[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[GNUnet-SVN] r5679 - in GNUnet: . libltdl m4
From: |
gnunet |
Subject: |
[GNUnet-SVN] r5679 - in GNUnet: . libltdl m4 |
Date: |
Sat, 29 Sep 2007 22:13:55 -0600 (MDT) |
Author: grothoff
Date: 2007-09-29 22:13:53 -0600 (Sat, 29 Sep 2007)
New Revision: 5679
Modified:
GNUnet/INSTALL
GNUnet/libltdl/aclocal.m4
GNUnet/libltdl/configure
GNUnet/libltdl/install-sh
GNUnet/libltdl/ltmain.sh
GNUnet/libltdl/missing
GNUnet/m4/Makefile.in
Log:
ltdlcrap
Modified: GNUnet/INSTALL
===================================================================
--- GNUnet/INSTALL 2007-09-30 03:31:18 UTC (rev 5678)
+++ GNUnet/INSTALL 2007-09-30 04:13:53 UTC (rev 5679)
@@ -1,13 +1,19 @@
-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software
-Foundation, Inc.
+Installation Instructions
+*************************
- This file is free documentation; the Free Software Foundation gives
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
+2006 Free Software Foundation, Inc.
+
+This file is free documentation; the Free Software Foundation gives
unlimited permission to copy, distribute and modify it.
Basic Installation
==================
- These are generic installation instructions.
+Briefly, the shell commands `./configure; make; make install' should
+configure, build, and install this package. The following
+more-detailed instructions are generic; see the `README' file for
+instructions specific to this package.
The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
@@ -20,9 +26,9 @@
It can also use an optional file (typically called `config.cache'
and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring. (Caching is
+the results of its tests to speed up reconfiguring. Caching is
disabled by default to prevent problems with accidental use of stale
-cache files.)
+cache files.
If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
@@ -32,20 +38,17 @@
may remove or edit it.
The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'. You only need
-`configure.ac' if you want to change it or regenerate `configure' using
-a newer version of `autoconf'.
+`configure' by a program called `autoconf'. You need `configure.ac' if
+you want to change it or regenerate `configure' using a newer version
+of `autoconf'.
The simplest way to compile this package is:
1. `cd' to the directory containing the package's source code and type
- `./configure' to configure the package for your system. If you're
- using `csh' on an old version of System V, you might need to type
- `sh ./configure' instead to prevent `csh' from trying to execute
- `configure' itself.
+ `./configure' to configure the package for your system.
- Running `configure' takes awhile. While running, it prints some
- messages telling which features it is checking for.
+ Running `configure' might take a while. While running, it prints
+ some messages telling which features it is checking for.
2. Type `make' to compile the package.
@@ -67,51 +70,49 @@
Compilers and Options
=====================
- Some systems require unusual options for compilation or linking that
-the `configure' script does not know about. Run `./configure --help'
-for details on some of the pertinent environment variables.
+Some systems require unusual options for compilation or linking that the
+`configure' script does not know about. Run `./configure --help' for
+details on some of the pertinent environment variables.
You can give `configure' initial values for configuration parameters
by setting variables in the command line or in the environment. Here
is an example:
- ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
+ ./configure CC=c99 CFLAGS=-g LIBS=-lposix
*Note Defining Variables::, for more details.
Compiling For Multiple Architectures
====================================
- You can compile the package for more than one kind of computer at the
+You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
-own directory. To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'. `cd' to the
+own directory. To do this, you can use GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'.
- If you have to use a `make' that does not support the `VPATH'
-variable, you have to compile the package for one architecture at a
-time in the source code directory. After you have installed the
-package for one architecture, use `make distclean' before reconfiguring
-for another architecture.
+ With a non-GNU `make', it is safer to compile the package for one
+architecture at a time in the source code directory. After you have
+installed the package for one architecture, use `make distclean' before
+reconfiguring for another architecture.
Installation Names
==================
- By default, `make install' will install the package's files in
-`/usr/local/bin', `/usr/local/man', etc. You can specify an
-installation prefix other than `/usr/local' by giving `configure' the
-option `--prefix=PATH'.
+By default, `make install' installs the package's commands under
+`/usr/local/bin', include files under `/usr/local/include', etc. You
+can specify an installation prefix other than `/usr/local' by giving
+`configure' the option `--prefix=PREFIX'.
You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
-give `configure' the option `--exec-prefix=PATH', the package will use
-PATH as the prefix for installing programs and libraries.
-Documentation and other data files will still use the regular prefix.
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files still use the regular prefix.
In addition, if you use an unusual directory layout you can give
-options like `--bindir=PATH' to specify different values for particular
+options like `--bindir=DIR' to specify different values for particular
kinds of files. Run `configure --help' for a list of the directories
you can set and what kinds of files go in them.
@@ -122,7 +123,7 @@
Optional Features
=================
- Some packages pay attention to `--enable-FEATURE' options to
+Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
is something like `gnu-as' or `x' (for the X Window System). The
@@ -137,11 +138,11 @@
Specifying the System Type
==========================
- There may be some features `configure' cannot figure out
-automatically, but needs to determine by the type of machine the package
-will run on. Usually, assuming the package is built to be run on the
-_same_ architectures, `configure' can figure that out, but if it prints
-a message saying it cannot guess the machine type, give it the
+There may be some features `configure' cannot figure out automatically,
+but needs to determine by the type of machine the package will run on.
+Usually, assuming the package is built to be run on the _same_
+architectures, `configure' can figure that out, but if it prints a
+message saying it cannot guess the machine type, give it the
`--build=TYPE' option. TYPE can either be a short name for the system
type, such as `sun4', or a canonical name which has the form:
@@ -156,7 +157,7 @@
need to know the machine type.
If you are _building_ compiler tools for cross-compiling, you should
-use the `--target=TYPE' option to select the type of system they will
+use the option `--target=TYPE' to select the type of system they will
produce code for.
If you want to _use_ a cross compiler, that generates code for a
@@ -167,9 +168,9 @@
Sharing Defaults
================
- If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
+If you want to set default values for `configure' scripts to share, you
+can create a site shell script called `config.site' that gives default
+values for variables like `CC', `cache_file', and `prefix'.
`configure' looks for `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists. Or, you can set the
`CONFIG_SITE' environment variable to the location of the site script.
@@ -178,7 +179,7 @@
Defining Variables
==================
- Variables not defined in a site shell script can be set in the
+Variables not defined in a site shell script can be set in the
environment passed to `configure'. However, some packages may run
configure again during the build, and the customized values of these
variables may be lost. In order to avoid this problem, you should set
@@ -186,14 +187,18 @@
./configure CC=/usr/local2/bin/gcc
-will cause the specified gcc to be used as the C compiler (unless it is
+causes the specified `gcc' to be used as the C compiler (unless it is
overridden in the site shell script).
+Unfortunately, this technique does not work for `CONFIG_SHELL' due to
+an Autoconf bug. Until the bug is fixed you can use this workaround:
+
+ CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
+
`configure' Invocation
======================
- `configure' recognizes the following options to control how it
-operates.
+`configure' recognizes the following options to control how it operates.
`--help'
`-h'
Modified: GNUnet/libltdl/aclocal.m4
===================================================================
--- GNUnet/libltdl/aclocal.m4 2007-09-30 03:31:18 UTC (rev 5678)
+++ GNUnet/libltdl/aclocal.m4 2007-09-30 04:13:53 UTC (rev 5679)
@@ -1,7 +1,7 @@
-# generated automatically by aclocal 1.8.5 -*- Autoconf -*-
+# generated automatically by aclocal 1.10 -*- Autoconf -*-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
-# Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006 Free Software Foundation, Inc.
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -11,56 +11,53 @@
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
-# -*- Autoconf -*-
-# Copyright (C) 2002, 2003 Free Software Foundation, Inc.
-# Generated from amversion.in; do not edit by hand.
+m4_if(m4_PACKAGE_VERSION, [2.61],,
+[m4_fatal([this file was generated for autoconf 2.61.
+You have another version of autoconf. If you want to use that,
+you should regenerate the build system entirely.], [63])])
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
+# Copyright (C) 2002, 2003, 2005, 2006 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-
# AM_AUTOMAKE_VERSION(VERSION)
# ----------------------------
# Automake X.Y traces this macro to ensure aclocal.m4 has been
# generated from the m4 files accompanying Automake X.Y.
-AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.8"])
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.10'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version. Point them to the right macro.
+m4_if([$1], [1.10], [],
+ [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too. Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
+
# AM_SET_CURRENT_AUTOMAKE_VERSION
# -------------------------------
-# Call AM_AUTOMAKE_VERSION so it can be traced.
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
- [AM_AUTOMAKE_VERSION([1.8.5])])
+[AM_AUTOMAKE_VERSION([1.10])dnl
+_AM_AUTOCONF_VERSION(m4_PACKAGE_VERSION)])
-# AM_AUX_DIR_EXPAND
+# AM_AUX_DIR_EXPAND -*- Autoconf -*-
-# Copyright (C) 2001, 2003 Free Software Foundation, Inc.
+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
@@ -106,27 +103,17 @@
am_aux_dir=`cd $ac_aux_dir && pwd`
])
-# AM_CONDITIONAL -*- Autoconf -*-
+# AM_CONDITIONAL -*- Autoconf -*-
-# Copyright (C) 1997, 2000, 2001, 2003 Free Software Foundation, Inc.
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
+# serial 8
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 6
-
# AM_CONDITIONAL(NAME, SHELL-CONDITION)
# -------------------------------------
# Define a conditional.
@@ -134,8 +121,10 @@
[AC_PREREQ(2.52)dnl
ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])
-AC_SUBST([$1_FALSE])
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
if $2; then
$1_TRUE=
$1_FALSE='#'
@@ -145,31 +134,19 @@
fi
AC_CONFIG_COMMANDS_PRE(
[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
- AC_MSG_ERROR([conditional "$1" was never defined.
-Usually this means the macro was only invoked conditionally.])
+ AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
fi])])
-# serial 7 -*- Autoconf -*-
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
+# serial 9
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-
# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
# written in clear, in which case automake, when reading aclocal.m4,
# will think it sees a *use*, and therefore will trigger all it's
@@ -177,7 +154,6 @@
# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
-
# _AM_DEPENDENCIES(NAME)
# ----------------------
# See how the compiler implements dependency checking.
@@ -197,6 +173,7 @@
ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
[$1], CXX, [depcc="$CXX" am_compiler_list=],
[$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+ [$1], UPC, [depcc="$UPC" am_compiler_list=],
[$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
[depcc="$$1" am_compiler_list=])
@@ -262,6 +239,7 @@
depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
$SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
>/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
${MAKE-make} -s -f confmf > /dev/null 2>&1; then
@@ -314,30 +292,21 @@
AMDEPBACKSLASH='\'
fi
AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
])
-# Generate code to set up dependency tracking. -*- Autoconf -*-
+# Generate code to set up dependency tracking. -*- Autoconf -*-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation,
Inc.
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
+#serial 3
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-#serial 2
-
# _AM_OUTPUT_DEPENDENCY_COMMANDS
# ------------------------------
AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
@@ -349,33 +318,28 @@
# some people rename them; so instead we look at the file content.
# Grep'ing the first line is not enough: some people post-process
# each Makefile.in and add a new line on top of each file to say so.
- # So let's grep whole file.
- if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed 10q "$mf" | grep '^#.*generated by automake' > /dev/null 2>&1; then
dirpart=`AS_DIRNAME("$mf")`
else
continue
fi
- grep '^DEP_FILES *= *[[^ @%:@]]' < "$mf" > /dev/null || continue
- # Extract the definition of DEP_FILES from the Makefile without
- # running `make'.
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running `make'.
DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
# When using ansi2knr, U may be empty or an underscore; expand it
U=`sed -n 's/^U = //p' < "$mf"`
- test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
- # We invoke sed twice because it is the simplest approach to
- # changing $(DEPDIR) to its actual value in the expansion.
- for file in `sed -n '
- /^DEP_FILES = .*\\\\$/ {
- s/^DEP_FILES = //
- :loop
- s/\\\\$//
- p
- n
- /\\\\$/ b loop
- p
- }
- /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
# Make sure the directory exists.
test -f "$dirpart/$file" && continue
@@ -401,55 +365,32 @@
[AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
])
-# Like AC_CONFIG_HEADER, but automatically create stamp file. -*- Autoconf -*-
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
-# Copyright (C) 1996, 1997, 2000, 2001, 2003 Free Software Foundation, Inc.
+# serial 8
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 7
-
# AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS.
AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)])
-# Do all the work for Automake. -*- Autoconf -*-
+# Do all the work for Automake. -*- Autoconf -*-
-# This macro actually does too much some checks are only needed if
-# your package does certain things. But this isn't really a big deal.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
-# Free Software Foundation, Inc.
+# serial 12
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
+# This macro actually does too much. Some checks are only needed if
+# your package does certain things. But this isn't really a big deal.
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 11
-
# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
# AM_INIT_AUTOMAKE([OPTIONS])
# -----------------------------------------------
@@ -462,16 +403,20 @@
# arguments mandatory, and then we can depend on a new Autoconf
# release and drop the old call support.
AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.58])dnl
+[AC_PREREQ([2.60])dnl
dnl Autoconf wants to disallow AM_ names. We explicitly allow
dnl the ones we care about.
m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
AC_REQUIRE([AC_PROG_INSTALL])dnl
-# test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" &&
- test -f $srcdir/config.status; then
- AC_MSG_ERROR([source directory already configured; run "make distclean"
there first])
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+ # is not polluted with repeated "-I."
+ AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+ AC_MSG_ERROR([source directory already configured; run "make distclean"
there first])
+ fi
fi
# test whether we have cygpath
@@ -491,6 +436,9 @@
AC_SUBST([PACKAGE], [$1])dnl
AC_SUBST([VERSION], [$2])],
[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
+ [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
@@ -506,7 +454,6 @@
AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
AM_MISSING_PROG(AUTOHEADER, autoheader)
AM_MISSING_PROG(MAKEINFO, makeinfo)
-AM_MISSING_PROG(AMTAR, tar)
AM_PROG_INSTALL_SH
AM_PROG_INSTALL_STRIP
AC_REQUIRE([AM_PROG_MKDIR_P])dnl
@@ -515,7 +462,9 @@
AC_REQUIRE([AC_PROG_AWK])dnl
AC_REQUIRE([AC_PROG_MAKE_SET])dnl
AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+ [_AM_PROG_TAR([v7])])])
_AM_IF_OPTION([no-dependencies],,
[AC_PROVIDE_IFELSE([AC_PROG_CC],
[_AM_DEPENDENCIES(CC)],
@@ -525,6 +474,10 @@
[_AM_DEPENDENCIES(CXX)],
[define([AC_PROG_CXX],
defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+ [_AM_DEPENDENCIES(OBJC)],
+ [define([AC_PROG_OBJC],
+ defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
])
])
@@ -549,52 +502,28 @@
done
echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
# AM_PROG_INSTALL_SH
# ------------------
# Define $install_sh.
-
-# Copyright (C) 2001, 2003 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
AC_DEFUN([AM_PROG_INSTALL_SH],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-install_sh=${install_sh-"$am_aux_dir/install-sh"}
+install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
AC_SUBST(install_sh)])
-# -*- Autoconf -*-
-# Copyright (C) 2003 Free Software Foundation, Inc.
+# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
+# serial 2
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 1
-
# Check whether the underlying file-system supports filenames
# with a leading dot. For instance MS-DOS doesn't.
AC_DEFUN([AM_SET_LEADING_DOT],
@@ -608,27 +537,16 @@
rmdir .tst 2>/dev/null
AC_SUBST([am__leading_dot])])
-# Check to see how 'make' treats includes. -*- Autoconf -*-
+# Check to see how 'make' treats includes. -*- Autoconf -*-
-# Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc.
+# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
+# serial 3
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 2
-
# AM_MAKE_INCLUDE()
# -----------------
# Check to see how make treats includes.
@@ -671,28 +589,17 @@
rm -f confinc confmf
])
-# -*- Autoconf -*-
+# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
-# Copyright (C) 1997, 1999, 2000, 2001, 2003 Free Software Foundation, Inc.
+# serial 5
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 3
-
# AM_MISSING_PROG(NAME, PROGRAM)
# ------------------------------
AC_DEFUN([AM_MISSING_PROG],
@@ -707,6 +614,7 @@
# If it does, set am_missing_run to use it, otherwise, to nothing.
AC_DEFUN([AM_MISSING_HAS_RUN],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
# Use eval to expand $SHELL
if eval "$MISSING --run true"; then
@@ -717,93 +625,42 @@
fi
])
+# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
# AM_PROG_MKDIR_P
# ---------------
-# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise.
+# Check for `mkdir -p'.
+AC_DEFUN([AM_PROG_MKDIR_P],
+[AC_PREREQ([2.60])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P,
+dnl while keeping a definition of mkdir_p for backward compatibility.
+dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
+dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
+dnl Makefile.ins that do not define MKDIR_P, so we do our own
+dnl adjustment using top_builddir (which is defined more often than
+dnl MKDIR_P).
+AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
+case $mkdir_p in
+ [[\\/$]]* | ?:[[\\/]]*) ;;
+ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+])
-# Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+# Helper functions for option handling. -*- Autoconf -*-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
-# created by `make install' are always world readable, even if the
-# installer happens to have an overly restrictive umask (e.g. 077).
-# This was a mistake. There are at least two reasons why we must not
-# use `-m 0755':
-# - it causes special bits like SGID to be ignored,
-# - it may be too restrictive (some setups expect 775 directories).
+# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
#
-# Do not use -m 0755 and let people choose whatever they expect by
-# setting umask.
-#
-# We cannot accept any implementation of `mkdir' that recognizes `-p'.
-# Some implementations (such as Solaris 8's) are not thread-safe: if a
-# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c'
-# concurrently, both version can detect that a/ is missing, but only
-# one can create it and the other will error out. Consequently we
-# restrict ourselves to GNU make (using the --version option ensures
-# this.)
-AC_DEFUN([AM_PROG_MKDIR_P],
-[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
- # Keeping the `.' argument allows $(mkdir_p) to be used without
- # argument. Indeed, we sometimes output rules like
- # $(mkdir_p) $(somedir)
- # where $(somedir) is conditionally defined.
- # (`test -n '$(somedir)' && $(mkdir_p) $(somedir)' is a more
- # expensive solution, as it forces Make to start a sub-shell.)
- mkdir_p='mkdir -p -- .'
-else
- # On NextStep and OpenStep, the `mkdir' command does not
- # recognize any option. It will interpret all options as
- # directories to create, and then abort because `.' already
- # exists.
- for d in ./-p ./--version;
- do
- test -d $d && rmdir $d
- done
- # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
- if test -f "$ac_aux_dir/mkinstalldirs"; then
- mkdir_p='$(mkinstalldirs)'
- else
- mkdir_p='$(install_sh) -d'
- fi
-fi
-AC_SUBST([mkdir_p])])
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
-# Helper functions for option handling. -*- Autoconf -*-
+# serial 3
-# Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 2
-
# _AM_MANGLE_OPTION(NAME)
# -----------------------
AC_DEFUN([_AM_MANGLE_OPTION],
@@ -827,29 +684,17 @@
AC_DEFUN([_AM_IF_OPTION],
[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+# Check to make sure that the build environment is sane. -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
+# Free Software Foundation, Inc.
#
-# Check to make sure that the build environment is sane.
-#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
-# Copyright (C) 1996, 1997, 2000, 2001, 2003 Free Software Foundation, Inc.
+# serial 4
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 3
-
# AM_SANITY_CHECK
# ---------------
AC_DEFUN([AM_SANITY_CHECK],
@@ -891,25 +736,14 @@
fi
AC_MSG_RESULT(yes)])
-# AM_PROG_INSTALL_STRIP
+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
-# Copyright (C) 2001, 2003 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
+# AM_PROG_INSTALL_STRIP
+# ---------------------
# One issue with vendor `install' (even GNU) is that you can't
# specify the program used to strip binaries. This is especially
# annoying in cross-compiling environments, where the build's strip
@@ -927,7 +761,115 @@
if test "$cross_compiling" != no; then
AC_CHECK_TOOL([STRIP], [strip], :)
fi
-INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
AC_SUBST([INSTALL_STRIP_PROGRAM])])
+# Copyright (C) 2006 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputing VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# Check how to create a tarball. -*- Autoconf -*-
+
+# Copyright (C) 2004, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of `v7', `ustar', or `pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+# tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+# $(am__untar) < result.tar
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.
+AM_MISSING_PROG([AMTAR], [tar])
+m4_if([$1], [v7],
+ [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
+ [m4_case([$1], [ustar],, [pax],,
+ [m4_fatal([Unknown tar format])])
+AC_MSG_CHECKING([how to create a $1 tar archive])
+# Loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+_am_tools=${am_cv_prog_tar_$1-$_am_tools}
+# Do not fold the above two line into one, because Tru64 sh and
+# Solaris sh will not grok spaces in the rhs of `-'.
+for _am_tool in $_am_tools
+do
+ case $_am_tool in
+ gnutar)
+ for _am_tar in tar gnutar gtar;
+ do
+ AM_RUN_LOG([$_am_tar --version]) && break
+ done
+ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf -
"'"$$tardir"'
+ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf -
"'"$tardir"'
+ am__untar="$_am_tar -xf -"
+ ;;
+ plaintar)
+ # Must skip GNU tar: if it does not support --format= it doesn't create
+ # ustar tarball either.
+ (tar --version) >/dev/null 2>&1 && continue
+ am__tar='tar chf - "$$tardir"'
+ am__tar_='tar chf - "$tardir"'
+ am__untar='tar xf -'
+ ;;
+ pax)
+ am__tar='pax -L -x $1 -w "$$tardir"'
+ am__tar_='pax -L -x $1 -w "$tardir"'
+ am__untar='pax -r'
+ ;;
+ cpio)
+ am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+ am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+ am__untar='cpio -i -H $1 -d'
+ ;;
+ none)
+ am__tar=false
+ am__tar_=false
+ am__untar=false
+ ;;
+ esac
+
+ # If the value was cached, stop now. We just wanted to have am__tar
+ # and am__untar set.
+ test -n "${am_cv_prog_tar_$1}" && break
+
+ # tar/untar a dummy directory, and stop if the command works
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ echo GrepMe > conftest.dir/file
+ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+ rm -rf conftest.dir
+ if test -s conftest.tar; then
+ AM_RUN_LOG([$am__untar <conftest.tar])
+ grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+ fi
+done
+rm -rf conftest.dir
+
+AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
m4_include([acinclude.m4])
Modified: GNUnet/libltdl/configure
===================================================================
--- GNUnet/libltdl/configure 2007-09-30 03:31:18 UTC (rev 5678)
+++ GNUnet/libltdl/configure 2007-09-30 04:13:53 UTC (rev 5679)
@@ -809,6 +809,7 @@
INSTALL_PROGRAM
INSTALL_SCRIPT
INSTALL_DATA
+am__isrc
CYGPATH_W
PACKAGE
VERSION
@@ -817,7 +818,6 @@
AUTOMAKE
AUTOHEADER
MAKEINFO
-AMTAR
install_sh
STRIP
INSTALL_STRIP_PROGRAM
@@ -825,6 +825,9 @@
AWK
SET_MAKE
am__leading_dot
+AMTAR
+am__tar
+am__untar
CC
CFLAGS
LDFLAGS
@@ -1995,7 +1998,8 @@
## ------------------------ ##
## Automake Initialisation. ##
## ------------------------ ##
-am__api_version="1.8"
+am__api_version='1.10'
+
# Find a good install program. We prefer a C program (faster),
# so one script is as good as another. But avoid the broken or
# incompatible versions:
@@ -2147,31 +2151,54 @@
echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
fi
-if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
- # Keeping the `.' argument allows $(mkdir_p) to be used without
- # argument. Indeed, we sometimes output rules like
- # $(mkdir_p) $(somedir)
- # where $(somedir) is conditionally defined.
- # (`test -n '$(somedir)' && $(mkdir_p) $(somedir)' is a more
- # expensive solution, as it forces Make to start a sub-shell.)
- mkdir_p='mkdir -p -- .'
+{ echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5
+echo $ECHO_N "checking for a thread-safe mkdir -p... $ECHO_C" >&6; }
+if test -z "$MKDIR_P"; then
+ if test "${ac_cv_path_mkdir+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- # On NextStep and OpenStep, the `mkdir' command does not
- # recognize any option. It will interpret all options as
- # directories to create, and then abort because `.' already
- # exists.
- for d in ./-p ./--version;
- do
- test -d $d && rmdir $d
- done
- # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
- if test -f "$ac_aux_dir/mkinstalldirs"; then
- mkdir_p='$(mkinstalldirs)'
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in mkdir gmkdir; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x
"$as_dir/$ac_prog$ac_exec_ext"; } || continue
+ case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+ 'mkdir (GNU coreutils) '* | \
+ 'mkdir (coreutils) '* | \
+ 'mkdir (fileutils) '4.1*)
+ ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+ break 3;;
+ esac
+ done
+ done
+done
+IFS=$as_save_IFS
+
+fi
+
+ if test "${ac_cv_path_mkdir+set}" = set; then
+ MKDIR_P="$ac_cv_path_mkdir -p"
else
- mkdir_p='$(install_sh) -d'
+ # As a last resort, use the slow shell script. Don't cache a
+ # value for MKDIR_P within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the value is a relative name.
+ test -d ./--version && rmdir ./--version
+ MKDIR_P="$ac_install_sh -d"
fi
fi
+{ echo "$as_me:$LINENO: result: $MKDIR_P" >&5
+echo "${ECHO_T}$MKDIR_P" >&6; }
+mkdir_p="$MKDIR_P"
+case $mkdir_p in
+ [\\/$]* | ?:[\\/]*) ;;
+ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+
for ac_prog in gawk mawk nawk awk
do
# Extract the first word of "$ac_prog", so it can be a program name with
args.
@@ -2253,12 +2280,16 @@
fi
rmdir .tst 2>/dev/null
-# test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" &&
- test -f $srcdir/config.status; then
- { { echo "$as_me:$LINENO: error: source directory already configured; run
\"make distclean\" there first" >&5
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+ # is not polluted with repeated "-I."
+ am__isrc=' -I$(srcdir)'
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+ { { echo "$as_me:$LINENO: error: source directory already configured; run
\"make distclean\" there first" >&5
echo "$as_me: error: source directory already configured; run \"make
distclean\" there first" >&2;}
{ (exit 1); exit 1; }; }
+ fi
fi
# test whether we have cygpath
@@ -2292,11 +2323,8 @@
MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
-AMTAR=${AMTAR-"${am_missing_run}tar"}
-
-install_sh=${install_sh-"$am_aux_dir/install-sh"}
-
# Installed binaries are usually stripped using `strip' when the user
# run `make install-strip'. However `strip' might not be the right
# tool to use in cross-compilation environments, therefore Automake
@@ -2399,13 +2427,20 @@
fi
fi
-INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
# We need awk for the "check" target. The system "awk" is bad on
# some platforms.
+# Always define AMTAR for backward compatibility.
+AMTAR=${AMTAR-"${am_missing_run}tar"}
+am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
+
+
+
+
ac_config_headers="$ac_config_headers config.h:config-h.in"
@@ -3384,9 +3419,7 @@
am_depcomp="$ac_aux_dir/depcomp"
AMDEPBACKSLASH='\'
fi
-
-
-if test "x$enable_dependency_tracking" != xno; then
+ if test "x$enable_dependency_tracking" != xno; then
AMDEP_TRUE=
AMDEP_FALSE='#'
else
@@ -3396,7 +3429,6 @@
-
depcc="$CC" am_compiler_list=
{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
@@ -3464,6 +3496,7 @@
depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
$SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
>/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
${MAKE-make} -s -f confmf > /dev/null 2>&1; then
@@ -3493,9 +3526,7 @@
echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; }
CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-
-
-if
+ if
test "x$enable_dependency_tracking" != xno \
&& test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
am__fastdepCC_TRUE=
@@ -4484,7 +4515,7 @@
;;
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 4487 "configure"' > conftest.$ac_ext
+ echo '#line 4518 "configure"' > conftest.$ac_ext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
@@ -6003,6 +6034,7 @@
depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
$SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
>/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
${MAKE-make} -s -f confmf > /dev/null 2>&1; then
@@ -6032,9 +6064,7 @@
echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6; }
CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
-
-
-if
+ if
test "x$enable_dependency_tracking" != xno \
&& test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then
am__fastdepCXX_TRUE=
@@ -7510,11 +7540,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:7513: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:7543: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:7517: \$? = $ac_status" >&5
+ echo "$as_me:7547: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
@@ -7778,11 +7808,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:7781: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:7811: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:7785: \$? = $ac_status" >&5
+ echo "$as_me:7815: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
@@ -7882,11 +7912,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:7885: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:7915: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
- echo "$as_me:7889: \$? = $ac_status" >&5
+ echo "$as_me:7919: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
@@ -10179,7 +10209,7 @@
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
-#line 10182 "configure"
+#line 10212 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -10279,7 +10309,7 @@
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
-#line 10282 "configure"
+#line 10312 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -12619,11 +12649,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:12622: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:12652: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:12626: \$? = $ac_status" >&5
+ echo "$as_me:12656: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
@@ -12723,11 +12753,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:12726: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:12756: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
- echo "$as_me:12730: \$? = $ac_status" >&5
+ echo "$as_me:12760: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
@@ -14284,11 +14314,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:14287: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:14317: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:14291: \$? = $ac_status" >&5
+ echo "$as_me:14321: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
@@ -14388,11 +14418,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:14391: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:14421: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
- echo "$as_me:14395: \$? = $ac_status" >&5
+ echo "$as_me:14425: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
@@ -16579,11 +16609,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:16582: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:16612: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:16586: \$? = $ac_status" >&5
+ echo "$as_me:16616: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
@@ -16847,11 +16877,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:16850: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:16880: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:16854: \$? = $ac_status" >&5
+ echo "$as_me:16884: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
@@ -16951,11 +16981,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:16954: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:16984: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
- echo "$as_me:16958: \$? = $ac_status" >&5
+ echo "$as_me:16988: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
@@ -19851,9 +19881,7 @@
fi
-
-
-if test x"${enable_ltdl_install-no}" != xno; then
+ if test x"${enable_ltdl_install-no}" != xno; then
INSTALL_LTDL_TRUE=
INSTALL_LTDL_FALSE='#'
else
@@ -19861,9 +19889,7 @@
INSTALL_LTDL_FALSE=
fi
-
-
-if test x"${enable_ltdl_convenience-no}" != xno; then
+ if test x"${enable_ltdl_convenience-no}" != xno; then
CONVENIENCE_LTDL_TRUE=
CONVENIENCE_LTDL_FALSE='#'
else
@@ -20688,7 +20714,7 @@
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
-#line 20691 "configure"
+#line 20717 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -22640,6 +22666,7 @@
ac_pwd='$ac_pwd'
srcdir='$srcdir'
INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
@@ -22847,6 +22874,7 @@
INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
INSTALL_DATA!$INSTALL_DATA$ac_delim
+am__isrc!$am__isrc$ac_delim
CYGPATH_W!$CYGPATH_W$ac_delim
PACKAGE!$PACKAGE$ac_delim
VERSION!$VERSION$ac_delim
@@ -22855,7 +22883,6 @@
AUTOMAKE!$AUTOMAKE$ac_delim
AUTOHEADER!$AUTOHEADER$ac_delim
MAKEINFO!$MAKEINFO$ac_delim
-AMTAR!$AMTAR$ac_delim
install_sh!$install_sh$ac_delim
STRIP!$STRIP$ac_delim
INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim
@@ -22863,6 +22890,9 @@
AWK!$AWK$ac_delim
SET_MAKE!$SET_MAKE$ac_delim
am__leading_dot!$am__leading_dot$ac_delim
+AMTAR!$AMTAR$ac_delim
+am__tar!$am__tar$ac_delim
+am__untar!$am__untar$ac_delim
CC!$CC$ac_delim
CFLAGS!$CFLAGS$ac_delim
LDFLAGS!$LDFLAGS$ac_delim
@@ -22901,9 +22931,6 @@
CXXFLAGS!$CXXFLAGS$ac_delim
ac_ct_CXX!$ac_ct_CXX$ac_delim
CXXDEPMODE!$CXXDEPMODE$ac_delim
-am__fastdepCXX_TRUE!$am__fastdepCXX_TRUE$ac_delim
-am__fastdepCXX_FALSE!$am__fastdepCXX_FALSE$ac_delim
-CXXCPP!$CXXCPP$ac_delim
_ACEOF
if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then
@@ -22945,6 +22972,9 @@
ac_delim='%!_!# '
for ac_last_try in false false false false false :; do
cat >conf$$subs.sed <<_ACEOF
+am__fastdepCXX_TRUE!$am__fastdepCXX_TRUE$ac_delim
+am__fastdepCXX_FALSE!$am__fastdepCXX_FALSE$ac_delim
+CXXCPP!$CXXCPP$ac_delim
F77!$F77$ac_delim
FFLAGS!$FFLAGS$ac_delim
ac_ct_F77!$ac_ct_F77$ac_delim
@@ -22959,7 +22989,7 @@
LTLIBOBJS!$LTLIBOBJS$ac_delim
_ACEOF
- if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 12; then
+ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 15; then
break
elif $ac_last_try; then
{ { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
@@ -23186,6 +23216,11 @@
[\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
*) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
esac
+ ac_MKDIR_P=$MKDIR_P
+ case $MKDIR_P in
+ [\\/$]* | ?:[\\/]* ) ;;
+ */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+ esac
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
@@ -23239,6 +23274,7 @@
s&@abs_builddir@&$ac_abs_builddir&;t t
s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
$ac_datarootdir_hack
" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed"
>$tmp/out
@@ -23403,8 +23439,9 @@
# some people rename them; so instead we look at the file content.
# Grep'ing the first line is not enough: some people post-process
# each Makefile.in and add a new line on top of each file to say so.
- # So let's grep whole file.
- if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed 10q "$mf" | grep '^#.*generated by automake' > /dev/null 2>&1; then
dirpart=`$as_dirname -- "$mf" ||
$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$mf" : 'X\(//\)[^/]' \| \
@@ -23431,27 +23468,21 @@
else
continue
fi
- grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue
- # Extract the definition of DEP_FILES from the Makefile without
- # running `make'.
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running `make'.
DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
# When using ansi2knr, U may be empty or an underscore; expand it
U=`sed -n 's/^U = //p' < "$mf"`
- test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
- # We invoke sed twice because it is the simplest approach to
- # changing $(DEPDIR) to its actual value in the expansion.
- for file in `sed -n '
- /^DEP_FILES = .*\\\\$/ {
- s/^DEP_FILES = //
- :loop
- s/\\\\$//
- p
- n
- /\\\\$/ b loop
- p
- }
- /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
# Make sure the directory exists.
test -f "$dirpart/$file" && continue
Modified: GNUnet/libltdl/install-sh
===================================================================
--- GNUnet/libltdl/install-sh 2007-09-30 03:31:18 UTC (rev 5678)
+++ GNUnet/libltdl/install-sh 2007-09-30 04:13:53 UTC (rev 5679)
@@ -1,7 +1,7 @@
#!/bin/sh
# install - install a program, script, or datafile
-scriptversion=2004-04-01.17
+scriptversion=2006-10-14.15
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
@@ -39,15 +39,24 @@
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
-# from scratch. It can only install one file at a time, a restriction
-# shared with many OS's install programs.
+# from scratch.
+nl='
+'
+IFS=" "" $nl"
+
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
doit="${DOITPROG-}"
+if test -z "$doit"; then
+ doit_exec=exec
+else
+ doit_exec=$doit
+fi
-# put in absolute paths if you don't have them in your path; or use env. vars.
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
mvprog="${MVPROG-mv}"
cpprog="${CPPROG-cp}"
@@ -58,10 +67,13 @@
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"
-transformbasename=
-transform_arg=
-instcmd="$mvprog"
-chmodcmd="$chmodprog 0755"
+posix_glob=
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
+
+chmodcmd=$chmodprog
chowncmd=
chgrpcmd=
stripcmd=
@@ -70,23 +82,27 @@
src=
dst=
dir_arg=
+dstarg=
+no_target_directory=
-usage="Usage: $0 [OPTION]... SRCFILE DSTFILE
+usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
or: $0 [OPTION]... SRCFILES... DIRECTORY
- or: $0 -d DIRECTORIES...
+ or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+ or: $0 [OPTION]... -d DIRECTORIES...
-In the first form, install SRCFILE to DSTFILE, removing SRCFILE by default.
-In the second, create the directory path DIR.
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
Options:
--b=TRANSFORMBASENAME
--c copy source (using $cpprog) instead of moving (using $mvprog).
+-c (ignored)
-d create directories instead of installing files.
--g GROUP $chgrp installed files to GROUP.
--m MODE $chmod installed files to MODE.
--o USER $chown installed files to USER.
--s strip installed files (using $stripprog).
--t=TRANSFORM
+-g GROUP $chgrpprog installed files to GROUP.
+-m MODE $chmodprog installed files to MODE.
+-o USER $chownprog installed files to USER.
+-s $stripprog installed files.
+-t DIRECTORY install into DIRECTORY.
+-T report an error if DSTFILE is a directory.
--help display this help and exit.
--version display version info and exit.
@@ -94,16 +110,11 @@
CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
"
-while test -n "$1"; do
+while test $# -ne 0; do
case $1 in
- -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
- shift
+ -c) shift
continue;;
- -c) instcmd=$cpprog
- shift
- continue;;
-
-d) dir_arg=true
shift
continue;;
@@ -113,11 +124,17 @@
shift
continue;;
- --help) echo "$usage"; exit 0;;
+ --help) echo "$usage"; exit $?;;
- -m) chmodcmd="$chmodprog $2"
+ -m) mode=$2
shift
shift
+ case $mode in
+ *' '* | *' '* | *'
+'* | *'*'* | *'?'* | *'['*)
+ echo "$0: invalid mode: $mode" >&2
+ exit 1;;
+ esac
continue;;
-o) chowncmd="$chownprog $2"
@@ -129,30 +146,44 @@
shift
continue;;
- -t=*) transformarg=`echo $1 | sed 's/-t=//'`
- shift
- continue;;
+ -t) dstarg=$2
+ shift
+ shift
+ continue;;
- --version) echo "$0 $scriptversion"; exit 0;;
+ -T) no_target_directory=true
+ shift
+ continue;;
- *) # When -d is used, all remaining arguments are directories to create.
- test -n "$dir_arg" && break
- # Otherwise, the last argument is the destination. Remove it from
address@hidden
- for arg
- do
- if test -n "$dstarg"; then
- # $@ is not empty: it contains at least $arg.
- set fnord "$@" "$dstarg"
- shift # fnord
- fi
- shift # arg
- dstarg=$arg
- done
+ --version) echo "$0 $scriptversion"; exit $?;;
+
+ --) shift
break;;
+
+ -*) echo "$0: invalid option: $1" >&2
+ exit 1;;
+
+ *) break;;
esac
done
-if test -z "$1"; then
+if test $# -ne 0 && test -z "$dir_arg$dstarg"; then
+ # When -d is used, all remaining arguments are directories to create.
+ # When -t is used, the destination is already specified.
+ # Otherwise, the last argument is the destination. Remove it from
address@hidden
+ for arg
+ do
+ if test -n "$dstarg"; then
+ # $@ is not empty: it contains at least $arg.
+ set fnord "$@" "$dstarg"
+ shift # fnord
+ fi
+ shift # arg
+ dstarg=$arg
+ done
+fi
+
+if test $# -eq 0; then
if test -z "$dir_arg"; then
echo "$0: no input file specified." >&2
exit 1
@@ -162,6 +193,33 @@
exit 0
fi
+if test -z "$dir_arg"; then
+ trap '(exit $?); exit' 1 2 13 15
+
+ # Set umask so as not to create temps with too-generous modes.
+ # However, 'strip' requires both read and write access to temps.
+ case $mode in
+ # Optimize common cases.
+ *644) cp_umask=133;;
+ *755) cp_umask=22;;
+
+ *[0-7])
+ if test -z "$stripcmd"; then
+ u_plus_rw=
+ else
+ u_plus_rw='% 200'
+ fi
+ cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+ *)
+ if test -z "$stripcmd"; then
+ u_plus_rw=
+ else
+ u_plus_rw=,u+rw
+ fi
+ cp_umask=$mode$u_plus_rw;;
+ esac
+fi
+
for src
do
# Protect names starting with `-'.
@@ -171,16 +229,12 @@
if test -n "$dir_arg"; then
dst=$src
- src=
+ dstdir=$dst
+ test -d "$dstdir"
+ dstdir_status=$?
+ else
- if test -d "$dst"; then
- instcmd=:
- chmodcmd=
- else
- instcmd=$mkdirprog
- fi
- else
- # Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+ # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.
if test ! -f "$src" && test ! -d "$src"; then
@@ -202,86 +256,216 @@
# If destination is a directory, append the input filename; won't work
# if double slashes aren't ignored.
if test -d "$dst"; then
- dst=$dst/`basename "$src"`
+ if test -n "$no_target_directory"; then
+ echo "$0: $dstarg: Is a directory" >&2
+ exit 1
+ fi
+ dstdir=$dst
+ dst=$dstdir/`basename "$src"`
+ dstdir_status=0
+ else
+ # Prefer dirname, but fall back on a substitute if dirname fails.
+ dstdir=`
+ (dirname "$dst") 2>/dev/null ||
+ expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$dst" : 'X\(//\)[^/]' \| \
+ X"$dst" : 'X\(//\)$' \| \
+ X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
+ echo X"$dst" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'
+ `
+
+ test -d "$dstdir"
+ dstdir_status=$?
fi
fi
- # This sed command emulates the dirname command.
- dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+ obsolete_mkdir_used=false
- # Make sure that the destination directory exists.
+ if test $dstdir_status != 0; then
+ case $posix_mkdir in
+ '')
+ # Create intermediate dirs using mode 755 as modified by the umask.
+ # This is like FreeBSD 'install' as of 1997-10-28.
+ umask=`umask`
+ case $stripcmd.$umask in
+ # Optimize common cases.
+ *[2367][2367]) mkdir_umask=$umask;;
+ .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
- # Skip lots of stat calls in the usual case.
- if test ! -d "$dstdir"; then
- defaultIFS='
- '
- IFS="${IFS-$defaultIFS}"
+ *[0-7])
+ mkdir_umask=`expr $umask + 22 \
+ - $umask % 100 % 40 + $umask % 20 \
+ - $umask % 10 % 4 + $umask % 2
+ `;;
+ *) mkdir_umask=$umask,go-w;;
+ esac
- oIFS=$IFS
- # Some sh's can't handle IFS=/ for some reason.
- IFS='%'
- set - `echo "$dstdir" | sed -e 's@/@address@hidden' -e 'address@hidden@/@'`
- IFS=$oIFS
+ # With -d, create the new directory with the user-specified mode.
+ # Otherwise, rely on $mkdir_umask.
+ if test -n "$dir_arg"; then
+ mkdir_mode=-m$mode
+ else
+ mkdir_mode=
+ fi
- pathcomp=
+ posix_mkdir=false
+ case $umask in
+ *[123567][0-7][0-7])
+ # POSIX mkdir -p sets u+wx bits regardless of umask, which
+ # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+ ;;
+ *)
+ tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+ trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
- while test $# -ne 0 ; do
- pathcomp=$pathcomp$1
+ if (umask $mkdir_umask &&
+ exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+ then
+ if test -z "$dir_arg" || {
+ # Check for POSIX incompatibilities with -m.
+ # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+ # other-writeable bit of parent directory when it shouldn't.
+ # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+ ls_ld_tmpdir=`ls -ld "$tmpdir"`
+ case $ls_ld_tmpdir in
+ d????-?r-*) different_mode=700;;
+ d????-?--*) different_mode=755;;
+ *) false;;
+ esac &&
+ $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+ ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+ test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+ }
+ }
+ then posix_mkdir=:
+ fi
+ rmdir "$tmpdir/d" "$tmpdir"
+ else
+ # Remove any dirs left behind by ancient mkdir implementations.
+ rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+ fi
+ trap '' 0;;
+ esac;;
+ esac
+
+ if
+ $posix_mkdir && (
+ umask $mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+ )
+ then :
+ else
+
+ # The umask is ridiculous, or mkdir does not conform to POSIX,
+ # or it failed possibly due to a race condition. Create the
+ # directory the slow way, step by step, checking for races as we go.
+
+ case $dstdir in
+ /*) prefix=/ ;;
+ -*) prefix=./ ;;
+ *) prefix= ;;
+ esac
+
+ case $posix_glob in
+ '')
+ if (set -f) 2>/dev/null; then
+ posix_glob=true
+ else
+ posix_glob=false
+ fi ;;
+ esac
+
+ oIFS=$IFS
+ IFS=/
+ $posix_glob && set -f
+ set fnord $dstdir
shift
- if test ! -d "$pathcomp"; then
- $mkdirprog "$pathcomp" || lasterr=$?
- # mkdir can fail with a `File exist' error in case several
- # install-sh are creating the directory concurrently. This
- # is OK.
- test ! -d "$pathcomp" && { (exit ${lasterr-1}); exit; }
+ $posix_glob && set +f
+ IFS=$oIFS
+
+ prefixes=
+
+ for d
+ do
+ test -z "$d" && continue
+
+ prefix=$prefix$d
+ if test -d "$prefix"; then
+ prefixes=
+ else
+ if $posix_mkdir; then
+ (umask=$mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+ # Don't fail if two instances are running concurrently.
+ test -d "$prefix" || exit 1
+ else
+ case $prefix in
+ *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) qprefix=$prefix;;
+ esac
+ prefixes="$prefixes '$qprefix'"
+ fi
+ fi
+ prefix=$prefix/
+ done
+
+ if test -n "$prefixes"; then
+ # Don't fail if two instances are running concurrently.
+ (umask $mkdir_umask &&
+ eval "\$doit_exec \$mkdirprog $prefixes") ||
+ test -d "$dstdir" || exit 1
+ obsolete_mkdir_used=true
fi
- pathcomp=$pathcomp/
- done
+ fi
fi
if test -n "$dir_arg"; then
- $doit $instcmd "$dst" \
- && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
- && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
- && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
- && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
-
+ { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+ { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+ { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+ test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
else
- # If we're going to rename the final executable, determine the name now.
- if test -z "$transformarg"; then
- dstfile=`basename "$dst"`
- else
- dstfile=`basename "$dst" $transformbasename \
- | sed $transformarg`$transformbasename
- fi
- # don't allow the sed command to completely eliminate the filename.
- test -z "$dstfile" && dstfile=`basename "$dst"`
-
# Make a couple of temp file names in the proper directory.
dsttmp=$dstdir/_inst.$$_
rmtmp=$dstdir/_rm.$$_
# Trap to clean up those temp files at exit.
- trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
- trap '(exit $?); exit' 1 2 13 15
+ trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
- # Move or copy the file name to the temp name
- $doit $instcmd "$src" "$dsttmp" &&
+ # Copy the file name to the temp name.
+ (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
# and set any options; do chmod last to preserve setuid bits.
#
# If any of these fail, we abort the whole thing. If we want to
# ignore errors from any of these, just make sure not to ignore
- # errors from the above "$doit $instcmd $src $dsttmp" command.
+ # errors from the above "$doit $cpprog $src $dsttmp" command.
#
{ test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
&& { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
&& { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
- && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
+ && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
# Now rename the file to the real destination.
- { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
+ { $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null \
|| {
# The rename failed, perhaps because mv can't rename something else
# to itself, or perhaps because mv is so ancient that it does not
@@ -293,12 +477,13 @@
# reasons. In this case, the final cleanup might fail but the new
# file should still install successfully.
{
- if test -f "$dstdir/$dstfile"; then
- $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
- || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
+ if test -f "$dst"; then
+ $doit $rmcmd -f "$dst" 2>/dev/null \
+ || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null \
+ && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }; }\
|| {
- echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
- (exit 1); exit
+ echo "$0: cannot unlink or rename $dst" >&2
+ (exit 1); exit 1
}
else
:
@@ -306,17 +491,14 @@
} &&
# Now rename the file to the real destination.
- $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
+ $doit $mvcmd "$dsttmp" "$dst"
}
- }
- fi || { (exit 1); exit; }
+ } || exit 1
+
+ trap '' 0
+ fi
done
-# The final little trick to "correctly" pass the exit status to the exit trap.
-{
- (exit 0); exit
-}
-
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
Modified: GNUnet/libltdl/ltmain.sh
===================================================================
--- GNUnet/libltdl/ltmain.sh 2007-09-30 03:31:18 UTC (rev 5678)
+++ GNUnet/libltdl/ltmain.sh 2007-09-30 04:13:53 UTC (rev 5679)
@@ -1,8 +1,8 @@
# ltmain.sh - Provide generalized library-building support services.
# NOTE: Changing this file will not affect anything until you rerun configure.
#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
-# 2007 Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005
+# Free Software Foundation, Inc.
# Originally by Gordon Matzigkeit <address@hidden>, 1996
#
# This program is free software; you can redistribute it and/or modify
@@ -43,22 +43,14 @@
PROGRAM=ltmain.sh
PACKAGE=libtool
-VERSION="1.5.24 Debian 1.5.24-1"
-TIMESTAMP=" (1.1220.2.456 2007/06/24 02:25:32)"
+VERSION="1.5.22 Debian 1.5.22-4"
+TIMESTAMP=" (1.1220.2.365 2005/12/18 22:14:06)"
-# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes.
+if test -n "${ZSH_VERSION+set}" ; then
setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
# Check that we have a working $echo.
if test "X$1" = X--no-reexec; then
@@ -113,14 +105,12 @@
# These must not be set unconditionally because not all systems understand
# e.g. LANG=C (notably SCO).
# We save the old values to restore during execute mode.
-for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
-do
- eval "if test \"\${$lt_var+set}\" = set; then
- save_$lt_var=\$$lt_var
- $lt_var=C
- export $lt_var
- fi"
-done
+if test "${LC_ALL+set}" = set; then
+ save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
+fi
+if test "${LANG+set}" = set; then
+ save_LANG="$LANG"; LANG=C; export LANG
+fi
# Make sure IFS has a sensible default
lt_nl='
@@ -146,8 +136,6 @@
preserve_args=
lo2o="s/\\.lo\$/.${objext}/"
o2lo="s/\\.${objext}\$/.lo/"
-extracted_archives=
-extracted_serial=0
#####################################
# Shell function definitions:
@@ -208,13 +196,7 @@
if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
$EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
win32_nmres=`eval $NM -f posix -A $1 | \
- $SED -n -e '1,100{
- / I /{
- s,.*,import,
- p
- q
- }
- }'`
+ $SED -n -e '1,100{/ I /{s,.*,import,;p;q;};}'`
case $win32_nmres in
import*) win32_libid_type="x86 archive import";;
*) win32_libid_type="x86 archive static";;
@@ -345,17 +327,7 @@
*) my_xabs=`pwd`"/$my_xlib" ;;
esac
my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
- my_xlib_u=$my_xlib
- while :; do
- case " $extracted_archives " in
- *" $my_xlib_u "*)
- extracted_serial=`expr $extracted_serial + 1`
- my_xlib_u=lt$extracted_serial-$my_xlib ;;
- *) break ;;
- esac
- done
- extracted_archives="$extracted_archives $my_xlib_u"
- my_xdir="$my_gentop/$my_xlib_u"
+ my_xdir="$my_gentop/$my_xlib"
$show "${rm}r $my_xdir"
$run ${rm}r "$my_xdir"
@@ -482,12 +454,11 @@
;;
--version)
- echo "\
-$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP
-
-Copyright (C) 2007 Free Software Foundation, Inc.
-This is free software; see the source for copying conditions. There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+ $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
+ $echo
+ $echo "Copyright (C) 2005 Free Software Foundation, Inc."
+ $echo "This is free software; see the source for copying conditions.
There is NO"
+ $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR
PURPOSE."
exit $?
;;
@@ -784,10 +755,9 @@
*.class) xform=class ;;
*.cpp) xform=cpp ;;
*.cxx) xform=cxx ;;
- *.[fF][09]?) xform=[fF][09]. ;;
+ *.f90) xform=f90 ;;
*.for) xform=for ;;
*.java) xform=java ;;
- *.obj) xform=obj ;;
esac
libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
@@ -1168,9 +1138,8 @@
for arg
do
case $arg in
- -all-static | -static | -static-libtool-libs)
- case $arg in
- -all-static)
+ -all-static | -static)
+ if test "X$arg" = "X-all-static"; then
if test "$build_libtool_libs" = yes && test -z "$link_static_flag";
then
$echo "$modename: warning: complete static linking is impossible in
this configuration" 1>&2
fi
@@ -1178,20 +1147,12 @@
dlopen_self=$dlopen_self_static
fi
prefer_static_libs=yes
- ;;
- -static)
+ else
if test -z "$pic_flag" && test -n "$link_static_flag"; then
dlopen_self=$dlopen_self_static
fi
prefer_static_libs=built
- ;;
- -static-libtool-libs)
- if test -z "$pic_flag" && test -n "$link_static_flag"; then
- dlopen_self=$dlopen_self_static
- fi
- prefer_static_libs=yes
- ;;
- esac
+ fi
build_libtool_libs=no
build_old_libs=yes
break
@@ -1639,7 +1600,7 @@
continue
;;
- -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
compiler_flags="$compiler_flags $arg"
compile_command="$compile_command $arg"
finalize_command="$finalize_command $arg"
@@ -1659,11 +1620,10 @@
# -m* pass through architecture-specific compiler args for GCC
# -m*, -t[45]*, -txscale* pass through architecture-specific
# compiler args for GCC
- # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
- # -F/path gives path to uninstalled frameworks, gcc on darwin
+ # -pg pass through profiling flag for GCC
# @file GCC response files
- -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
- -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)
+ -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*|-pg| \
+ -t[45]*|-txscale*|@*)
# Unknown arguments in both finalize_command and compile_command need
# to be aesthetically quoted because they are evaled later.
@@ -1691,9 +1651,9 @@
-no-install)
case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin*)
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
# The PATH hackery in wrapper scripts is required on Windows
- # and Darwin in order for the loader to find any dlls it needs.
+ # in order for the loader to find any dlls it needs.
$echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
$echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
fast_install=no
@@ -1752,7 +1712,7 @@
continue
;;
- -static | -static-libtool-libs)
+ -static)
# The effects of -static are defined in a previous loop.
# We used to do the same as -all-static on platforms that
# didn't have a PIC flag, but the assumption that the effects
@@ -2137,7 +2097,7 @@
lib=
found=no
case $deplib in
-
-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
if test "$linkmode,$pass" = "prog,link"; then
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
@@ -2533,9 +2493,7 @@
if test "$linkmode,$pass" = "prog,link"; then
if test -n "$library_names" &&
- { { test "$prefer_static_libs" = no ||
- test "$prefer_static_libs,$installed" = "built,yes"; } ||
- test -z "$old_library"; }; then
+ { test "$prefer_static_libs" = no || test -z "$old_library"; };
then
# We need to hardcode the library path
if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
# Make sure the rpath contains only unique directories.
@@ -3231,7 +3189,7 @@
# which has an extra 1 added just for fun
#
case $version_type in
- darwin|linux|osf|windows|none)
+ darwin|linux|osf|windows)
current=`expr $number_major + $number_minor`
age="$number_minor"
revision="$number_revision"
@@ -3242,10 +3200,9 @@
age="0"
;;
irix|nonstopux)
- current=`expr $number_major + $number_minor`
+ current=`expr $number_major + $number_minor - 1`
age="$number_minor"
revision="$number_minor"
- lt_irix_increment=no
;;
*)
$echo "$modename: unknown library version type \`$version_type'"
1>&2
@@ -3309,8 +3266,7 @@
versuffix="$major.$age.$revision"
# Darwin ld doesn't like 0 for these options...
minor_current=`expr $current + 1`
- xlcverstring="${wl}-compatibility_version ${wl}$minor_current
${wl}-current_version ${wl}$minor_current.$revision"
- verstring="-compatibility_version $minor_current -current_version
$minor_current.$revision"
+ verstring="${wl}-compatibility_version ${wl}$minor_current
${wl}-current_version ${wl}$minor_current.$revision"
;;
freebsd-aout)
@@ -3324,11 +3280,8 @@
;;
irix | nonstopux)
- if test "X$lt_irix_increment" = "Xno"; then
- major=`expr $current - $age`
- else
- major=`expr $current - $age + 1`
- fi
+ major=`expr $current - $age + 1`
+
case $version_type in
nonstopux) verstring_prefix=nonstopux ;;
*) verstring_prefix=sgi ;;
@@ -3465,11 +3418,11 @@
fi
# Eliminate all temporary directories.
- #for path in $notinst_path; do
- # lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s%
$path % %g"`
- # deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
- # dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s%
-L$path % %g"`
- #done
+ for path in $notinst_path; do
+ lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
+ deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
+ dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path %
%g"`
+ done
if test -n "$xrpath"; then
# If the user specified any rpath flags, then add them.
@@ -3570,12 +3523,13 @@
int main() { return 0; }
EOF
$rm conftest
- if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
+ $LTCC $LTCFLAGS -o conftest conftest.c $deplibs
+ if test "$?" -eq 0 ; then
ldd_output=`ldd conftest`
for i in $deplibs; do
name=`expr $i : '-l\(.*\)'`
# If $name is empty we are operating on a -L argument.
- if test "$name" != "" && test "$name" != "0"; then
+ if test "$name" != "" && test "$name" -ne "0"; then
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ;
then
case " $predeps $postdeps " in
*" $i "*)
@@ -3614,7 +3568,9 @@
# If $name is empty we are operating on a -L argument.
if test "$name" != "" && test "$name" != "0"; then
$rm conftest
- if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
+ $LTCC $LTCFLAGS -o conftest conftest.c $i
+ # Did it work?
+ if test "$?" -eq 0 ; then
ldd_output=`ldd conftest`
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes"
; then
case " $predeps $postdeps " in
@@ -3646,7 +3602,7 @@
droppeddeps=yes
$echo
$echo "*** Warning! Library $i is needed by this library but
I was not able to"
- $echo "*** make it link in! You will probably need to
install it or some"
+ $echo "*** make it link in! You will probably need to
install it or some"
$echo "*** library that it depends on before this library
will be fully"
$echo "*** functional. Installing it before continuing would
be even better."
fi
@@ -3932,10 +3888,7 @@
test -n "$hardcode_libdirs"; then
libdir="$hardcode_libdirs"
if test -n "$hardcode_libdir_flag_spec_ld"; then
- case $archive_cmds in
- *\$LD*) eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" ;;
- *) eval dep_rpath=\"$hardcode_libdir_flag_spec\" ;;
- esac
+ eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
else
eval dep_rpath=\"$hardcode_libdir_flag_spec\"
fi
@@ -4294,14 +4247,12 @@
reload_conv_objs=
gentop=
# reload_cmds runs $LD directly, so let us get rid of
- # -Wl from whole_archive_flag_spec and hope we can get by with
- # turning comma into space..
+ # -Wl from whole_archive_flag_spec
wl=
if test -n "$convenience"; then
if test -n "$whole_archive_flag_spec"; then
- eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
- reload_conv_objs=$reload_objs\ `$echo "X$tmp_whole_archive_flags" |
$Xsed -e 's|,| |g'`
+ eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
else
gentop="$output_objdir/${obj}x"
generated="$generated $gentop"
@@ -4749,16 +4700,16 @@
case $host in
*cygwin* | *mingw* )
if test -f "$output_objdir/${outputname}.def" ; then
- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e
"address@hidden@%$output_objdir/${outputname}.def
$output_objdir/${outputname}S.${objext}%" | $NL2SP`
- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e
"address@hidden@%$output_objdir/${outputname}.def
$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+ compile_command=`$echo "X$compile_command" | $Xsed -e
"address@hidden@%$output_objdir/${outputname}.def
$output_objdir/${outputname}S.${objext}%"`
+ finalize_command=`$echo "X$finalize_command" | $Xsed -e
"address@hidden@%$output_objdir/${outputname}.def
$output_objdir/${outputname}S.${objext}%"`
else
- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e
"address@hidden@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e
"address@hidden@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+ compile_command=`$echo "X$compile_command" | $Xsed -e
"address@hidden@%$output_objdir/${outputname}S.${objext}%"`
+ finalize_command=`$echo "X$finalize_command" | $Xsed -e
"address@hidden@%$output_objdir/${outputname}S.${objext}%"`
fi
;;
* )
- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e
"address@hidden@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e
"address@hidden@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+ compile_command=`$echo "X$compile_command" | $Xsed -e
"address@hidden@%$output_objdir/${outputname}S.${objext}%"`
+ finalize_command=`$echo "X$finalize_command" | $Xsed -e
"address@hidden@%$output_objdir/${outputname}S.${objext}%"`
;;
esac
;;
@@ -4773,13 +4724,13 @@
# really was required.
# Nullify the symbol file.
- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%
@address@hidden" | $NL2SP`
- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%
@address@hidden" | $NL2SP`
+ compile_command=`$echo "X$compile_command" | $Xsed -e "s%
@address@hidden"`
+ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%
@address@hidden"`
fi
if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
# Replace the output file specification.
- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e
'address@hidden@%'"$output"'%g' | $NL2SP`
+ compile_command=`$echo "X$compile_command" | $Xsed -e
'address@hidden@%'"$output"'%g'`
link_command="$compile_command$compile_rpath"
# We have no uninstalled library dependencies, so finalize right now.
@@ -4866,7 +4817,7 @@
if test "$fast_install" != no; then
link_command="$finalize_var$compile_command$finalize_rpath"
if test "$fast_install" = yes; then
- relink_command=`$echo "X$compile_var$compile_command$compile_rpath"
| $SP2NL | $Xsed -e 'address@hidden@%\$progdir/\$file%g' | $NL2SP`
+ relink_command=`$echo "X$compile_var$compile_command$compile_rpath"
| $Xsed -e 'address@hidden@%\$progdir/\$file%g'`
else
# fast_install is set to needless
relink_command=
@@ -4903,7 +4854,7 @@
fi
done
relink_command="(cd `pwd`; $relink_command)"
- relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e
"$sed_quote_subst" | $NL2SP`
+ relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
fi
# Quote $echo for shipping.
@@ -5310,20 +5261,6 @@
Xsed='${SED} -e 1s/^X//'
sed_quote_subst='$sed_quote_subst'
-# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
-if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on \${1+\"address@hidden"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '\${1+\"address@hidden"}'='\"address@hidden"'
- setopt NO_GLOB_SUBST
-else
- case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
@@ -5466,7 +5403,7 @@
;;
esac
$echo >> $output "\
- \$echo \"\$0: cannot exec \$program \$*\"
+ \$echo \"\$0: cannot exec \$program \${1+\"address@hidden"}\"
exit $EXIT_FAILURE
fi
else
@@ -5652,7 +5589,7 @@
done
# Quote the link command for shipping.
relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink
$libtool_args @inst_prefix_dir@)"
- relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e
"$sed_quote_subst" | $NL2SP`
+ relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
if test "$hardcode_automatic" = yes ; then
relink_command=
fi
@@ -5997,9 +5934,9 @@
if test -n "$inst_prefix_dir"; then
# Stick the inst_prefix_dir data into the link command.
- relink_command=`$echo "$relink_command" | $SP2NL | $SED
"address@hidden@%-inst-prefix-dir $inst_prefix_dir%" | $NL2SP`
+ relink_command=`$echo "$relink_command" | $SED
"address@hidden@%-inst-prefix-dir $inst_prefix_dir%"`
else
- relink_command=`$echo "$relink_command" | $SP2NL | $SED
"address@hidden@%%" | $NL2SP`
+ relink_command=`$echo "$relink_command" | $SED "address@hidden@%%"`
fi
$echo "$modename: warning: relinking \`$file'" 1>&2
@@ -6208,7 +6145,7 @@
file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
outputname="$tmpdir/$file"
# Replace the output file specification.
- relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e
'address@hidden@%'"$outputname"'%g' | $NL2SP`
+ relink_command=`$echo "X$relink_command" | $Xsed -e
'address@hidden@%'"$outputname"'%g'`
$show "$relink_command"
if $run eval "$relink_command"; then :
@@ -6419,10 +6356,8 @@
if test -f "$dir/$objdir/$dlname"; then
dir="$dir/$objdir"
else
- if test ! -f "$dir/$dlname"; then
- $echo "$modename: cannot find \`$dlname' in \`$dir' or
\`$dir/$objdir'" 1>&2
- exit $EXIT_FAILURE
- fi
+ $echo "$modename: cannot find \`$dlname' in \`$dir' or
\`$dir/$objdir'" 1>&2
+ exit $EXIT_FAILURE
fi
;;
@@ -6486,12 +6421,12 @@
fi
# Restore saved environment variables
- for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
- do
- eval "if test \"\${save_$lt_var+set}\" = set; then
- $lt_var=\$save_$lt_var; export $lt_var
- fi"
- done
+ if test "${save_LC_ALL+set}" = set; then
+ LC_ALL="$save_LC_ALL"; export LC_ALL
+ fi
+ if test "${save_LANG+set}" = set; then
+ LANG="$save_LANG"; export LANG
+ fi
# Now prepare to actually exec the command.
exec_cmd="\$cmd$args"
@@ -6848,9 +6783,9 @@
-dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
-export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
-export-symbols SYMFILE
- try to export only the symbols listed in SYMFILE
+ try to export only the symbols listed in SYMFILE
-export-symbols-regex REGEX
- try to export only the symbols matching REGEX
+ try to export only the symbols matching REGEX
-LLIBDIR search LIBDIR for required installed libraries
-lNAME OUTPUT-FILE requires the installed library libNAME
-module build a library that can dlopened
@@ -6864,11 +6799,9 @@
-release RELEASE specify package release information
-rpath LIBDIR the created library will eventually be installed in LIBDIR
-R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
- -static do not do any dynamic linking of uninstalled libtool
libraries
- -static-libtool-libs
- do not do any dynamic linking of libtool libraries
+ -static do not do any dynamic linking of libtool libraries
-version-info CURRENT[:REVISION[:AGE]]
- specify library version info [each variable defaults to 0]
+ specify library version info [each variable defaults to 0]
All other options (arguments beginning with \`-') are ignored.
Modified: GNUnet/libltdl/missing
===================================================================
--- GNUnet/libltdl/missing 2007-09-30 03:31:18 UTC (rev 5678)
+++ GNUnet/libltdl/missing 2007-09-30 04:13:53 UTC (rev 5679)
@@ -1,9 +1,9 @@
#! /bin/sh
# Common stub for a few missing GNU programs while installing.
-scriptversion=2003-09-02.23
+scriptversion=2006-05-10.23
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006
# Free Software Foundation, Inc.
# Originally by Fran,cois Pinard <address@hidden>, 1996.
@@ -19,8 +19,8 @@
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
@@ -33,6 +33,8 @@
fi
run=:
+sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
+sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
# In the cases where this matters, `missing' is being run in the
# srcdir already.
@@ -44,7 +46,7 @@
msg="missing on your system"
-case "$1" in
+case $1 in
--run)
# Try to run requested program, and just exit if it succeeds.
run=
@@ -60,12 +62,7 @@
msg="probably too old"
fi
;;
-esac
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case "$1" in
-
-h|--h|--he|--hel|--help)
echo "\
$0 [OPTION]... PROGRAM [ARGUMENT]...
@@ -82,6 +79,7 @@
aclocal touch file \`aclocal.m4'
autoconf touch file \`configure'
autoheader touch file \`config.h.in'
+ autom4te touch the output file, or create a stub one
automake touch all \`Makefile.in' files
bison create \`y.tab.[ch]', if possible, from existing .[ch]
flex create \`lex.yy.c', if possible, from existing .c
@@ -92,10 +90,12 @@
yacc create \`y.tab.[ch]', if possible, from existing .[ch]
Send bug reports to <address@hidden>."
+ exit $?
;;
-v|--v|--ve|--ver|--vers|--versi|--versio|--version)
echo "missing $scriptversion (GNU Automake)"
+ exit $?
;;
-*)
@@ -104,12 +104,42 @@
exit 1
;;
- aclocal*)
+esac
+
+# Now exit if we have it, but it failed. Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program).
+case $1 in
+ lex|yacc)
+ # Not GNU programs, they don't have --version.
+ ;;
+
+ tar)
+ if test -n "$run"; then
+ echo 1>&2 "ERROR: \`tar' requires --run"
+ exit 1
+ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+ exit 1
+ fi
+ ;;
+
+ *)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
+ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+ # Could not run --version or --help. This is probably someone
+ # running `$TOOL --version' or `$TOOL --help' to check whether
+ # $TOOL exists and not knowing $TOOL uses missing.
+ exit 1
fi
+ ;;
+esac
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case $1 in
+ aclocal*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified \`acinclude.m4' or \`${configure_ac}'. You might want
@@ -119,11 +149,6 @@
;;
autoconf)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- fi
-
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified \`${configure_ac}'. You might want to install the
@@ -133,11 +158,6 @@
;;
autoheader)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- fi
-
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified \`acconfig.h' or \`${configure_ac}'. You might want
@@ -147,7 +167,7 @@
test -z "$files" && files="config.h"
touch_files=
for f in $files; do
- case "$f" in
+ case $f in
*:*) touch_files="$touch_files "`echo "$f" |
sed -e 's/^[^:]*://' -e 's/:.*//'`;;
*) touch_files="$touch_files $f.in";;
@@ -157,11 +177,6 @@
;;
automake*)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- fi
-
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
@@ -173,11 +188,6 @@
;;
autom4te)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- fi
-
echo 1>&2 "\
WARNING: \`$1' is needed, but is $msg.
You might have modified some files without having the
@@ -185,8 +195,8 @@
You can get \`$1' as part of \`Autoconf' from any GNU
archive site."
- file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
- test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
if test -f "$file"; then
touch $file
else
@@ -207,25 +217,25 @@
in order for those modifications to take effect. You can get
\`Bison' from any GNU archive site."
rm -f y.tab.c y.tab.h
- if [ $# -ne 1 ]; then
+ if test $# -ne 1; then
eval LASTARG="\${$#}"
- case "$LASTARG" in
+ case $LASTARG in
*.y)
SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
- if [ -f "$SRCFILE" ]; then
+ if test -f "$SRCFILE"; then
cp "$SRCFILE" y.tab.c
fi
SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
- if [ -f "$SRCFILE" ]; then
+ if test -f "$SRCFILE"; then
cp "$SRCFILE" y.tab.h
fi
;;
esac
fi
- if [ ! -f y.tab.h ]; then
+ if test ! -f y.tab.h; then
echo >y.tab.h
fi
- if [ ! -f y.tab.c ]; then
+ if test ! -f y.tab.c; then
echo 'main() { return 0; }' >y.tab.c
fi
;;
@@ -237,39 +247,32 @@
in order for those modifications to take effect. You can get
\`Flex' from any GNU archive site."
rm -f lex.yy.c
- if [ $# -ne 1 ]; then
+ if test $# -ne 1; then
eval LASTARG="\${$#}"
- case "$LASTARG" in
+ case $LASTARG in
*.l)
SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
- if [ -f "$SRCFILE" ]; then
+ if test -f "$SRCFILE"; then
cp "$SRCFILE" lex.yy.c
fi
;;
esac
fi
- if [ ! -f lex.yy.c ]; then
+ if test ! -f lex.yy.c; then
echo 'main() { return 0; }' >lex.yy.c
fi
;;
help2man)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- fi
-
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified a dependency of a manual page. You may need the
\`Help2man' package in order for those modifications to take
effect. You can get \`Help2man' from any GNU archive site."
- file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
- if test -z "$file"; then
- file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
- fi
- if [ -f "$file" ]; then
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -f "$file"; then
touch $file
else
test -z "$file" || exec >$file
@@ -279,11 +282,6 @@
;;
makeinfo)
- if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
- # We have makeinfo, but it failed.
- exit 1
- fi
-
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified a \`.texi' or \`.texinfo' file, or any other file
@@ -291,20 +289,29 @@
call might also be the consequence of using a buggy \`make' (AIX,
DU, IRIX). You might want to install the \`Texinfo' package or
the \`GNU make' package. Grab either from any GNU archive site."
- file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+ # The file to touch is that specified with -o ...
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
if test -z "$file"; then
- file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
- file=`sed -n '/address@hidden/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
+ # ... or it is the one specified with @setfilename ...
+ infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+ file=`sed -n '
+ /address@hidden/{
+ s/.* \([^ ]*\) *$/\1/
+ p
+ q
+ }' $infile`
+ # ... or it is derived from the source name (dir/f.texi becomes f.info)
+ test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
fi
+ # If the file does not exist, the user really needs makeinfo;
+ # let's fail without touching anything.
+ test -f $file || exit 1
touch $file
;;
tar)
shift
- if test -n "$run"; then
- echo 1>&2 "ERROR: \`tar' requires --run"
- exit 1
- fi
# We have already tried tar in the generic part.
# Look for gnutar/gtar before invocation to avoid ugly error
@@ -317,13 +324,13 @@
fi
firstarg="$1"
if shift; then
- case "$firstarg" in
+ case $firstarg in
*o*)
firstarg=`echo "$firstarg" | sed s/o//`
tar "$firstarg" "$@" && exit 0
;;
esac
- case "$firstarg" in
+ case $firstarg in
*h*)
firstarg=`echo "$firstarg" | sed s/h//`
tar "$firstarg" "$@" && exit 0
Modified: GNUnet/m4/Makefile.in
===================================================================
--- GNUnet/m4/Makefile.in 2007-09-30 03:31:18 UTC (rev 5678)
+++ GNUnet/m4/Makefile.in 2007-09-30 04:13:53 UTC (rev 5679)
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.8.5 from Makefile.am.
+# Makefile.in generated by automake 1.10 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -13,15 +13,11 @@
# PARTICULAR PURPOSE.
@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
@@ -33,6 +29,7 @@
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
+build_triplet = @build@
host_triplet = @host@
subdir = m4
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ChangeLog
@@ -54,8 +51,6 @@
DIST_SOURCES =
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AR = @AR@
AS = @AS@
@@ -66,8 +61,6 @@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
-CONVENIENCE_LTDL_FALSE = @CONVENIENCE_LTDL_FALSE@
-CONVENIENCE_LTDL_TRUE = @CONVENIENCE_LTDL_TRUE@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
@@ -75,8 +68,6 @@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
-CYGWIN_FALSE = @CYGWIN_FALSE@
-CYGWIN_TRUE = @CYGWIN_TRUE@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
@@ -96,31 +87,8 @@
GREP = @GREP@
GTK_CFLAGS = @GTK_CFLAGS@
GTK_LIBS = @GTK_LIBS@
-HAVE_ADNS_FALSE = @HAVE_ADNS_FALSE@
-HAVE_ADNS_TRUE = @HAVE_ADNS_TRUE@
-HAVE_DIALOG_FALSE = @HAVE_DIALOG_FALSE@
-HAVE_DIALOG_TRUE = @HAVE_DIALOG_TRUE@
-HAVE_GTK_FALSE = @HAVE_GTK_FALSE@
-HAVE_GTK_TRUE = @HAVE_GTK_TRUE@
-HAVE_GUILE_FALSE = @HAVE_GUILE_FALSE@
-HAVE_GUILE_TRUE = @HAVE_GUILE_TRUE@
-HAVE_IPV6_FALSE = @HAVE_IPV6_FALSE@
-HAVE_IPV6_TRUE = @HAVE_IPV6_TRUE@
-HAVE_MHD_FALSE = @HAVE_MHD_FALSE@
-HAVE_MHD_TRUE = @HAVE_MHD_TRUE@
-HAVE_MYSQLE_FALSE = @HAVE_MYSQLE_FALSE@
-HAVE_MYSQLE_TRUE = @HAVE_MYSQLE_TRUE@
-HAVE_MYSQL_FALSE = @HAVE_MYSQL_FALSE@
-HAVE_MYSQL_TRUE = @HAVE_MYSQL_TRUE@
-HAVE_SQLITE_FALSE = @HAVE_SQLITE_FALSE@
-HAVE_SQLITE_TRUE = @HAVE_SQLITE_TRUE@
-HAVE_XML2_FALSE = @HAVE_XML2_FALSE@
-HAVE_XML2_TRUE = @HAVE_XML2_TRUE@
-HAVE_ZLIB_FALSE = @HAVE_ZLIB_FALSE@
-HAVE_ZLIB_TRUE = @HAVE_ZLIB_TRUE@
+INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
-INSTALL_LTDL_FALSE = @INSTALL_LTDL_FALSE@
-INSTALL_LTDL_TRUE = @INSTALL_LTDL_TRUE@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
@@ -138,18 +106,12 @@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
-LINUX_FALSE = @LINUX_FALSE@
-LINUX_TRUE = @LINUX_TRUE@
LN_S = @LN_S@
LTDLINCL = @LTDLINCL@
LTLIBICONV = @LTLIBICONV@
LTLIBINTL = @LTLIBINTL@
LTLIBOBJS = @LTLIBOBJS@
-MACOSX_FALSE = @MACOSX_FALSE@
-MACOSX_TRUE = @MACOSX_TRUE@
MAKEINFO = @MAKEINFO@
-MINGW_FALSE = @MINGW_FALSE@
-MINGW_TRUE = @MINGW_TRUE@
MKDIR_P = @MKDIR_P@
MKINSTALLDIRS = @MKINSTALLDIRS@
MSGFMT = @MSGFMT@
@@ -158,8 +120,6 @@
MYSQL_LDFLAGS = @MYSQL_LDFLAGS@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
-OPENBSD_FALSE = @OPENBSD_FALSE@
-OPENBSD_TRUE = @OPENBSD_TRUE@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
@@ -170,39 +130,37 @@
PKG_CONFIG = @PKG_CONFIG@
POSUB = @POSUB@
RANLIB = @RANLIB@
-SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
-SOLARIS_FALSE = @SOLARIS_FALSE@
-SOLARIS_TRUE = @SOLARIS_TRUE@
SQLITE_CPPFLAGS = @SQLITE_CPPFLAGS@
SQLITE_LDFLAGS = @SQLITE_LDFLAGS@
STRIP = @STRIP@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
-XFREEBSD_FALSE = @XFREEBSD_FALSE@
-XFREEBSD_TRUE = @XFREEBSD_TRUE@
XGETTEXT = @XGETTEXT@
XML2_CONFIG = @XML2_CONFIG@
XML_CPPFLAGS = @XML_CPPFLAGS@
XML_LIBS = @XML_LIBS@
_libcurl_config = @_libcurl_config@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_F77 = @ac_ct_F77@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
+builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
@@ -230,9 +188,12 @@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
subdirs = @subdirs@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
EXTRA_DIST = glibc2.m4 intl.m4 intldir.m4 lock.m4 visibility.m4 \
codeset.m4 \
freetype2.m4\
@@ -308,10 +269,6 @@
clean-libtool:
-rm -rf .libs _libs
-
-distclean-libtool:
- -rm -f libtool
-uninstall-info-am:
tags: TAGS
TAGS:
@@ -320,22 +277,21 @@
distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
- esac; \
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkdir_p) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
@@ -369,7 +325,7 @@
clean-generic:
distclean-generic:
- -rm -f $(CONFIG_CLEAN_FILES)
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@@ -380,7 +336,7 @@
distclean: distclean-am
-rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-libtool
+distclean-am: clean-am distclean-generic
dvi: dvi-am
@@ -394,12 +350,20 @@
install-data-am:
+install-dvi: install-dvi-am
+
install-exec-am:
+install-html: install-html-am
+
install-info: install-info-am
install-man:
+install-pdf: install-pdf-am
+
+install-ps: install-ps-am
+
installcheck-am:
maintainer-clean: maintainer-clean-am
@@ -418,17 +382,20 @@
ps-am:
-uninstall-am: uninstall-info-am
+uninstall-am:
+.MAKE: install-am install-strip
+
.PHONY: all all-am check check-am clean clean-generic clean-libtool \
distclean distclean-generic distclean-libtool distdir dvi \
dvi-am html html-am info info-am install install-am \
- install-data install-data-am install-exec install-exec-am \
- install-info install-info-am install-man install-strip \
+ install-data install-data-am install-dvi install-dvi-am \
+ install-exec install-exec-am install-html install-html-am \
+ install-info install-info-am install-man install-pdf \
+ install-pdf-am install-ps install-ps-am install-strip \
installcheck installcheck-am installdirs maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
- uninstall-info-am
+ mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [GNUnet-SVN] r5679 - in GNUnet: . libltdl m4,
gnunet <=