[GNUnet-SVN] [gnunet] branch master updated: gnunet-arm.1: lint and license

[gnunet]

This is an automated email from the git hooks/post-receive script.

ng0 pushed a commit to branch master
in repository gnunet.

The following commit(s) were added to refs/heads/master by this push:
     new 006b7d948 gnunet-arm.1: lint and license
006b7d948 is described below

commit 006b7d94863d1ed70f7d67142f62995190e50803
Author: ng0 <address@hidden>
AuthorDate: Sat Mar 9 09:24:20 2019 +0000

    gnunet-arm.1: lint and license
---
 doc/man/gnunet-arm.1 | 107 +++++++++++++++++++++++++++++----------------------
 1 file changed, 62 insertions(+), 45 deletions(-)

diff --git a/doc/man/gnunet-arm.1 b/doc/man/gnunet-arm.1
index b17e74a73..6acfeb7c7 100644
--- a/doc/man/gnunet-arm.1
+++ b/doc/man/gnunet-arm.1
@@ -1,58 +1,74 @@
+.\" This file is part of GNUnet.
+.\" Copyright (C) 2001-2019 GNUnet e.V.
+.\"
+.\" Permission is granted to copy, distribute and/or modify this document
+.\" under the terms of the GNU Free Documentation License, Version 1.3 or
+.\" any later version published by the Free Software Foundation; with no
+.\" Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts.  A
+.\" copy of the license is included in the file
+.\" ``FDL-1.3''.
+.\"
+.\" A copy of the license is also available from the Free Software
+.\" Foundation Web site at @url{http://www.gnu.org/licenses/fdl.html}.
+.\"
+.\" Alternately, this document is also available under the General
+.\" Public License, version 3 or later, as published by the Free Software
+.\" Foundation.  A copy of the license is included in the file
+.\" ``GPL3''.
+.\"
+.\" A copy of the license is also available from the Free Software
+.\" Foundation Web site at @url{http://www.gnu.org/licenses/gpl.html}.
+.\"
+.\" SPDX-License-Identifier: GPL3.0-or-later OR FDL1.3-or-later
+.\"
 .TH GNUNET\-ARM 1 "January 4, 2012" "GNUnet"
 .SH NAME
 gnunet\-arm \- control GNUnet services
 .SH SYNOPSIS
 .B gnunet\-arm
-.RI [ options ]
+.RI [-c\ FILENAME\ |\ --config=FILENAME]
+.RI [-e\ |\ --end]
+.RI [-h\ |\ --help]
+.RI [-L\ LOGLEVEL\ |\ --loglevel=LOGLEVEL]
+.RI [-i\ SERVICE\ |\ --init=SERVICE]
+.RI [-k\ SERVICE\ |\ --kill=SERVICE]
+.RI [-m\ |\ --monitor]
+.RI [-s\ |\ --start]
+.RI [-v\ |\ --version]
 .SH DESCRIPTION
-\fBgnunet\-arm\fP can be used to start or stop GNUnet services, including
-the ARM service itself.  The ARM service is a supervisor for GNUnet's
-service processes.  ARM starts services on-demand or as configured and
-re-starts them if they crash.
+\fBgnunet\-arm\fP can be used to start or stop GNUnet services, including the 
ARM service itself.
+The ARM service is a supervisor for GNUnet's service processes.
+ARM starts services on-demand or as configured and re-starts them if they 
crash.
 .SH OPTIONS
-.B
-.IP "\-c FILENAME,  \-\-config=FILENAME"
+.IP "\-c FILENAME\ | \-\-config=FILENAME"
 Use the configuration file FILENAME.
-.B
-.IP "\-e, \-\-end"
-Shutdown all GNUnet services (including ARM itself).  Running
-"gnunet-arm \-e" is the usual way to shutdown a GNUnet peer.
-.B
-.IP "\-h, \-\-help"
+.IP "\-e\ | \-\-end"
+Shutdown all GNUnet services (including ARM itself).
+Running "gnunet-arm \-e" is the usual way to shutdown a GNUnet peer.
+.IP "\-h\ | \-\-help"
 Print short help on options.
-.B
-.IP "\-L LOGLEVEL, \-\-loglevel=LOGLEVEL"
-Use LOGLEVEL for logging.  Valid values are DEBUG, INFO, WARNING and ERROR.
-.B
-.IP "\-i SERVICE,  \-\-init=SERVICE"
-Starts the specified SERVICE if it is not already running.  More specifically,
-this makes the service behave as if it were in the default services list.
-.B
-.IP "\-k SERVICE,  \-\-kill=SERVICE"
-Stop the specified SERVICE if it is running.  While this will kill the service
-right now, the service may be restarted immediately if other services depend
-on it (service is then started 'on-demand').  If the service used to be a 
'default'
-service, its default-service status will be revoked.  If the
-service was not a default service, it will just be (temporarily) stopped,
-but could be re-started on-demand at any time.
-.B
-.IP "\-m, \-\-monitor"
-Monitor service activity of ARM.  In this mode, the command will not terminate
-until the user presses CTRL-C.
-.B
-.IP "\-s, \-\-start"
-Start all GNUnet default services on this system (and also ARM).  Naturally,
-if a service is demanded by a default service, it will then also be started.
+.IP "\-L LOGLEVEL\ | \-\-loglevel=LOGLEVEL"
+Use LOGLEVEL for logging.
+Valid values are DEBUG, INFO, WARNING and ERROR.
+.IP "\-i SERVICE\ | \-\-init=SERVICE"
+Starts the specified SERVICE if it is not already running.
+More specifically, this makes the service behave as if it were in the default 
services list.
+.IP "\-k SERVICE\ | \-\-kill=SERVICE"
+Stop the specified SERVICE if it is running.
+While this will kill the service right now, the service may be restarted 
immediately if other services depend on it (service is then started 
'on-demand').
+If the service used to be a 'default' service, its default-service status will 
be revoked.
+If the service was not a default service, it will just be (temporarily) 
stopped, but could be re-started on-demand at any time.
+.IP "\-m\ | \-\-monitor"
+Monitor service activity of ARM.
+In this mode, the command will not terminate until the user presses CTRL-C.
+.IP "\-s\ | \-\-start"
+Start all GNUnet default services on this system (and also ARM).
+Naturally, if a service is demanded by a default service, it will then also be 
started.
 Running "gnunet-arm \-s" is the usual way to start a GNUnet peer.
-.B
-.IP "\-I, \-\-info"
+.IP "\-I\ | \-\-info"
 List all running services.
-.B
-.IP "\-v, \-\-version"
+.IP "\-v\ | \-\-version"
 Print GNUnet version number.
-.SH BUGS
-Report bugs by using Mantis <https://bugs.gnunet.org/> or by sending
-electronic mail to <address@hidden>
 .SH SEE ALSO
 gnunet\-config(1), gnunet\-setup(1)
 .PP
@@ -73,6 +89,7 @@ should give you access to the complete handbook,
 .PP
 will give you access to a tutorial for developers.
 .PP
-Depending on your installation, this information is also
-available in
+Depending on your installation, this information is also available in
 \fBgnunet\fP(7) and \fBgnunet-c-tutorial\fP(7).
+.SH BUGS
+Report bugs by using Mantis <https://bugs.gnunet.org/> or by sending 
electronic mail to <address@hidden>.

-- 
To stop receiving notification emails like this one, please contact
address@hidden