-}
-
{
\catcode`\'=\active
\catcode`\`=\active
-\gdef\markupsetuplqdefault{\let`\lq}
-\gdef\markupsetuprqdefault{\let'\rq}
-
-\gdef\markupsetcodequoteleft{\let`\codequoteleft}
-\gdef\markupsetcodequoteright{\let'\codequoteright}
+\gdef\setcodequotes{\let`\codequoteleft \let'\codequoteright}
+\gdef\setregularquotes{\let`\lq \let'\rq}
}
-\let\markupsetuplqcode \markupsetcodequoteleft
-\let\markupsetuprqcode \markupsetcodequoteright
-%
-\let\markupsetuplqexample \markupsetcodequoteleft
-\let\markupsetuprqexample \markupsetcodequoteright
-%
-\let\markupsetuplqkbd \markupsetcodequoteleft
-\let\markupsetuprqkbd \markupsetcodequoteright
-%
-\let\markupsetuplqsamp \markupsetcodequoteleft
-\let\markupsetuprqsamp \markupsetcodequoteright
-%
-\let\markupsetuplqverb \markupsetcodequoteleft
-\let\markupsetuprqverb \markupsetcodequoteright
-%
-\let\markupsetuplqverbatim \markupsetcodequoteleft
-\let\markupsetuprqverbatim \markupsetcodequoteright
-
% Allow an option to not use regular directed right quote/apostrophe
% (char 0x27), but instead the undirected quote from cmtt (char 0x0d).
% The undirected quote is ugly, so don't make it the default, but it
@@ -2906,7 +2861,7 @@ end
}
% @samp.
-\def\samp#1{{\setupmarkupstyle{samp}\lq\tclose{#1}\rq\null}}
+\def\samp#1{{\setcodequotes\lq\tclose{#1}\rq\null}}
% @indicateurl is \samp, that is, with quotes.
\let\indicateurl=\samp
@@ -2949,8 +2904,7 @@ end
\global\let'=\rq \global\let`=\lq % default definitions
%
\global\def\code{\begingroup
- \setupmarkupstyle{code}%
- % The following should really be moved into \setupmarkupstyle handlers.
+ \setcodequotes
\catcode\dashChar=\active \catcode\underChar=\active
\ifallowcodebreaks
\let-\codedash
@@ -3104,7 +3058,7 @@ end
\urefcatcodes
%
\global\def\urefcode{\begingroup
- \setupmarkupstyle{code}%
+ \setcodequotes
\urefcatcodes
\let&\urefcodeamp
\let.\urefcodedot
@@ -3225,8 +3179,8 @@ end
\def\kbdsub#1#2#3\par{%
\def\one{#1}\def\three{#3}\def\threex{??}%
\ifx\one\xkey\ifx\threex\three \key{#2}%
- \else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi
- \else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi
+ \else{\tclose{\kbdfont\setcodequotes\look}}\fi
+ \else{\tclose{\kbdfont\setcodequotes\look}}\fi
}
% definition of @key that produces a lozenge. Doesn't adjust to text size.
@@ -3243,7 +3197,7 @@ end
% monospace, don't change it; that way, we respect @kbdinputstyle. But
% if it isn't monospace, then use \tt.
%
-\def\key#1{{\setupmarkupstyle{key}%
+\def\key#1{{\setregularquotes
\nohyphenation
\ifmonospace\else\tt\fi
#1}\null}
@@ -3373,16 +3327,20 @@ end
{\obeylines
\globaldefs=1
\envdef\displaymath{%
-\tex
+\tex%
\def\thisenv{\displaymath}%
+\begingroup\let\end\displaymathend%
$$%
}
-\def\Edisplaymath{$$
+\def\displaymathend{$$\endgroup\end}%
+
+\def\Edisplaymath{%
\def\thisenv{\tex}%
\end tex
}}
+
% @inlinefmt{FMTNAME,PROCESSED-TEXT} and @inlineraw{FMTNAME,RAW-TEXT}.
% Ignore unless FMTNAME == tex; then it is like @iftex and @tex,
% except specified as a normal braced arg, so no newlines to worry about.
@@ -4343,82 +4301,8 @@ $$%
\doitemize{#1.}\flushcr
}
-% @alphaenumerate and @capsenumerate are abbreviations for giving an arg
-% to @enumerate.
-%
-\def\alphaenumerate{\enumerate{a}}
-\def\capsenumerate{\enumerate{A}}
-\def\Ealphaenumerate{\Eenumerate}
-\def\Ecapsenumerate{\Eenumerate}
-
% @multitable macros
-% Amy Hendrickson, 8/18/94, 3/6/96
-%
-% @multitable ... @end multitable will make as many columns as desired.
-% Contents of each column will wrap at width given in preamble. Width
-% can be specified either with sample text given in a template line,
-% or in percent of \hsize, the current width of text on page.
-
-% Table can continue over pages but will only break between lines.
-
-% To make preamble:
-%
-% Either define widths of columns in terms of percent of \hsize:
-% @multitable @columnfractions .25 .3 .45
-% @item ...
-%
-% Numbers following @columnfractions are the percent of the total
-% current hsize to be used for each column. You may use as many
-% columns as desired.
-
-
-% Or use a template:
-% @multitable {Column 1 template} {Column 2 template} {Column 3 template}
-% @item ...
-% using the widest term desired in each column.
-
-% Each new table line starts with @item, each subsequent new column
-% starts with @tab. Empty columns may be produced by supplying @tab's
-% with nothing between them for as many times as empty columns are needed,
-% ie, @tab@tab@tab will produce two empty columns.
-
-% @item, @tab do not need to be on their own lines, but it will not hurt
-% if they are.
-
-% Sample multitable:
-
-% @multitable {Column 1 template} {Column 2 template} {Column 3 template}
-% @item first col stuff @tab second col stuff @tab third col
-% @item
-% first col stuff
-% @tab
-% second col stuff
-% @tab
-% third col
-% @item first col stuff @tab second col stuff
-% @tab Many paragraphs of text may be used in any column.
-%
-% They will wrap at the width determined by the template.
-% @item@tab@tab This will be in third column.
-% @end multitable
-
-% Default dimensions may be reset by user.
-% @multitableparskip is vertical space between paragraphs in table.
-% @multitableparindent is paragraph indent in table.
-% @multitablecolmargin is horizontal space to be left between columns.
-% @multitablelinespace is space to leave between table items, baseline
-% to baseline.
-% 0pt means it depends on current normal line spacing.
-%
-\newskip\multitableparskip
-\newskip\multitableparindent
-\newdimen\multitablecolspace
-\newskip\multitablelinespace
-\multitableparskip=0pt
-\multitableparindent=6pt
-\multitablecolspace=12pt
-\multitablelinespace=0pt
% Macros used to set up halign preamble:
%
@@ -4466,8 +4350,6 @@ $$%
\go
}
-% multitable-only commands.
-%
% @headitem starts a heading row, which we typeset in bold. Assignments
% have to be global since we are inside the implicit group of an
% alignment entry. \everycr below resets \everytab so we don't have to
@@ -4484,14 +4366,8 @@ $$%
% default for tables with no headings.
\let\headitemcrhook=\relax
%
-% A \tab used to include \hskip1sp. But then the space in a template
-% line is not enough. That is bad. So let's go back to just `&' until
-% we again encounter the problem the 1sp was intended to solve.
-% --karl, nathan@acm.org, 20apr99.
\def\tab{\checkenv\multitable &\the\everytab}%
-% @multitable ... @end multitable definitions:
-%
\newtoks\everytab % insert after every tab.
%
\envdef\multitable{%
@@ -4506,9 +4382,8 @@ $$%
%
\tolerance=9500
\hbadness=9500
- \setmultitablespacing
- \parskip=\multitableparskip
- \parindent=\multitableparindent
+ \parskip=0pt
+ \parindent=6pt
\overfullrule=0pt
\global\colcount=0
%
@@ -4538,47 +4413,24 @@ $$%
% continue for many paragraphs if desired.
\halign\bgroup &%
\global\advance\colcount by 1
- \multistrut
+ \strut
\vtop{%
- % Use the current \colcount to find the correct column width:
+ \advance\hsize by -1\leftskip
+ % Find the correct column width
\hsize=\expandafter\csname col\the\colcount\endcsname
%
- % In order to keep entries from bumping into each other
- % we will add a \leftskip of \multitablecolspace to all columns after
- % the first one.
- %
- % If a template has been used, we will add \multitablecolspace
- % to the width of each template entry.
- %
- % If the user has set preamble in terms of percent of \hsize we will
- % use that dimension as the width of the column, and the \leftskip
- % will keep entries from bumping into each other. Table will start at
- % left margin and final column will justify at right margin.
- %
- % Make sure we don't inherit \rightskip from the outer environment.
\rightskip=0pt
\ifnum\colcount=1
- % The first column will be indented with the surrounding text.
- \advance\hsize by\leftskip
+ \advance\hsize by\leftskip % Add indent of surrounding text
\else
- \ifsetpercent \else
- % If user has not set preamble in terms of percent of \hsize
- % we will advance \hsize by \multitablecolspace.
- \advance\hsize by \multitablecolspace
- \fi
- % In either case we will make \leftskip=\multitablecolspace:
- \leftskip=\multitablecolspace
+ % In order to keep entries from bumping into each other.
+ \leftskip=12pt
+ \ifsetpercent \else
+ % If a template has been used
+ \advance\hsize by \leftskip
+ \fi
\fi
- % Ignoring space at the beginning and end avoids an occasional spurious
- % blank line, when TeX decides to break the line at the space before the
- % box from the multistrut, so the strut ends up on a line by itself.
- % For example:
- % @multitable @columnfractions .11 .89
- % @item @code{#}
- % @tab Legal holiday which is valid in major parts of the whole country.
- % Is automatically provided with highlighting sequences respectively
- % marking characters.
- \noindent\ignorespaces##\unskip\multistrut
+ \noindent\ignorespaces##\unskip\strut
}\cr
}
\def\Emultitable{%
@@ -4587,31 +4439,6 @@ $$%
\global\setpercentfalse
}
-\def\setmultitablespacing{%
- \def\multistrut{\strut}% just use the standard line spacing
- %
- % Compute \multitablelinespace (if not defined by user) for use in
- % \multitableparskip calculation. We used define \multistrut based on
- % this, but (ironically) that caused the spacing to be off.
- % See bug-texinfo report from Werner Lemberg, 31 Oct 2004 12:52:20 +0100.
-\ifdim\multitablelinespace=0pt
-\setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip
-\global\advance\multitablelinespace by-\ht0
-\fi
-% Test to see if parskip is larger than space between lines of
-% table. If not, do nothing.
-% If so, set to same dimension as multitablelinespace.
-\ifdim\multitableparskip>\multitablelinespace
-\global\multitableparskip=\multitablelinespace
-\global\advance\multitableparskip-7pt % to keep parskip somewhat smaller
- % than skip between lines in the table.
-\fi%
-\ifdim\multitableparskip=0pt
-\global\multitableparskip=\multitablelinespace
-\global\advance\multitableparskip-7pt % to keep parskip somewhat smaller
- % than skip between lines in the table.
-\fi}
-
\message{conditionals,}
@@ -5225,30 +5052,29 @@ $$%
\let\lbracechar\{%
\let\rbracechar\}%
%
+ % Non-English letters.
+ \def\AA{AA}%
+ \def\AE{AE}%
+ \def\DH{DZZ}%
+ \def\L{L}%
+ \def\OE{OE}%
+ \def\O{O}%
+ \def\TH{TH}%
+ \def\aa{aa}%
+ \def\ae{ae}%
+ \def\dh{dzz}%
+ \def\exclamdown{!}%
+ \def\l{l}%
+ \def\oe{oe}%
+ \def\ordf{a}%
+ \def\ordm{o}%
+ \def\o{o}%
+ \def\questiondown{?}%
+ \def\ss{ss}%
+ \def\th{th}%
%
\let\do\indexnofontsdef
%
- % Non-English letters.
- \do\AA{AA}%
- \do\AE{AE}%
- \do\DH{DZZ}%
- \do\L{L}%
- \do\OE{OE}%
- \do\O{O}%
- \do\TH{TH}%
- \do\aa{aa}%
- \do\ae{ae}%
- \do\dh{dzz}%
- \do\exclamdown{!}%
- \do\l{l}%
- \do\oe{oe}%
- \do\ordf{a}%
- \do\ordm{o}%
- \do\o{o}%
- \do\questiondown{?}%
- \do\ss{ss}%
- \do\th{th}%
- %
\do\LaTeX{LaTeX}%
\do\TeX{TeX}%
%
@@ -7144,7 +6970,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% But \@ or @@ will get a plain @ character.
\envdef\tex{%
- \setupmarkupstyle{tex}%
+ \setregularquotes
\catcode `\\=0 \catcode `\{=1 \catcode `\}=2
\catcode `\$=3 \catcode `\&=4 \catcode `\#=6
\catcode `\^=7 \catcode `\_=8 \catcode `\~=\active \let~=\tie
@@ -7370,7 +7196,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% If you want all examples etc. small: @set dispenvsize small.
% If you want even small examples the full size: @set dispenvsize nosmall.
% This affects the following displayed environments:
-% @example, @display, @format, @lisp
+% @example, @display, @format, @lisp, @verbatim
%
\def\smallword{small}
\def\nosmallword{nosmall}
@@ -7416,9 +7242,9 @@ might help (with 'rm \jobname.?? \jobname.??s')%
%
\maketwodispenvdef{lisp}{example}{%
\nonfillstart
- \tt\setupmarkupstyle{example}%
+ \tt\setcodequotes
\let\kbdfont = \kbdexamplefont % Allow @kbd to do something special.
- \gobble % eat return
+ \parsearg\gobble
}
% @display/@smalldisplay: same as @lisp except keep current font.
%
@@ -7576,7 +7402,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\def\setupverb{%
\tt % easiest (and conventionally used) font for verbatim
\def\par{\leavevmode\endgraf}%
- \setupmarkupstyle{verb}%
+ \setcodequotes
\tabeightspaces
% Respect line breaks,
% print special symbols as themselves, and
@@ -7617,7 +7443,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\tt % easiest (and conventionally used) font for verbatim
\def\par{\egroup\leavevmode\box\verbbox\endgraf\starttabbox}%
\tabexpand
- \setupmarkupstyle{verbatim}%
+ \setcodequotes
% Respect line breaks,
% print special symbols as themselves, and
% make each space count.
@@ -8036,7 +7862,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% leave the code in, but it's strange for @var to lead to typewriter.
% Nowadays we recommend @code, since the difference between a ttsl hyphen
% and a tt hyphen is pretty tiny. @code also disables ?` !`.
- \def\var##1{{\setupmarkupstyle{var}\ttslanted{##1}}}%
+ \def\var##1{{\setregularquotes\ttslanted{##1}}}%
#1%
\sl\hyphenchar\font=45
}
@@ -8145,11 +7971,18 @@ might help (with 'rm \jobname.?? \jobname.??s')%
}
\fi
+\let\E=\expandafter
+
% Used at the time of macro expansion.
% Argument is macro body with arguments substituted
\def\scanmacro#1{%
\newlinechar`\^^M
- \def\xeatspaces{\eatspaces}%
+ % expand the expansion of \eatleadingcr twice to maybe remove a leading
+ % newline (and \else and \fi tokens), then call \eatspaces on the result.
+ \def\xeatspaces##1{%
+ \E\E\E\E\E\E\E\eatspaces\E\E\E\E\E\E\E{\eatleadingcr##1%
+ }}%
+ \def\xempty##1{}%
%
% Process the macro body under the current catcode regime.
\scantokens{#1@comment}%
@@ -8202,6 +8035,11 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\unbrace{\gdef\trim@@@ #1 } #2@{#1}
}
+{\catcode`\^^M=\other%
+\gdef\eatleadingcr#1{\if\noexpand#1\noexpand^^M\else\E#1\fi}}%
+% Warning: this won't work for a delimited argument
+% or for an empty argument
+
% Trim a single trailing ^^M off a string.
{\catcode`\^^M=\other \catcode`\Q=3%
\gdef\eatcr #1{\eatcra #1Q^^MQ}%
@@ -8368,6 +8206,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\let\hash\relax
% \hash is redefined to `#' later to get it into definitions
\let\xeatspaces\relax
+ \let\xempty\relax
\parsemargdefxxx#1,;,%
\ifnum\paramno<10\relax\else
\paramno0\relax
@@ -8379,9 +8218,11 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\else \let\next=\parsemargdefxxx
\advance\paramno by 1
\expandafter\edef\csname macarg.\eatspaces{#1}\endcsname
- {\xeatspaces{\hash\the\paramno}}%
+ {\xeatspaces{\hash\the\paramno\noexpand\xempty{}}}%
\edef\paramlist{\paramlist\hash\the\paramno,}%
\fi\next}
+% the \xempty{} is to give \eatleadingcr an argument in the case of an
+% empty macro argument.
% \parsemacbody, \parsermacbody
%
@@ -8970,7 +8811,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\else
\ifhavexrefs
% We (should) know the real title if we have the xref values.
- \def\printedrefname{\refx{#1-title}{}}%
+ \def\printedrefname{\refx{#1-title}}%
\else
% Otherwise just copy the Info node name.
\def\printedrefname{\ignorespaces #1}%
@@ -9064,7 +8905,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% If the user specified the print name (third arg) to the ref,
% print it instead of our usual "Figure 1.2".
\ifdim\wd\printedrefnamebox = 0pt
- \refx{#1-snt}{}%
+ \refx{#1-snt}%
\else
\printedrefname
\fi
@@ -9099,28 +8940,30 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\else
% Reference within this manual.
%
- % Only output a following space if the -snt ref is nonempty; for
- % @unnumbered and @anchor, it won't be.
- \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}%
+ % Only output a following space if the -snt ref is nonempty, as the ref
+ % will be empty for @unnumbered and @anchor.
+ \setbox2 = \hbox{\ignorespaces \refx{#1-snt}}%
\ifdim \wd2 > 0pt \refx{#1-snt}\space\fi
%
% output the `[mynode]' via the macro below so it can be overridden.
\xrefprintnodename\printedrefname
%
- % But we always want a comma and a space:
- ,\space
- %
- % output the `page 3'.
- \turnoffactive \putwordpage\tie\refx{#1-pg}{}%
- % Add a , if xref followed by a space
- \if\space\noexpand\tokenafterxref ,%
- \else\ifx\ \tokenafterxref ,% @TAB
- \else\ifx\*\tokenafterxref ,% @*
- \else\ifx\ \tokenafterxref ,% @SPACE
- \else\ifx\
- \tokenafterxref ,% @NL
- \else\ifx\tie\tokenafterxref ,% @tie
- \fi\fi\fi\fi\fi\fi
+ \expandafter\ifx\csname SETtxiomitxrefpg\endcsname\relax
+ % But we always want a comma and a space:
+ ,\space
+ %
+ % output the `page 3'.
+ \turnoffactive \putwordpage\tie\refx{#1-pg}%
+ % Add a , if xref followed by a space
+ \if\space\noexpand\tokenafterxref ,%
+ \else\ifx\ \tokenafterxref ,% @TAB
+ \else\ifx\*\tokenafterxref ,% @*
+ \else\ifx\ \tokenafterxref ,% @SPACE
+ \else\ifx\
+ \tokenafterxref ,% @NL
+ \else\ifx\tie\tokenafterxref ,% @tie
+ \fi\fi\fi\fi\fi\fi
+ \fi
\fi\fi
\fi
\endlink
@@ -9187,9 +9030,8 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\fi\fi\fi
}
-% \refx{NAME}{SUFFIX} - reference a cross-reference string named NAME. SUFFIX
-% is output afterwards if non-empty.
-\def\refx#1#2{%
+% \refx{NAME} - reference a cross-reference string named NAME.
+\def\refx#1{%
\requireauxfile
{%
\indexnofonts
@@ -9216,7 +9058,6 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% It's defined, so just use it.
\thisrefX
\fi
- #2% Output the suffix in any case.
}
% This is the macro invoked by entries in the aux file. Define a control
@@ -9326,10 +9167,10 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\catcode`\[=\other
\catcode`\]=\other
\catcode`\"=\other
- \catcode`\_=\other
- \catcode`\|=\other
- \catcode`\<=\other
- \catcode`\>=\other
+ \catcode`\_=\active
+ \catcode`\|=\active
+ \catcode`\<=\active
+ \catcode`\>=\active
\catcode`\$=\other
\catcode`\#=\other
\catcode`\&=\other
@@ -9550,7 +9391,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\def\imagexxx#1,#2,#3,#4,#5,#6\finish{\begingroup
\catcode`\^^M = 5 % in case we're inside an example
\normalturnoffactive % allow _ et al. in names
- \def\xprocessmacroarg{\eatspaces}% in case we are being used via a macro
+ \makevalueexpandable
% If the image is by itself, center it.
\ifvmode
\imagevmodetrue
@@ -9576,7 +9417,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% On the other hand, if we are in the case of @center @image, we don't
% want to start a paragraph, which will create a hsize-width box and
% eradicate the centering.
- \ifx\centersub\centerV\else \noindent \fi
+ \ifx\centersub\centerV \else \imageindent \fi
%
% Output the image.
\ifpdf
@@ -11603,7 +11444,7 @@ directory should work if nowhere else does.}
\let> = \activegtr
\let~ = \activetilde
\let^ = \activehat
- \markupsetuplqdefault \markupsetuprqdefault
+ \setregularquotes
\let\b = \strong
\let\i = \smartitalic
% in principle, all other definitions in \tex have to be undone too.
@@ -11662,8 +11503,7 @@ directory should work if nowhere else does.}
@let|=@normalverticalbar
@let~=@normaltilde
@let\=@ttbackslash
- @markupsetuplqdefault
- @markupsetuprqdefault
+ @setregularquotes
@unsepspaces
}
}
@@ -11756,8 +11596,7 @@ directory should work if nowhere else does.}
@c Do this last of all since we use ` in the previous @catcode assignments.
@catcode`@'=@active
@catcode`@`=@active
-@markupsetuplqdefault
-@markupsetuprqdefault
+@setregularquotes
@c Local variables:
@c eval: (add-hook 'before-save-hook 'time-stamp)
@@ -11770,3 +11609,4 @@ directory should work if nowhere else does.}
@c vim:sw=2:
@enablebackslashhack
+
--
To stop receiving notification emails like this one, please contact
gnunet@gnunet.org.
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- [taler-anastasis] branch master updated: debian: preseed debconf in preinst,
gnunet <=