[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[GNUnet-SVN] r37073 - libmicrohttpd/m4
|
From: |
gnunet |
|
Subject: |
[GNUnet-SVN] r37073 - libmicrohttpd/m4 |
|
Date: |
Sun, 24 Apr 2016 18:17:53 +0200 |
Author: Karlson2k
Date: 2016-04-24 18:17:53 +0200 (Sun, 24 Apr 2016)
New Revision: 37073
Modified:
libmicrohttpd/m4/ax_append_compile_flags.m4
libmicrohttpd/m4/ax_append_flag.m4
libmicrohttpd/m4/ax_append_link_flags.m4
libmicrohttpd/m4/ax_check_compile_flag.m4
libmicrohttpd/m4/ax_check_link_flag.m4
libmicrohttpd/m4/ax_count_cpus.m4
libmicrohttpd/m4/ax_pthread.m4
libmicrohttpd/m4/pkg.m4
Log:
Updated m4 macros to latest versions
Modified: libmicrohttpd/m4/ax_append_compile_flags.m4
===================================================================
--- libmicrohttpd/m4/ax_append_compile_flags.m4 2016-04-24 15:16:39 UTC (rev
37072)
+++ libmicrohttpd/m4/ax_append_compile_flags.m4 2016-04-24 16:17:53 UTC (rev
37073)
@@ -4,7 +4,7 @@
#
# SYNOPSIS
#
-# AX_APPEND_COMPILE_FLAGS([FLAG1 FLAG2 ...], [FLAGS-VARIABLE], [EXTRA-FLAGS])
+# AX_APPEND_COMPILE_FLAGS([FLAG1 FLAG2 ...], [FLAGS-VARIABLE],
[EXTRA-FLAGS], [INPUT])
#
# DESCRIPTION
#
@@ -20,6 +20,8 @@
# the flags: "CFLAGS EXTRA-FLAGS FLAG". This can for example be used to
# force the compiler to issue an error when a bad flag is given.
#
+# INPUT gives an alternative input source to AC_COMPILE_IFELSE.
+#
# NOTE: This macro depends on the AX_APPEND_FLAG and
# AX_CHECK_COMPILE_FLAG. Please keep this macro in sync with
# AX_APPEND_LINK_FLAGS.
@@ -54,12 +56,12 @@
# modified version of the Autoconf Macro, you may extend this special
# exception to the GPL to apply to your modified version as well.
-#serial 4
+#serial 5
AC_DEFUN([AX_APPEND_COMPILE_FLAGS],
[AX_REQUIRE_DEFINED([AX_CHECK_COMPILE_FLAG])
AX_REQUIRE_DEFINED([AX_APPEND_FLAG])
for flag in $1; do
- AX_CHECK_COMPILE_FLAG([$flag], [AX_APPEND_FLAG([$flag], [$2])], [], [$3])
+ AX_CHECK_COMPILE_FLAG([$flag], [AX_APPEND_FLAG([$flag], [$2])], [], [$3],
[$4])
done
])dnl AX_APPEND_COMPILE_FLAGS
Modified: libmicrohttpd/m4/ax_append_flag.m4
===================================================================
--- libmicrohttpd/m4/ax_append_flag.m4 2016-04-24 15:16:39 UTC (rev 37072)
+++ libmicrohttpd/m4/ax_append_flag.m4 2016-04-24 16:17:53 UTC (rev 37073)
@@ -49,21 +49,23 @@
# modified version of the Autoconf Macro, you may extend this special
# exception to the GPL to apply to your modified version as well.
-#serial 2
+#serial 6
AC_DEFUN([AX_APPEND_FLAG],
-[AC_PREREQ(2.59)dnl for _AC_LANG_PREFIX
-AS_VAR_PUSHDEF([FLAGS], [m4_default($2,_AC_LANG_PREFIX[FLAGS])])dnl
-AS_VAR_SET_IF(FLAGS,
- [case " AS_VAR_GET(FLAGS) " in
- *" $1 "*)
- AC_RUN_LOG([: FLAGS already contains $1])
- ;;
- *)
- AC_RUN_LOG([: FLAGS="$FLAGS $1"])
- AS_VAR_SET(FLAGS, ["AS_VAR_GET(FLAGS) $1"])
- ;;
- esac],
- [AS_VAR_SET(FLAGS,["$1"])])
+[dnl
+AC_PREREQ(2.64)dnl for _AC_LANG_PREFIX and AS_VAR_SET_IF
+AS_VAR_PUSHDEF([FLAGS], [m4_default($2,_AC_LANG_PREFIX[FLAGS])])
+AS_VAR_SET_IF(FLAGS,[
+ AS_CASE([" AS_VAR_GET(FLAGS) "],
+ [*" $1 "*], [AC_RUN_LOG([: FLAGS already contains $1])],
+ [
+ AS_VAR_APPEND(FLAGS,[" $1"])
+ AC_RUN_LOG([: FLAGS="$FLAGS"])
+ ])
+ ],
+ [
+ AS_VAR_SET(FLAGS,[$1])
+ AC_RUN_LOG([: FLAGS="$FLAGS"])
+ ])
AS_VAR_POPDEF([FLAGS])dnl
])dnl AX_APPEND_FLAG
Modified: libmicrohttpd/m4/ax_append_link_flags.m4
===================================================================
--- libmicrohttpd/m4/ax_append_link_flags.m4 2016-04-24 15:16:39 UTC (rev
37072)
+++ libmicrohttpd/m4/ax_append_link_flags.m4 2016-04-24 16:17:53 UTC (rev
37073)
@@ -4,7 +4,7 @@
#
# SYNOPSIS
#
-# AX_APPEND_LINK_FLAGS([FLAG1 FLAG2 ...], [FLAGS-VARIABLE], [EXTRA-FLAGS])
+# AX_APPEND_LINK_FLAGS([FLAG1 FLAG2 ...], [FLAGS-VARIABLE], [EXTRA-FLAGS],
[INPUT])
#
# DESCRIPTION
#
@@ -19,6 +19,8 @@
# EXTRA-FLAGS FLAG". This can for example be used to force the linker to
# issue an error when a bad flag is given.
#
+# INPUT gives an alternative input source to AC_COMPILE_IFELSE.
+#
# NOTE: This macro depends on the AX_APPEND_FLAG and AX_CHECK_LINK_FLAG.
# Please keep this macro in sync with AX_APPEND_COMPILE_FLAGS.
#
@@ -52,12 +54,12 @@
# modified version of the Autoconf Macro, you may extend this special
# exception to the GPL to apply to your modified version as well.
-#serial 4
+#serial 5
AC_DEFUN([AX_APPEND_LINK_FLAGS],
[AX_REQUIRE_DEFINED([AX_CHECK_LINK_FLAG])
AX_REQUIRE_DEFINED([AX_APPEND_FLAG])
for flag in $1; do
- AX_CHECK_LINK_FLAG([$flag], [AX_APPEND_FLAG([$flag], [m4_default([$2],
[LDFLAGS])])], [], [$3])
+ AX_CHECK_LINK_FLAG([$flag], [AX_APPEND_FLAG([$flag], [m4_default([$2],
[LDFLAGS])])], [], [$3], [$4])
done
])dnl AX_APPEND_LINK_FLAGS
Modified: libmicrohttpd/m4/ax_check_compile_flag.m4
===================================================================
--- libmicrohttpd/m4/ax_check_compile_flag.m4 2016-04-24 15:16:39 UTC (rev
37072)
+++ libmicrohttpd/m4/ax_check_compile_flag.m4 2016-04-24 16:17:53 UTC (rev
37073)
@@ -55,10 +55,10 @@
# modified version of the Autoconf Macro, you may extend this special
# exception to the GPL to apply to your modified version as well.
-#serial 3
+#serial 4
AC_DEFUN([AX_CHECK_COMPILE_FLAG],
-[AC_PREREQ(2.59)dnl for _AC_LANG_PREFIX
+[AC_PREREQ(2.64)dnl for _AC_LANG_PREFIX and AS_VAR_IF
AS_VAR_PUSHDEF([CACHEVAR],[ax_cv_check_[]_AC_LANG_ABBREV[]flags_$4_$1])dnl
AC_CACHE_CHECK([whether _AC_LANG compiler accepts $1], CACHEVAR, [
ax_check_save_flags=$[]_AC_LANG_PREFIX[]FLAGS
@@ -67,7 +67,7 @@
[AS_VAR_SET(CACHEVAR,[yes])],
[AS_VAR_SET(CACHEVAR,[no])])
_AC_LANG_PREFIX[]FLAGS=$ax_check_save_flags])
-AS_IF([test x"AS_VAR_GET(CACHEVAR)" = xyes],
+AS_VAR_IF(CACHEVAR,yes,
[m4_default([$2], :)],
[m4_default([$3], :)])
AS_VAR_POPDEF([CACHEVAR])dnl
Modified: libmicrohttpd/m4/ax_check_link_flag.m4
===================================================================
--- libmicrohttpd/m4/ax_check_link_flag.m4 2016-04-24 15:16:39 UTC (rev
37072)
+++ libmicrohttpd/m4/ax_check_link_flag.m4 2016-04-24 16:17:53 UTC (rev
37073)
@@ -55,10 +55,11 @@
# modified version of the Autoconf Macro, you may extend this special
# exception to the GPL to apply to your modified version as well.
-#serial 3
+#serial 4
AC_DEFUN([AX_CHECK_LINK_FLAG],
-[AS_VAR_PUSHDEF([CACHEVAR],[ax_cv_check_ldflags_$4_$1])dnl
+[AC_PREREQ(2.64)dnl for _AC_LANG_PREFIX and AS_VAR_IF
+AS_VAR_PUSHDEF([CACHEVAR],[ax_cv_check_ldflags_$4_$1])dnl
AC_CACHE_CHECK([whether the linker accepts $1], CACHEVAR, [
ax_check_save_flags=$LDFLAGS
LDFLAGS="$LDFLAGS $4 $1"
@@ -66,7 +67,7 @@
[AS_VAR_SET(CACHEVAR,[yes])],
[AS_VAR_SET(CACHEVAR,[no])])
LDFLAGS=$ax_check_save_flags])
-AS_IF([test x"AS_VAR_GET(CACHEVAR)" = xyes],
+AS_VAR_IF(CACHEVAR,yes,
[m4_default([$2], :)],
[m4_default([$3], :)])
AS_VAR_POPDEF([CACHEVAR])dnl
Modified: libmicrohttpd/m4/ax_count_cpus.m4
===================================================================
--- libmicrohttpd/m4/ax_count_cpus.m4 2016-04-24 15:16:39 UTC (rev 37072)
+++ libmicrohttpd/m4/ax_count_cpus.m4 2016-04-24 16:17:53 UTC (rev 37073)
@@ -4,18 +4,21 @@
#
# SYNOPSIS
#
-# AX_COUNT_CPUS
+# AX_COUNT_CPUS([ACTION-IF-DETECTED],[ACTION-IF-NOT-DETECTED])
#
# DESCRIPTION
#
-# Attempt to count the number of processors present on the machine. If the
-# detection fails, then a value of 1 is assumed.
+# Attempt to count the number of logical processor cores (including
+# virtual and HT cores) currently available to use on the machine and
+# place detected value in CPU_COUNT variable.
#
-# The value is placed in the CPU_COUNT variable.
+# On successful detection, ACTION-IF-DETECTED is executed if present. If
+# the detection fails, then ACTION-IF-NOT-DETECTED is triggered. The
+# default ACTION-IF-NOT-DETECTED is to set CPU_COUNT to 1.
#
# LICENSE
#
-# Copyright (c) 2014 Karlson2k (Evgeny Grin) <address@hidden>
+# Copyright (c) 2014,2016 Karlson2k (Evgeny Grin) <address@hidden>
# Copyright (c) 2012 Brian Aker <address@hidden>
# Copyright (c) 2008 Michael Paul Bailey <address@hidden>
# Copyright (c) 2008 Christophe Tournayre <address@hidden>
@@ -25,42 +28,69 @@
# and this notice are preserved. This file is offered as-is, without any
# warranty.
-#serial 10
+#serial 17
- AC_DEFUN([AX_COUNT_CPUS],[
- AC_REQUIRE([AC_CANONICAL_HOST])
- AC_REQUIRE([AC_PROG_EGREP])
+ AC_DEFUN([AX_COUNT_CPUS],[dnl
+ AC_REQUIRE([AC_CANONICAL_HOST])dnl
+ AC_REQUIRE([AC_PROG_EGREP])dnl
AC_MSG_CHECKING([the number of available CPUs])
CPU_COUNT="0"
- AS_CASE([$host_os],[
- *darwin*],[
- AS_IF([test -x /usr/sbin/sysctl],[
- sysctl_a=`/usr/sbin/sysctl -a 2>/dev/null| grep -c hw.cpu`
- AS_IF([test sysctl_a],[
- CPU_COUNT=`/usr/sbin/sysctl -n hw.ncpu`
- ])
- ])],[
- *linux*],[
- AS_IF([test "x$CPU_COUNT" = "x0" -a -e /proc/cpuinfo],[
- AS_IF([test "x$CPU_COUNT" = "x0" -a -e /proc/cpuinfo],[
- CPU_COUNT=`$EGREP -c '^processor' /proc/cpuinfo`
- ])
- ])],[
- *mingw*],[
- AS_IF([test -n "$NUMBER_OF_PROCESSORS"],[
- CPU_COUNT="$NUMBER_OF_PROCESSORS"
- ])],[
- *cygwin*],[
- AS_IF([test -n "$NUMBER_OF_PROCESSORS"],[
- CPU_COUNT="$NUMBER_OF_PROCESSORS"
- ])
- ])
+ # Try generic methods
- AS_IF([test "x$CPU_COUNT" = "x0"],[
- CPU_COUNT="1"
- AC_MSG_RESULT( [unable to detect (assuming 1)] )
- ],[
- AC_MSG_RESULT( $CPU_COUNT )
- ])
- ])
+ # 'getconf' is POSIX utility, '_SC_NPROCESSORS_ONLN' is optional
+ CPU_COUNT=`getconf _NPROCESSORS_ONLN 2>/dev/null | $EGREP -e
'^@<:@0-9@:>@+'` || CPU_COUNT="0"
+ AS_IF([[test "$CPU_COUNT" -gt "0" 2>/dev/null]],[[# empty]],[dnl
+ # 'nproc' is part of GNU Coreutils and is widely available
+ CPU_COUNT=`OMP_NUM_THREADS='' nproc 2>/dev/null` || CPU_COUNT=`nproc
2>/dev/null` || CPU_COUNT="0"
+ ])dnl
+
+ AS_IF([[test "$CPU_COUNT" -gt "0" 2>/dev/null]],[[# empty]],[dnl
+ # Try platform-specific preferred methods
+ AS_CASE([[$host_os]],dnl
+ [[*linux*]],[[CPU_COUNT=`lscpu -p 2>/dev/null | $EGREP -e
'^@<:@0-9@:>@+,' -c` || CPU_COUNT="0"]],dnl
+ [[*darwin*]],[[CPU_COUNT=`sysctl -n hw.logicalcpu 2>/dev/null` ||
CPU_COUNT="0"]],dnl
+ [[freebsd*]],[[CPU_COUNT=`sysctl -n kern.smp.cpus 2>/dev/null` ||
CPU_COUNT="0"]],dnl
+ [[solaris*]],[[CPU_COUNT=`psrinfo 2>/dev/null | $EGREP -e
'^@<:@0-9@:>@.*on-line' -c 2>/dev/null` || CPU_COUNT="0"]],dnl
+ [[mingw*]],[[CPU_COUNT=`ls -qpU1
/proc/registry/HKEY_LOCAL_MACHINE/HARDWARE/DESCRIPTION/System/CentralProcessor/
2>/dev/null | $EGREP -e '^@<:@0-9@:>@+/' -c` || CPU_COUNT="0"]],dnl
+ [[msys*]],[[CPU_COUNT=`ls -qpU1
/proc/registry/HKEY_LOCAL_MACHINE/HARDWARE/DESCRIPTION/System/CentralProcessor/
2>/dev/null | $EGREP -e '^@<:@0-9@:>@+/' -c` || CPU_COUNT="0"]],dnl
+ [[cygwin*]],[[CPU_COUNT=`ls -qpU1
/proc/registry/HKEY_LOCAL_MACHINE/HARDWARE/DESCRIPTION/System/CentralProcessor/
2>/dev/null | $EGREP -e '^@<:@0-9@:>@+/' -c` || CPU_COUNT="0"]]dnl
+ )dnl
+ ])dnl
+
+ AS_IF([[test "$CPU_COUNT" -gt "0" 2>/dev/null]],[[# empty]],[dnl
+ # Try less preferred generic method
+ # 'hw.ncpu' exist on many platforms, but not on GNU/Linux
+ CPU_COUNT=`sysctl -n hw.ncpu 2>/dev/null` || CPU_COUNT="0"
+ ])dnl
+
+ AS_IF([[test "$CPU_COUNT" -gt "0" 2>/dev/null]],[[# empty]],[dnl
+ # Try platform-specific fallback methods
+ # They can be less accurate and slower then preferred methods
+ AS_CASE([[$host_os]],dnl
+ [[*linux*]],[[CPU_COUNT=`$EGREP -e '^processor' -c /proc/cpuinfo
2>/dev/null` || CPU_COUNT="0"]],dnl
+ [[*darwin*]],[[CPU_COUNT=`system_profiler SPHardwareDataType
2>/dev/null | $EGREP -i -e 'number of cores:'|cut -d : -f 2 -s|tr -d ' '` ||
CPU_COUNT="0"]],dnl
+ [[freebsd*]],[[CPU_COUNT=`dmesg 2>/dev/null| $EGREP -e
'^cpu@<:@0-9@:>@+: '|sort -u|$EGREP -e '^' -c` || CPU_COUNT="0"]],dnl
+ [[solaris*]],[[CPU_COUNT=`kstat -m cpu_info -s state -p 2>/dev/null
| $EGREP -c -e 'on-line'` || \
+ CPU_COUNT=`kstat -m cpu_info 2>/dev/null | $EGREP
-c -e 'module: cpu_info'` || CPU_COUNT="0"]],dnl
+ [[mingw*]],[AS_IF([[CPU_COUNT=`reg query
'HKLM\\Hardware\\Description\\System\\CentralProcessor' 2>/dev/null | $EGREP -e
'\\\\@<:@0-9@:>@+$' -c`]],dnl
+ [[# empty]],[[test "$NUMBER_OF_PROCESSORS" -gt "0"
2>/dev/null && CPU_COUNT="$NUMBER_OF_PROCESSORS"]])],dnl
+ [[msys*]],[[test "$NUMBER_OF_PROCESSORS" -gt "0" 2>/dev/null &&
CPU_COUNT="$NUMBER_OF_PROCESSORS"]],dnl
+ [[cygwin*]],[[test "$NUMBER_OF_PROCESSORS" -gt "0" 2>/dev/null &&
CPU_COUNT="$NUMBER_OF_PROCESSORS"]]dnl
+ )dnl
+ ])dnl
+
+ AS_IF([[test "x$CPU_COUNT" != "x0" && test "$CPU_COUNT" -gt 0
2>/dev/null]],[dnl
+ AC_MSG_RESULT([[$CPU_COUNT]])
+ m4_ifvaln([$1],[$1],)dnl
+ ],[dnl
+ m4_ifval([$2],[dnl
+ AS_UNSET([[CPU_COUNT]])
+ AC_MSG_RESULT([[unable to detect]])
+ $2
+ ], [dnl
+ CPU_COUNT="1"
+ AC_MSG_RESULT([[unable to detect (assuming 1)]])
+ ])dnl
+ ])dnl
+ ])dnl
Modified: libmicrohttpd/m4/ax_pthread.m4
===================================================================
--- libmicrohttpd/m4/ax_pthread.m4 2016-04-24 15:16:39 UTC (rev 37072)
+++ libmicrohttpd/m4/ax_pthread.m4 2016-04-24 16:17:53 UTC (rev 37073)
@@ -19,10 +19,10 @@
# is necessary on AIX to use the special cc_r compiler alias.)
#
# NOTE: You are assumed to not only compile your program with these flags,
-# but also link it with them as well. e.g. you should link with
+# but also to link with them as well. For example, you might link with
# $PTHREAD_CC $CFLAGS $PTHREAD_CFLAGS $LDFLAGS ... $PTHREAD_LIBS $LIBS
#
-# If you are only building threads programs, you may wish to use these
+# If you are only building threaded programs, you may wish to use these
# variables in your default LIBS, CFLAGS, and CC:
#
# LIBS="$PTHREAD_LIBS $LIBS"
@@ -30,8 +30,8 @@
# CC="$PTHREAD_CC"
#
# In addition, if the PTHREAD_CREATE_JOINABLE thread-attribute constant
-# has a nonstandard name, defines PTHREAD_CREATE_JOINABLE to that name
-# (e.g. PTHREAD_CREATE_UNDETACHED on AIX).
+# has a nonstandard name, this macro defines PTHREAD_CREATE_JOINABLE to
+# that name (e.g. PTHREAD_CREATE_UNDETACHED on AIX).
#
# Also HAVE_PTHREAD_PRIO_INHERIT is defined if pthread is found and the
# PTHREAD_PRIO_INHERIT symbol is defined when compiling with
@@ -82,35 +82,40 @@
# modified version of the Autoconf Macro, you may extend this special
# exception to the GPL to apply to your modified version as well.
-#serial 21
+#serial 23
AU_ALIAS([ACX_PTHREAD], [AX_PTHREAD])
AC_DEFUN([AX_PTHREAD], [
AC_REQUIRE([AC_CANONICAL_HOST])
+AC_REQUIRE([AC_PROG_CC])
+AC_REQUIRE([AC_PROG_SED])
AC_LANG_PUSH([C])
ax_pthread_ok=no
# We used to check for pthread.h first, but this fails if pthread.h
-# requires special compiler flags (e.g. on True64 or Sequent).
+# requires special compiler flags (e.g. on Tru64 or Sequent).
# It gets checked for in the link test anyway.
# First of all, check if the user has set any of the PTHREAD_LIBS,
# etcetera environment variables, and if threads linking works using
# them:
-if test x"$PTHREAD_LIBS$PTHREAD_CFLAGS" != x; then
- save_CFLAGS="$CFLAGS"
+if test "x$PTHREAD_CFLAGS$PTHREAD_LIBS" != "x"; then
+ ax_pthread_save_CC="$CC"
+ ax_pthread_save_CFLAGS="$CFLAGS"
+ ax_pthread_save_LIBS="$LIBS"
+ AS_IF([test "x$PTHREAD_CC" != "x"], [CC="$PTHREAD_CC"])
CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
- save_LIBS="$LIBS"
LIBS="$PTHREAD_LIBS $LIBS"
- AC_MSG_CHECKING([for pthread_join in LIBS=$PTHREAD_LIBS with
CFLAGS=$PTHREAD_CFLAGS])
- AC_TRY_LINK_FUNC([pthread_join], [ax_pthread_ok=yes])
+ AC_MSG_CHECKING([for pthread_join using $CC $PTHREAD_CFLAGS
$PTHREAD_LIBS])
+ AC_LINK_IFELSE([AC_LANG_CALL([], [pthread_join])], [ax_pthread_ok=yes])
AC_MSG_RESULT([$ax_pthread_ok])
- if test x"$ax_pthread_ok" = xno; then
+ if test "x$ax_pthread_ok" = "xno"; then
PTHREAD_LIBS=""
PTHREAD_CFLAGS=""
fi
- LIBS="$save_LIBS"
- CFLAGS="$save_CFLAGS"
+ CC="$ax_pthread_save_CC"
+ CFLAGS="$ax_pthread_save_CFLAGS"
+ LIBS="$ax_pthread_save_LIBS"
fi
# We must check for the threads library under a number of different
@@ -123,7 +128,7 @@
# which indicates that we try without any flags at all, and "pthread-config"
# which is a program returning the flags for the Pth emulation library.
-ax_pthread_flags="pthreads none -Kthread -kthread lthread -pthread -pthreads
-mthreads pthread --thread-safe -mt pthread-config"
+ax_pthread_flags="pthreads none -Kthread -pthread -pthreads -mthreads pthread
--thread-safe -mt pthread-config"
# The ordering *is* (sometimes) important. Some notes on the
# individual items follow:
@@ -132,82 +137,225 @@
# none: in case threads are in libc; should be tried before -Kthread and
# other compiler flags to prevent continual compiler warnings
# -Kthread: Sequent (threads in libc, but -Kthread needed for pthread.h)
-# -kthread: FreeBSD kernel threads (preferred to -pthread since SMP-able)
-# lthread: LinuxThreads port on FreeBSD (also preferred to -pthread)
-# -pthread: Linux/gcc (kernel threads), BSD/gcc (userland threads)
-# -pthreads: Solaris/gcc
+# -pthread: Linux/gcc (kernel threads), BSD/gcc (userland threads), Tru64
+# (Note: HP C rejects this with "bad form for `-t' option")
+# -pthreads: Solaris/gcc (Note: HP C also rejects)
+# -mt: Sun Workshop C (may only link SunOS threads [-lthread], but it
+# doesn't hurt to check since this sometimes defines pthreads and
+# -D_REENTRANT too), HP C (must be checked before -lpthread, which
+# is present but should not be used directly; and before -mthreads,
+# because the compiler interprets this as "-mt" + "-hreads")
# -mthreads: Mingw32/gcc, Lynx/gcc
-# -mt: Sun Workshop C (may only link SunOS threads [-lthread], but it
-# doesn't hurt to check since this sometimes defines pthreads too;
-# also defines -D_REENTRANT)
-# ... -mt is also the pthreads flag for HP/aCC
# pthread: Linux, etcetera
# --thread-safe: KAI C++
# pthread-config: use pthread-config program (for GNU Pth library)
-case ${host_os} in
+case $host_os in
+
+ freebsd*)
+
+ # -kthread: FreeBSD kernel threads (preferred to -pthread since
SMP-able)
+ # lthread: LinuxThreads port on FreeBSD (also preferred to -pthread)
+
+ ax_pthread_flags="-kthread lthread $ax_pthread_flags"
+ ;;
+
+ hpux*)
+
+ # From the cc(1) man page: "[-mt] Sets various -D flags to enable
+ # multi-threading and also sets -lpthread."
+
+ ax_pthread_flags="-mt -pthread pthread $ax_pthread_flags"
+ ;;
+
+ openedition*)
+
+ # IBM z/OS requires a feature-test macro to be defined in order to
+ # enable POSIX threads at all, so give the user a hint if this is
+ # not set. (We don't define these ourselves, as they can affect
+ # other portions of the system API in unpredictable ways.)
+
+ AC_EGREP_CPP([AX_PTHREAD_ZOS_MISSING],
+ [
+# if !defined(_OPEN_THREADS) && !defined(_UNIX03_THREADS)
+ AX_PTHREAD_ZOS_MISSING
+# endif
+ ],
+ [AC_MSG_WARN([IBM z/OS requires -D_OPEN_THREADS or
-D_UNIX03_THREADS to enable pthreads support.])])
+ ;;
+
solaris*)
# On Solaris (at least, for some versions), libc contains stubbed
# (non-functional) versions of the pthreads routines, so link-based
- # tests will erroneously succeed. (We need to link with -pthreads/-mt/
- # -lpthread.) (The stubs are missing pthread_cleanup_push, or rather
- # a function called by this macro, so we could check for that, but
- # who knows whether they'll stub that too in a future libc.) So,
- # we'll just look for -pthreads and -lpthread first:
+ # tests will erroneously succeed. (N.B.: The stubs are missing
+ # pthread_cleanup_push, or rather a function called by this macro,
+ # so we could check for that, but who knows whether they'll stub
+ # that too in a future libc.) So we'll check first for the
+ # standard Solaris way of linking pthreads (-mt -lpthread).
- ax_pthread_flags="-pthreads pthread -mt -pthread $ax_pthread_flags"
+ ax_pthread_flags="-mt,pthread pthread $ax_pthread_flags"
;;
+esac
- darwin*)
- ax_pthread_flags="-pthread $ax_pthread_flags"
+# GCC generally uses -pthread, or -pthreads on some platforms (e.g. SPARC)
+
+AS_IF([test "x$GCC" = "xyes"],
+ [ax_pthread_flags="-pthread -pthreads $ax_pthread_flags"])
+
+# The presence of a feature test macro requesting re-entrant function
+# definitions is, on some systems, a strong hint that pthreads support is
+# correctly enabled
+
+case $host_os in
+ darwin* | hpux* | linux* | osf* | solaris*)
+ ax_pthread_check_macro="_REENTRANT"
;;
+
+ aix*)
+ ax_pthread_check_macro="_THREAD_SAFE"
+ ;;
+
+ *)
+ ax_pthread_check_macro="--"
+ ;;
esac
+AS_IF([test "x$ax_pthread_check_macro" = "x--"],
+ [ax_pthread_check_cond=0],
+ [ax_pthread_check_cond="!defined($ax_pthread_check_macro)"])
-# Clang doesn't consider unrecognized options an error unless we specify
-# -Werror. We throw in some extra Clang-specific options to ensure that
-# this doesn't happen for GCC, which also accepts -Werror.
+# Are we compiling with Clang?
-AC_MSG_CHECKING([if compiler needs -Werror to reject unknown flags])
-save_CFLAGS="$CFLAGS"
-ax_pthread_extra_flags="-Werror"
-CFLAGS="$CFLAGS $ax_pthread_extra_flags -Wunknown-warning-option
-Wsizeof-array-argument"
-AC_COMPILE_IFELSE([AC_LANG_PROGRAM([int foo(void);],[foo()])],
- [AC_MSG_RESULT([yes])],
- [ax_pthread_extra_flags=
- AC_MSG_RESULT([no])])
-CFLAGS="$save_CFLAGS"
+AC_CACHE_CHECK([whether $CC is Clang],
+ [ax_cv_PTHREAD_CLANG],
+ [ax_cv_PTHREAD_CLANG=no
+ # Note that Autoconf sets GCC=yes for Clang as well as GCC
+ if test "x$GCC" = "xyes"; then
+ AC_EGREP_CPP([AX_PTHREAD_CC_IS_CLANG],
+ [/* Note: Clang 2.7 lacks __clang_[a-z]+__ */
+# if defined(__clang__) && defined(__llvm__)
+ AX_PTHREAD_CC_IS_CLANG
+# endif
+ ],
+ [ax_cv_PTHREAD_CLANG=yes])
+ fi
+ ])
+ax_pthread_clang="$ax_cv_PTHREAD_CLANG"
-if test x"$ax_pthread_ok" = xno; then
-for flag in $ax_pthread_flags; do
+ax_pthread_clang_warning=no
- case $flag in
+# Clang needs special handling, because older versions handle the -pthread
+# option in a rather... idiosyncratic way
+
+if test "x$ax_pthread_clang" = "xyes"; then
+
+ # Clang takes -pthread; it has never supported any other flag
+
+ # (Note 1: This will need to be revisited if a system that Clang
+ # supports has POSIX threads in a separate library. This tends not
+ # to be the way of modern systems, but it's conceivable.)
+
+ # (Note 2: On some systems, notably Darwin, -pthread is not needed
+ # to get POSIX threads support; the API is always present and
+ # active. We could reasonably leave PTHREAD_CFLAGS empty. But
+ # -pthread does define _REENTRANT, and while the Darwin headers
+ # ignore this macro, third-party headers might not.)
+
+ PTHREAD_CFLAGS="-pthread"
+ PTHREAD_LIBS=
+
+ ax_pthread_ok=yes
+
+ # However, older versions of Clang make a point of warning the user
+ # that, in an invocation where only linking and no compilation is
+ # taking place, the -pthread option has no effect ("argument unused
+ # during compilation"). They expect -pthread to be passed in only
+ # when source code is being compiled.
+ #
+ # Problem is, this is at odds with the way Automake and most other
+ # C build frameworks function, which is that the same flags used in
+ # compilation (CFLAGS) are also used in linking. Many systems
+ # supported by AX_PTHREAD require exactly this for POSIX threads
+ # support, and in fact it is often not straightforward to specify a
+ # flag that is used only in the compilation phase and not in
+ # linking. Such a scenario is extremely rare in practice.
+ #
+ # Even though use of the -pthread flag in linking would only print
+ # a warning, this can be a nuisance for well-run software projects
+ # that build with -Werror. So if the active version of Clang has
+ # this misfeature, we search for an option to squash it.
+
+ AC_CACHE_CHECK([whether Clang needs flag to prevent "argument unused"
warning when linking with -pthread],
+ [ax_cv_PTHREAD_CLANG_NO_WARN_FLAG],
+ [ax_cv_PTHREAD_CLANG_NO_WARN_FLAG=unknown
+ # Create an alternate version of $ac_link that compiles and
+ # links in two steps (.c -> .o, .o -> exe) instead of one
+ # (.c -> exe), because the warning occurs only in the second
+ # step
+ ax_pthread_save_ac_link="$ac_link"
+ ax_pthread_sed='s/conftest\.\$ac_ext/conftest.$ac_objext/g'
+ ax_pthread_link_step=`$as_echo "$ac_link" | sed "$ax_pthread_sed"`
+ ax_pthread_2step_ac_link="($ac_compile) && (echo ==== >&5) &&
($ax_pthread_link_step)"
+ ax_pthread_save_CFLAGS="$CFLAGS"
+ for ax_pthread_try in '' -Qunused-arguments
-Wno-unused-command-line-argument unknown; do
+ AS_IF([test "x$ax_pthread_try" = "xunknown"], [break])
+ CFLAGS="-Werror -Wunknown-warning-option $ax_pthread_try
-pthread $ax_pthread_save_CFLAGS"
+ ac_link="$ax_pthread_save_ac_link"
+ AC_LINK_IFELSE([AC_LANG_SOURCE([[int main(void){return 0;}]])],
+ [ac_link="$ax_pthread_2step_ac_link"
+ AC_LINK_IFELSE([AC_LANG_SOURCE([[int main(void){return
0;}]])],
+ [break])
+ ])
+ done
+ ac_link="$ax_pthread_save_ac_link"
+ CFLAGS="$ax_pthread_save_CFLAGS"
+ AS_IF([test "x$ax_pthread_try" = "x"], [ax_pthread_try=no])
+ ax_cv_PTHREAD_CLANG_NO_WARN_FLAG="$ax_pthread_try"
+ ])
+
+ case "$ax_cv_PTHREAD_CLANG_NO_WARN_FLAG" in
+ no | unknown) ;;
+ *) PTHREAD_CFLAGS="$ax_cv_PTHREAD_CLANG_NO_WARN_FLAG
$PTHREAD_CFLAGS" ;;
+ esac
+
+fi # $ax_pthread_clang = yes
+
+if test "x$ax_pthread_ok" = "xno"; then
+for ax_pthread_try_flag in $ax_pthread_flags; do
+
+ case $ax_pthread_try_flag in
none)
AC_MSG_CHECKING([whether pthreads work without any flags])
;;
+ -mt,pthread)
+ AC_MSG_CHECKING([whether pthreads work with -mt -lpthread])
+ PTHREAD_CFLAGS="-mt"
+ PTHREAD_LIBS="-lpthread"
+ ;;
+
-*)
- AC_MSG_CHECKING([whether pthreads work with $flag])
- PTHREAD_CFLAGS="$flag"
+ AC_MSG_CHECKING([whether pthreads work with
$ax_pthread_try_flag])
+ PTHREAD_CFLAGS="$ax_pthread_try_flag"
;;
pthread-config)
AC_CHECK_PROG([ax_pthread_config], [pthread-config], [yes],
[no])
- if test x"$ax_pthread_config" = xno; then continue; fi
+ AS_IF([test "x$ax_pthread_config" = "xno"], [continue])
PTHREAD_CFLAGS="`pthread-config --cflags`"
PTHREAD_LIBS="`pthread-config --ldflags` `pthread-config
--libs`"
;;
*)
- AC_MSG_CHECKING([for the pthreads library -l$flag])
- PTHREAD_LIBS="-l$flag"
+ AC_MSG_CHECKING([for the pthreads library
-l$ax_pthread_try_flag])
+ PTHREAD_LIBS="-l$ax_pthread_try_flag"
;;
esac
- save_LIBS="$LIBS"
- save_CFLAGS="$CFLAGS"
+ ax_pthread_save_CFLAGS="$CFLAGS"
+ ax_pthread_save_LIBS="$LIBS"
+ CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
LIBS="$PTHREAD_LIBS $LIBS"
- CFLAGS="$CFLAGS $PTHREAD_CFLAGS $ax_pthread_extra_flags"
# Check for various functions. We must include pthread.h,
# since some functions may be macros. (On the Sequent, we
@@ -218,7 +366,11 @@
# pthread_cleanup_push because it is one of the few pthread
# functions on Solaris that doesn't have a non-functional libc stub.
# We try pthread_create on general principles.
+
AC_LINK_IFELSE([AC_LANG_PROGRAM([#include <pthread.h>
+# if $ax_pthread_check_cond
+# error "$ax_pthread_check_macro must be defined"
+# endif
static void routine(void *a) { a = 0; }
static void *start_routine(void *a) { return a; }],
[pthread_t th; pthread_attr_t attr;
@@ -227,16 +379,14 @@
pthread_attr_init(&attr);
pthread_cleanup_push(routine, 0);
pthread_cleanup_pop(0) /* ; */])],
- [ax_pthread_ok=yes],
- [])
+ [ax_pthread_ok=yes],
+ [])
- LIBS="$save_LIBS"
- CFLAGS="$save_CFLAGS"
+ CFLAGS="$ax_pthread_save_CFLAGS"
+ LIBS="$ax_pthread_save_LIBS"
AC_MSG_RESULT([$ax_pthread_ok])
- if test "x$ax_pthread_ok" = xyes; then
- break;
- fi
+ AS_IF([test "x$ax_pthread_ok" = "xyes"], [break])
PTHREAD_LIBS=""
PTHREAD_CFLAGS=""
@@ -244,71 +394,74 @@
fi
# Various other checks:
-if test "x$ax_pthread_ok" = xyes; then
- save_LIBS="$LIBS"
+if test "x$ax_pthread_ok" = "xyes"; then
+ ax_pthread_save_CFLAGS="$CFLAGS"
+ ax_pthread_save_LIBS="$LIBS"
+ CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
LIBS="$PTHREAD_LIBS $LIBS"
- save_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
# Detect AIX lossage: JOINABLE attribute is called UNDETACHED.
- AC_MSG_CHECKING([for joinable pthread attribute])
- attr_name=unknown
- for attr in PTHREAD_CREATE_JOINABLE PTHREAD_CREATE_UNDETACHED; do
- AC_LINK_IFELSE([AC_LANG_PROGRAM([#include <pthread.h>],
- [int attr = $attr; return attr /* ; */])],
- [attr_name=$attr; break],
- [])
- done
- AC_MSG_RESULT([$attr_name])
- if test "$attr_name" != PTHREAD_CREATE_JOINABLE; then
- AC_DEFINE_UNQUOTED([PTHREAD_CREATE_JOINABLE], [$attr_name],
- [Define to necessary symbol if this constant
- uses a non-standard name on your system.])
- fi
+ AC_CACHE_CHECK([for joinable pthread attribute],
+ [ax_cv_PTHREAD_JOINABLE_ATTR],
+ [ax_cv_PTHREAD_JOINABLE_ATTR=unknown
+ for ax_pthread_attr in PTHREAD_CREATE_JOINABLE
PTHREAD_CREATE_UNDETACHED; do
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([#include <pthread.h>],
+ [int attr = $ax_pthread_attr;
return attr /* ; */])],
+ [ax_cv_PTHREAD_JOINABLE_ATTR=$ax_pthread_attr;
break],
+ [])
+ done
+ ])
+ AS_IF([test "x$ax_cv_PTHREAD_JOINABLE_ATTR" != "xunknown" && \
+ test "x$ax_cv_PTHREAD_JOINABLE_ATTR" !=
"xPTHREAD_CREATE_JOINABLE" && \
+ test "x$ax_pthread_joinable_attr_defined" != "xyes"],
+ [AC_DEFINE_UNQUOTED([PTHREAD_CREATE_JOINABLE],
+ [$ax_cv_PTHREAD_JOINABLE_ATTR],
+ [Define to necessary symbol if this constant
+ uses a non-standard name on your system.])
+ ax_pthread_joinable_attr_defined=yes
+ ])
- AC_MSG_CHECKING([if more special flags are required for pthreads])
- flag=no
- case ${host_os} in
- aix* | freebsd* | darwin*) flag="-D_THREAD_SAFE";;
- osf* | hpux*) flag="-D_REENTRANT";;
- solaris*)
- if test "$GCC" = "yes"; then
- flag="-D_REENTRANT"
- else
- # TODO: What about Clang on Solaris?
- flag="-mt -D_REENTRANT"
- fi
- ;;
- esac
- AC_MSG_RESULT([$flag])
- if test "x$flag" != xno; then
- PTHREAD_CFLAGS="$flag $PTHREAD_CFLAGS"
- fi
+ AC_CACHE_CHECK([whether more special flags are required for pthreads],
+ [ax_cv_PTHREAD_SPECIAL_FLAGS],
+ [ax_cv_PTHREAD_SPECIAL_FLAGS=no
+ case $host_os in
+ solaris*)
+ ax_cv_PTHREAD_SPECIAL_FLAGS="-D_POSIX_PTHREAD_SEMANTICS"
+ ;;
+ esac
+ ])
+ AS_IF([test "x$ax_cv_PTHREAD_SPECIAL_FLAGS" != "xno" && \
+ test "x$ax_pthread_special_flags_added" != "xyes"],
+ [PTHREAD_CFLAGS="$ax_cv_PTHREAD_SPECIAL_FLAGS $PTHREAD_CFLAGS"
+ ax_pthread_special_flags_added=yes])
AC_CACHE_CHECK([for PTHREAD_PRIO_INHERIT],
- [ax_cv_PTHREAD_PRIO_INHERIT], [
- AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <pthread.h>]],
- [[int i =
PTHREAD_PRIO_INHERIT;]])],
- [ax_cv_PTHREAD_PRIO_INHERIT=yes],
- [ax_cv_PTHREAD_PRIO_INHERIT=no])
+ [ax_cv_PTHREAD_PRIO_INHERIT],
+ [AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <pthread.h>]],
+ [[int i =
PTHREAD_PRIO_INHERIT;]])],
+ [ax_cv_PTHREAD_PRIO_INHERIT=yes],
+ [ax_cv_PTHREAD_PRIO_INHERIT=no])
])
- AS_IF([test "x$ax_cv_PTHREAD_PRIO_INHERIT" = "xyes"],
- [AC_DEFINE([HAVE_PTHREAD_PRIO_INHERIT], [1], [Have
PTHREAD_PRIO_INHERIT.])])
+ AS_IF([test "x$ax_cv_PTHREAD_PRIO_INHERIT" = "xyes" && \
+ test "x$ax_pthread_prio_inherit_defined" != "xyes"],
+ [AC_DEFINE([HAVE_PTHREAD_PRIO_INHERIT], [1], [Have
PTHREAD_PRIO_INHERIT.])
+ ax_pthread_prio_inherit_defined=yes
+ ])
- LIBS="$save_LIBS"
- CFLAGS="$save_CFLAGS"
+ CFLAGS="$ax_pthread_save_CFLAGS"
+ LIBS="$ax_pthread_save_LIBS"
# More AIX lossage: compile with *_r variant
- if test "x$GCC" != xyes; then
+ if test "x$GCC" != "xyes"; then
case $host_os in
aix*)
AS_CASE(["x/$CC"],
-
[x*/c89|x*/c89_128|x*/c99|x*/c99_128|x*/cc|x*/cc128|x*/xlc|x*/xlc_v6|x*/xlc128|x*/xlc128_v6],
- [#handle absolute path differently from PATH based program
lookup
- AS_CASE(["x$CC"],
- [x/*],
-
[AS_IF([AS_EXECUTABLE_P([${CC}_r])],[PTHREAD_CC="${CC}_r"])],
- [AC_CHECK_PROGS([PTHREAD_CC],[${CC}_r],[$CC])])])
+
[x*/c89|x*/c89_128|x*/c99|x*/c99_128|x*/cc|x*/cc128|x*/xlc|x*/xlc_v6|x*/xlc128|x*/xlc128_v6],
+ [#handle absolute path differently from PATH based program
lookup
+ AS_CASE(["x$CC"],
+ [x/*],
+
[AS_IF([AS_EXECUTABLE_P([${CC}_r])],[PTHREAD_CC="${CC}_r"])],
+ [AC_CHECK_PROGS([PTHREAD_CC],[${CC}_r],[$CC])])])
;;
esac
fi
@@ -321,7 +474,7 @@
AC_SUBST([PTHREAD_CC])
# Finally, execute ACTION-IF-FOUND/ACTION-IF-NOT-FOUND:
-if test x"$ax_pthread_ok" = xyes; then
+if test "x$ax_pthread_ok" = "xyes"; then
ifelse([$1],,[AC_DEFINE([HAVE_PTHREAD],[1],[Define if you have POSIX
threads libraries and header files.])],[$1])
:
else
Modified: libmicrohttpd/m4/pkg.m4
===================================================================
--- libmicrohttpd/m4/pkg.m4 2016-04-24 15:16:39 UTC (rev 37072)
+++ libmicrohttpd/m4/pkg.m4 2016-04-24 16:17:53 UTC (rev 37073)
@@ -1,29 +1,60 @@
-# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*-
-# serial 1 (pkg-config-0.24)
-#
-# Copyright © 2004 Scott James Remnant <address@hidden>.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
+dnl pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*-
+dnl serial 11 (pkg-config-0.29.1)
+dnl
+dnl Copyright © 2004 Scott James Remnant <address@hidden>.
+dnl Copyright © 2012-2015 Dan Nicholson <address@hidden>
+dnl
+dnl This program is free software; you can redistribute it and/or modify
+dnl it under the terms of the GNU General Public License as published by
+dnl the Free Software Foundation; either version 2 of the License, or
+dnl (at your option) any later version.
+dnl
+dnl This program is distributed in the hope that it will be useful, but
+dnl WITHOUT ANY WARRANTY; without even the implied warranty of
+dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+dnl General Public License for more details.
+dnl
+dnl You should have received a copy of the GNU General Public License
+dnl along with this program; if not, write to the Free Software
+dnl Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+dnl 02111-1307, USA.
+dnl
+dnl As a special exception to the GNU General Public License, if you
+dnl distribute this file as part of a program that contains a
+dnl configuration script generated by Autoconf, you may include it under
+dnl the same distribution terms that you use for the rest of that
+dnl program.
-# PKG_PROG_PKG_CONFIG([MIN-VERSION])
-# ----------------------------------
+dnl PKG_PREREQ(MIN-VERSION)
+dnl -----------------------
+dnl Since: 0.29
+dnl
+dnl Verify that the version of the pkg-config macros are at least
+dnl MIN-VERSION. Unlike PKG_PROG_PKG_CONFIG, which checks the user's
+dnl installed version of pkg-config, this checks the developer's version
+dnl of pkg.m4 when generating configure.
+dnl
+dnl To ensure that this macro is defined, also add:
+dnl m4_ifndef([PKG_PREREQ],
+dnl [m4_fatal([must install pkg-config 0.29 or later before running
autoconf/autogen])])
+dnl
+dnl See the "Since" comment for each macro you use to see what version
+dnl of the macros you require.
+m4_defun([PKG_PREREQ],
+[m4_define([PKG_MACROS_VERSION], [0.29.1])
+m4_if(m4_version_compare(PKG_MACROS_VERSION, [$1]), -1,
+ [m4_fatal([pkg.m4 version $1 or higher is required but
]PKG_MACROS_VERSION[ found])])
+])dnl PKG_PREREQ
+
+dnl PKG_PROG_PKG_CONFIG([MIN-VERSION])
+dnl ----------------------------------
+dnl Since: 0.16
+dnl
+dnl Search for the pkg-config tool and set the PKG_CONFIG variable to
+dnl first found in the path. Checks that the version of pkg-config found
+dnl is at least MIN-VERSION. If MIN-VERSION is not specified, 0.9.0 is
+dnl used since that's the first version where most current features of
+dnl pkg-config existed.
AC_DEFUN([PKG_PROG_PKG_CONFIG],
[m4_pattern_forbid([^_?PKG_[A-Z_]+$])
m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$])
@@ -45,18 +76,19 @@
PKG_CONFIG=""
fi
fi[]dnl
-])# PKG_PROG_PKG_CONFIG
+])dnl PKG_PROG_PKG_CONFIG
-# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
-#
-# Check to see whether a particular set of modules exists. Similar
-# to PKG_CHECK_MODULES(), but does not set variables or print errors.
-#
-# Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG])
-# only at the first occurence in configure.ac, so if the first place
-# it's called might be skipped (such as if it is within an "if", you
-# have to call PKG_CHECK_EXISTS manually
-# --------------------------------------------------------------
+dnl PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
+dnl -------------------------------------------------------------------
+dnl Since: 0.18
+dnl
+dnl Check to see whether a particular set of modules exists. Similar to
+dnl PKG_CHECK_MODULES(), but does not set variables or print errors.
+dnl
+dnl Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG])
+dnl only at the first occurence in configure.ac, so if the first place
+dnl it's called might be skipped (such as if it is within an "if", you
+dnl have to call PKG_CHECK_EXISTS manually
AC_DEFUN([PKG_CHECK_EXISTS],
[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
if test -n "$PKG_CONFIG" && \
@@ -66,8 +98,10 @@
$3])dnl
fi])
-# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])
-# ---------------------------------------------
+dnl _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])
+dnl ---------------------------------------------
+dnl Internal wrapper calling pkg-config via PKG_CONFIG and setting
+dnl pkg_failed based on the result.
m4_define([_PKG_CONFIG],
[if test -n "$$1"; then
pkg_cv_[]$1="$$1"
@@ -79,10 +113,11 @@
else
pkg_failed=untried
fi[]dnl
-])# _PKG_CONFIG
+])dnl _PKG_CONFIG
-# _PKG_SHORT_ERRORS_SUPPORTED
-# -----------------------------
+dnl _PKG_SHORT_ERRORS_SUPPORTED
+dnl ---------------------------
+dnl Internal check to see if pkg-config supports short errors.
AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED],
[AC_REQUIRE([PKG_PROG_PKG_CONFIG])
if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
@@ -90,19 +125,17 @@
else
_pkg_short_errors_supported=no
fi[]dnl
-])# _PKG_SHORT_ERRORS_SUPPORTED
+])dnl _PKG_SHORT_ERRORS_SUPPORTED
-# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
-# [ACTION-IF-NOT-FOUND])
-#
-#
-# Note that if there is a possibility the first call to
-# PKG_CHECK_MODULES might not happen, you should be sure to include an
-# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac
-#
-#
-# --------------------------------------------------------------
+dnl PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
+dnl [ACTION-IF-NOT-FOUND])
+dnl --------------------------------------------------------------
+dnl Since: 0.4.0
+dnl
+dnl Note that if there is a possibility the first call to
+dnl PKG_CHECK_MODULES might not happen, you should be sure to include an
+dnl explicit call to PKG_PROG_PKG_CONFIG in your configure.ac
AC_DEFUN([PKG_CHECK_MODULES],
[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl
@@ -156,16 +189,40 @@
AC_MSG_RESULT([yes])
$3
fi[]dnl
-])# PKG_CHECK_MODULES
+])dnl PKG_CHECK_MODULES
-# PKG_INSTALLDIR(DIRECTORY)
-# -------------------------
-# Substitutes the variable pkgconfigdir as the location where a module
-# should install pkg-config .pc files. By default the directory is
-# $libdir/pkgconfig, but the default can be changed by passing
-# DIRECTORY. The user can override through the --with-pkgconfigdir
-# parameter.
+dnl PKG_CHECK_MODULES_STATIC(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
+dnl [ACTION-IF-NOT-FOUND])
+dnl ---------------------------------------------------------------------
+dnl Since: 0.29
+dnl
+dnl Checks for existence of MODULES and gathers its build flags with
+dnl static libraries enabled. Sets VARIABLE-PREFIX_CFLAGS from --cflags
+dnl and VARIABLE-PREFIX_LIBS from --libs.
+dnl
+dnl Note that if there is a possibility the first call to
+dnl PKG_CHECK_MODULES_STATIC might not happen, you should be sure to
+dnl include an explicit call to PKG_PROG_PKG_CONFIG in your
+dnl configure.ac.
+AC_DEFUN([PKG_CHECK_MODULES_STATIC],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
+_save_PKG_CONFIG=$PKG_CONFIG
+PKG_CONFIG="$PKG_CONFIG --static"
+PKG_CHECK_MODULES($@)
+PKG_CONFIG=$_save_PKG_CONFIG[]dnl
+])dnl PKG_CHECK_MODULES_STATIC
+
+
+dnl PKG_INSTALLDIR([DIRECTORY])
+dnl -------------------------
+dnl Since: 0.27
+dnl
+dnl Substitutes the variable pkgconfigdir as the location where a module
+dnl should install pkg-config .pc files. By default the directory is
+dnl $libdir/pkgconfig, but the default can be changed by passing
+dnl DIRECTORY. The user can override through the --with-pkgconfigdir
+dnl parameter.
AC_DEFUN([PKG_INSTALLDIR],
[m4_pushdef([pkg_default], [m4_default([$1], ['${libdir}/pkgconfig'])])
m4_pushdef([pkg_description],
@@ -176,16 +233,18 @@
AC_SUBST([pkgconfigdir], [$with_pkgconfigdir])
m4_popdef([pkg_default])
m4_popdef([pkg_description])
-]) dnl PKG_INSTALLDIR
+])dnl PKG_INSTALLDIR
-# PKG_NOARCH_INSTALLDIR(DIRECTORY)
-# -------------------------
-# Substitutes the variable noarch_pkgconfigdir as the location where a
-# module should install arch-independent pkg-config .pc files. By
-# default the directory is $datadir/pkgconfig, but the default can be
-# changed by passing DIRECTORY. The user can override through the
-# --with-noarch-pkgconfigdir parameter.
+dnl PKG_NOARCH_INSTALLDIR([DIRECTORY])
+dnl --------------------------------
+dnl Since: 0.27
+dnl
+dnl Substitutes the variable noarch_pkgconfigdir as the location where a
+dnl module should install arch-independent pkg-config .pc files. By
+dnl default the directory is $datadir/pkgconfig, but the default can be
+dnl changed by passing DIRECTORY. The user can override through the
+dnl --with-noarch-pkgconfigdir parameter.
AC_DEFUN([PKG_NOARCH_INSTALLDIR],
[m4_pushdef([pkg_default], [m4_default([$1], ['${datadir}/pkgconfig'])])
m4_pushdef([pkg_description],
@@ -196,13 +255,15 @@
AC_SUBST([noarch_pkgconfigdir], [$with_noarch_pkgconfigdir])
m4_popdef([pkg_default])
m4_popdef([pkg_description])
-]) dnl PKG_NOARCH_INSTALLDIR
+])dnl PKG_NOARCH_INSTALLDIR
-# PKG_CHECK_VAR(VARIABLE, MODULE, CONFIG-VARIABLE,
-# [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
-# -------------------------------------------
-# Retrieves the value of the pkg-config variable for the given module.
+dnl PKG_CHECK_VAR(VARIABLE, MODULE, CONFIG-VARIABLE,
+dnl [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
+dnl -------------------------------------------
+dnl Since: 0.28
+dnl
+dnl Retrieves the value of the pkg-config variable for the given module.
AC_DEFUN([PKG_CHECK_VAR],
[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
AC_ARG_VAR([$1], [value of $3 for $2, overriding pkg-config])dnl
@@ -211,4 +272,4 @@
AS_VAR_COPY([$1], [pkg_cv_][$1])
AS_VAR_IF([$1], [""], [$5], [$4])dnl
-])# PKG_CHECK_VAR
+])dnl PKG_CHECK_VAR
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- [GNUnet-SVN] r37073 - libmicrohttpd/m4,
gnunet <=