[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[GNUnet-SVN] r5785 - in gnunet-gtk: . src/common
|
From: |
gnunet |
|
Subject: |
[GNUnet-SVN] r5785 - in gnunet-gtk: . src/common |
|
Date: |
Sat, 1 Dec 2007 14:12:45 -0700 (MST) |
Author: grothoff
Date: 2007-12-01 14:12:44 -0700 (Sat, 01 Dec 2007)
New Revision: 5785
Modified:
gnunet-gtk/ltmain.sh
gnunet-gtk/src/common/helper.c
Log:
fix
Modified: gnunet-gtk/ltmain.sh
===================================================================
--- gnunet-gtk/ltmain.sh 2007-12-01 21:09:36 UTC (rev 5784)
+++ gnunet-gtk/ltmain.sh 2007-12-01 21:12:44 UTC (rev 5785)
@@ -1,8 +1,8 @@
# ltmain.sh - Provide generalized library-building support services.
# NOTE: Changing this file will not affect anything until you rerun configure.
#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
-# 2007 Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005
+# Free Software Foundation, Inc.
# Originally by Gordon Matzigkeit <address@hidden>, 1996
#
# This program is free software; you can redistribute it and/or modify
@@ -43,22 +43,14 @@
PROGRAM=ltmain.sh
PACKAGE=libtool
-VERSION="1.5.24 Debian 1.5.24-1"
-TIMESTAMP=" (1.1220.2.456 2007/06/24 02:25:32)"
+VERSION="1.5.22 Debian 1.5.22-4"
+TIMESTAMP=" (1.1220.2.365 2005/12/18 22:14:06)"
-# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes.
+if test -n "${ZSH_VERSION+set}" ; then
setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
# Check that we have a working $echo.
if test "X$1" = X--no-reexec; then
@@ -113,14 +105,12 @@
# These must not be set unconditionally because not all systems understand
# e.g. LANG=C (notably SCO).
# We save the old values to restore during execute mode.
-for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
-do
- eval "if test \"\${$lt_var+set}\" = set; then
- save_$lt_var=\$$lt_var
- $lt_var=C
- export $lt_var
- fi"
-done
+if test "${LC_ALL+set}" = set; then
+ save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
+fi
+if test "${LANG+set}" = set; then
+ save_LANG="$LANG"; LANG=C; export LANG
+fi
# Make sure IFS has a sensible default
lt_nl='
@@ -146,8 +136,6 @@
preserve_args=
lo2o="s/\\.lo\$/.${objext}/"
o2lo="s/\\.${objext}\$/.lo/"
-extracted_archives=
-extracted_serial=0
#####################################
# Shell function definitions:
@@ -208,13 +196,7 @@
if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
$EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
win32_nmres=`eval $NM -f posix -A $1 | \
- $SED -n -e '1,100{
- / I /{
- s,.*,import,
- p
- q
- }
- }'`
+ $SED -n -e '1,100{/ I /{s,.*,import,;p;q;};}'`
case $win32_nmres in
import*) win32_libid_type="x86 archive import";;
*) win32_libid_type="x86 archive static";;
@@ -345,17 +327,7 @@
*) my_xabs=`pwd`"/$my_xlib" ;;
esac
my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
- my_xlib_u=$my_xlib
- while :; do
- case " $extracted_archives " in
- *" $my_xlib_u "*)
- extracted_serial=`expr $extracted_serial + 1`
- my_xlib_u=lt$extracted_serial-$my_xlib ;;
- *) break ;;
- esac
- done
- extracted_archives="$extracted_archives $my_xlib_u"
- my_xdir="$my_gentop/$my_xlib_u"
+ my_xdir="$my_gentop/$my_xlib"
$show "${rm}r $my_xdir"
$run ${rm}r "$my_xdir"
@@ -482,12 +454,11 @@
;;
--version)
- echo "\
-$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP
-
-Copyright (C) 2007 Free Software Foundation, Inc.
-This is free software; see the source for copying conditions. There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+ $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
+ $echo
+ $echo "Copyright (C) 2005 Free Software Foundation, Inc."
+ $echo "This is free software; see the source for copying conditions.
There is NO"
+ $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR
PURPOSE."
exit $?
;;
@@ -784,10 +755,9 @@
*.class) xform=class ;;
*.cpp) xform=cpp ;;
*.cxx) xform=cxx ;;
- *.[fF][09]?) xform=[fF][09]. ;;
+ *.f90) xform=f90 ;;
*.for) xform=for ;;
*.java) xform=java ;;
- *.obj) xform=obj ;;
esac
libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
@@ -1168,9 +1138,8 @@
for arg
do
case $arg in
- -all-static | -static | -static-libtool-libs)
- case $arg in
- -all-static)
+ -all-static | -static)
+ if test "X$arg" = "X-all-static"; then
if test "$build_libtool_libs" = yes && test -z "$link_static_flag";
then
$echo "$modename: warning: complete static linking is impossible in
this configuration" 1>&2
fi
@@ -1178,20 +1147,12 @@
dlopen_self=$dlopen_self_static
fi
prefer_static_libs=yes
- ;;
- -static)
+ else
if test -z "$pic_flag" && test -n "$link_static_flag"; then
dlopen_self=$dlopen_self_static
fi
prefer_static_libs=built
- ;;
- -static-libtool-libs)
- if test -z "$pic_flag" && test -n "$link_static_flag"; then
- dlopen_self=$dlopen_self_static
- fi
- prefer_static_libs=yes
- ;;
- esac
+ fi
build_libtool_libs=no
build_old_libs=yes
break
@@ -1639,7 +1600,7 @@
continue
;;
- -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
compiler_flags="$compiler_flags $arg"
compile_command="$compile_command $arg"
finalize_command="$finalize_command $arg"
@@ -1659,11 +1620,10 @@
# -m* pass through architecture-specific compiler args for GCC
# -m*, -t[45]*, -txscale* pass through architecture-specific
# compiler args for GCC
- # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
- # -F/path gives path to uninstalled frameworks, gcc on darwin
+ # -pg pass through profiling flag for GCC
# @file GCC response files
- -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
- -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)
+ -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*|-pg| \
+ -t[45]*|-txscale*|@*)
# Unknown arguments in both finalize_command and compile_command need
# to be aesthetically quoted because they are evaled later.
@@ -1691,9 +1651,9 @@
-no-install)
case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin*)
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
# The PATH hackery in wrapper scripts is required on Windows
- # and Darwin in order for the loader to find any dlls it needs.
+ # in order for the loader to find any dlls it needs.
$echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
$echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
fast_install=no
@@ -1752,7 +1712,7 @@
continue
;;
- -static | -static-libtool-libs)
+ -static)
# The effects of -static are defined in a previous loop.
# We used to do the same as -all-static on platforms that
# didn't have a PIC flag, but the assumption that the effects
@@ -2137,7 +2097,7 @@
lib=
found=no
case $deplib in
-
-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
if test "$linkmode,$pass" = "prog,link"; then
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
@@ -2533,9 +2493,7 @@
if test "$linkmode,$pass" = "prog,link"; then
if test -n "$library_names" &&
- { { test "$prefer_static_libs" = no ||
- test "$prefer_static_libs,$installed" = "built,yes"; } ||
- test -z "$old_library"; }; then
+ { test "$prefer_static_libs" = no || test -z "$old_library"; };
then
# We need to hardcode the library path
if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
# Make sure the rpath contains only unique directories.
@@ -3231,7 +3189,7 @@
# which has an extra 1 added just for fun
#
case $version_type in
- darwin|linux|osf|windows|none)
+ darwin|linux|osf|windows)
current=`expr $number_major + $number_minor`
age="$number_minor"
revision="$number_revision"
@@ -3242,10 +3200,9 @@
age="0"
;;
irix|nonstopux)
- current=`expr $number_major + $number_minor`
+ current=`expr $number_major + $number_minor - 1`
age="$number_minor"
revision="$number_minor"
- lt_irix_increment=no
;;
*)
$echo "$modename: unknown library version type \`$version_type'"
1>&2
@@ -3309,8 +3266,7 @@
versuffix="$major.$age.$revision"
# Darwin ld doesn't like 0 for these options...
minor_current=`expr $current + 1`
- xlcverstring="${wl}-compatibility_version ${wl}$minor_current
${wl}-current_version ${wl}$minor_current.$revision"
- verstring="-compatibility_version $minor_current -current_version
$minor_current.$revision"
+ verstring="${wl}-compatibility_version ${wl}$minor_current
${wl}-current_version ${wl}$minor_current.$revision"
;;
freebsd-aout)
@@ -3324,11 +3280,8 @@
;;
irix | nonstopux)
- if test "X$lt_irix_increment" = "Xno"; then
- major=`expr $current - $age`
- else
- major=`expr $current - $age + 1`
- fi
+ major=`expr $current - $age + 1`
+
case $version_type in
nonstopux) verstring_prefix=nonstopux ;;
*) verstring_prefix=sgi ;;
@@ -3465,11 +3418,11 @@
fi
# Eliminate all temporary directories.
- #for path in $notinst_path; do
- # lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s%
$path % %g"`
- # deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
- # dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s%
-L$path % %g"`
- #done
+ for path in $notinst_path; do
+ lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
+ deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
+ dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path %
%g"`
+ done
if test -n "$xrpath"; then
# If the user specified any rpath flags, then add them.
@@ -3570,12 +3523,13 @@
int main() { return 0; }
EOF
$rm conftest
- if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
+ $LTCC $LTCFLAGS -o conftest conftest.c $deplibs
+ if test "$?" -eq 0 ; then
ldd_output=`ldd conftest`
for i in $deplibs; do
name=`expr $i : '-l\(.*\)'`
# If $name is empty we are operating on a -L argument.
- if test "$name" != "" && test "$name" != "0"; then
+ if test "$name" != "" && test "$name" -ne "0"; then
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ;
then
case " $predeps $postdeps " in
*" $i "*)
@@ -3614,7 +3568,9 @@
# If $name is empty we are operating on a -L argument.
if test "$name" != "" && test "$name" != "0"; then
$rm conftest
- if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
+ $LTCC $LTCFLAGS -o conftest conftest.c $i
+ # Did it work?
+ if test "$?" -eq 0 ; then
ldd_output=`ldd conftest`
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes"
; then
case " $predeps $postdeps " in
@@ -3646,7 +3602,7 @@
droppeddeps=yes
$echo
$echo "*** Warning! Library $i is needed by this library but
I was not able to"
- $echo "*** make it link in! You will probably need to
install it or some"
+ $echo "*** make it link in! You will probably need to
install it or some"
$echo "*** library that it depends on before this library
will be fully"
$echo "*** functional. Installing it before continuing would
be even better."
fi
@@ -3932,10 +3888,7 @@
test -n "$hardcode_libdirs"; then
libdir="$hardcode_libdirs"
if test -n "$hardcode_libdir_flag_spec_ld"; then
- case $archive_cmds in
- *\$LD*) eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" ;;
- *) eval dep_rpath=\"$hardcode_libdir_flag_spec\" ;;
- esac
+ eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
else
eval dep_rpath=\"$hardcode_libdir_flag_spec\"
fi
@@ -4294,14 +4247,12 @@
reload_conv_objs=
gentop=
# reload_cmds runs $LD directly, so let us get rid of
- # -Wl from whole_archive_flag_spec and hope we can get by with
- # turning comma into space..
+ # -Wl from whole_archive_flag_spec
wl=
if test -n "$convenience"; then
if test -n "$whole_archive_flag_spec"; then
- eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
- reload_conv_objs=$reload_objs\ `$echo "X$tmp_whole_archive_flags" |
$Xsed -e 's|,| |g'`
+ eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
else
gentop="$output_objdir/${obj}x"
generated="$generated $gentop"
@@ -4749,16 +4700,16 @@
case $host in
*cygwin* | *mingw* )
if test -f "$output_objdir/${outputname}.def" ; then
- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e
"address@hidden@%$output_objdir/${outputname}.def
$output_objdir/${outputname}S.${objext}%" | $NL2SP`
- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e
"address@hidden@%$output_objdir/${outputname}.def
$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+ compile_command=`$echo "X$compile_command" | $Xsed -e
"address@hidden@%$output_objdir/${outputname}.def
$output_objdir/${outputname}S.${objext}%"`
+ finalize_command=`$echo "X$finalize_command" | $Xsed -e
"address@hidden@%$output_objdir/${outputname}.def
$output_objdir/${outputname}S.${objext}%"`
else
- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e
"address@hidden@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e
"address@hidden@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+ compile_command=`$echo "X$compile_command" | $Xsed -e
"address@hidden@%$output_objdir/${outputname}S.${objext}%"`
+ finalize_command=`$echo "X$finalize_command" | $Xsed -e
"address@hidden@%$output_objdir/${outputname}S.${objext}%"`
fi
;;
* )
- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e
"address@hidden@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e
"address@hidden@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+ compile_command=`$echo "X$compile_command" | $Xsed -e
"address@hidden@%$output_objdir/${outputname}S.${objext}%"`
+ finalize_command=`$echo "X$finalize_command" | $Xsed -e
"address@hidden@%$output_objdir/${outputname}S.${objext}%"`
;;
esac
;;
@@ -4773,13 +4724,13 @@
# really was required.
# Nullify the symbol file.
- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%
@address@hidden" | $NL2SP`
- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%
@address@hidden" | $NL2SP`
+ compile_command=`$echo "X$compile_command" | $Xsed -e "s%
@address@hidden"`
+ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%
@address@hidden"`
fi
if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
# Replace the output file specification.
- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e
'address@hidden@%'"$output"'%g' | $NL2SP`
+ compile_command=`$echo "X$compile_command" | $Xsed -e
'address@hidden@%'"$output"'%g'`
link_command="$compile_command$compile_rpath"
# We have no uninstalled library dependencies, so finalize right now.
@@ -4866,7 +4817,7 @@
if test "$fast_install" != no; then
link_command="$finalize_var$compile_command$finalize_rpath"
if test "$fast_install" = yes; then
- relink_command=`$echo "X$compile_var$compile_command$compile_rpath"
| $SP2NL | $Xsed -e 'address@hidden@%\$progdir/\$file%g' | $NL2SP`
+ relink_command=`$echo "X$compile_var$compile_command$compile_rpath"
| $Xsed -e 'address@hidden@%\$progdir/\$file%g'`
else
# fast_install is set to needless
relink_command=
@@ -4903,7 +4854,7 @@
fi
done
relink_command="(cd `pwd`; $relink_command)"
- relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e
"$sed_quote_subst" | $NL2SP`
+ relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
fi
# Quote $echo for shipping.
@@ -5310,20 +5261,6 @@
Xsed='${SED} -e 1s/^X//'
sed_quote_subst='$sed_quote_subst'
-# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
-if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on \${1+\"address@hidden"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '\${1+\"address@hidden"}'='\"address@hidden"'
- setopt NO_GLOB_SUBST
-else
- case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
@@ -5466,7 +5403,7 @@
;;
esac
$echo >> $output "\
- \$echo \"\$0: cannot exec \$program \$*\"
+ \$echo \"\$0: cannot exec \$program \${1+\"address@hidden"}\"
exit $EXIT_FAILURE
fi
else
@@ -5652,7 +5589,7 @@
done
# Quote the link command for shipping.
relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink
$libtool_args @inst_prefix_dir@)"
- relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e
"$sed_quote_subst" | $NL2SP`
+ relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
if test "$hardcode_automatic" = yes ; then
relink_command=
fi
@@ -5997,9 +5934,9 @@
if test -n "$inst_prefix_dir"; then
# Stick the inst_prefix_dir data into the link command.
- relink_command=`$echo "$relink_command" | $SP2NL | $SED
"address@hidden@%-inst-prefix-dir $inst_prefix_dir%" | $NL2SP`
+ relink_command=`$echo "$relink_command" | $SED
"address@hidden@%-inst-prefix-dir $inst_prefix_dir%"`
else
- relink_command=`$echo "$relink_command" | $SP2NL | $SED
"address@hidden@%%" | $NL2SP`
+ relink_command=`$echo "$relink_command" | $SED "address@hidden@%%"`
fi
$echo "$modename: warning: relinking \`$file'" 1>&2
@@ -6208,7 +6145,7 @@
file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
outputname="$tmpdir/$file"
# Replace the output file specification.
- relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e
'address@hidden@%'"$outputname"'%g' | $NL2SP`
+ relink_command=`$echo "X$relink_command" | $Xsed -e
'address@hidden@%'"$outputname"'%g'`
$show "$relink_command"
if $run eval "$relink_command"; then :
@@ -6419,10 +6356,8 @@
if test -f "$dir/$objdir/$dlname"; then
dir="$dir/$objdir"
else
- if test ! -f "$dir/$dlname"; then
- $echo "$modename: cannot find \`$dlname' in \`$dir' or
\`$dir/$objdir'" 1>&2
- exit $EXIT_FAILURE
- fi
+ $echo "$modename: cannot find \`$dlname' in \`$dir' or
\`$dir/$objdir'" 1>&2
+ exit $EXIT_FAILURE
fi
;;
@@ -6486,12 +6421,12 @@
fi
# Restore saved environment variables
- for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
- do
- eval "if test \"\${save_$lt_var+set}\" = set; then
- $lt_var=\$save_$lt_var; export $lt_var
- fi"
- done
+ if test "${save_LC_ALL+set}" = set; then
+ LC_ALL="$save_LC_ALL"; export LC_ALL
+ fi
+ if test "${save_LANG+set}" = set; then
+ LANG="$save_LANG"; export LANG
+ fi
# Now prepare to actually exec the command.
exec_cmd="\$cmd$args"
@@ -6848,9 +6783,9 @@
-dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
-export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
-export-symbols SYMFILE
- try to export only the symbols listed in SYMFILE
+ try to export only the symbols listed in SYMFILE
-export-symbols-regex REGEX
- try to export only the symbols matching REGEX
+ try to export only the symbols matching REGEX
-LLIBDIR search LIBDIR for required installed libraries
-lNAME OUTPUT-FILE requires the installed library libNAME
-module build a library that can dlopened
@@ -6864,11 +6799,9 @@
-release RELEASE specify package release information
-rpath LIBDIR the created library will eventually be installed in LIBDIR
-R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
- -static do not do any dynamic linking of uninstalled libtool
libraries
- -static-libtool-libs
- do not do any dynamic linking of libtool libraries
+ -static do not do any dynamic linking of libtool libraries
-version-info CURRENT[:REVISION[:AGE]]
- specify library version info [each variable defaults to 0]
+ specify library version info [each variable defaults to 0]
All other options (arguments beginning with \`-') are ignored.
Modified: gnunet-gtk/src/common/helper.c
===================================================================
--- gnunet-gtk/src/common/helper.c 2007-12-01 21:09:36 UTC (rev 5784)
+++ gnunet-gtk/src/common/helper.c 2007-12-01 21:12:44 UTC (rev 5785)
@@ -334,7 +334,7 @@
#endif
GNUNET_free (filename);
- mainXML = glade_xml_new (gladeFile, "mainWindow", PACKAGNUNET_GE_NAME);
+ mainXML = glade_xml_new (gladeFile, "mainWindow", PACKAGE_NAME);
if (mainXML == NULL)
GNUNET_GE_DIE_STRERROR_FILE (ectx,
GNUNET_GE_FATAL | GNUNET_GE_USER |
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- [GNUnet-SVN] r5785 - in gnunet-gtk: . src/common,
gnunet <=