[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[GNUnet-SVN] r5656 - in GNUnet: . m4 src/applications/advertising src/ap
From: |
gnunet |
Subject: |
[GNUnet-SVN] r5656 - in GNUnet: . m4 src/applications/advertising src/applications/session src/applications/tbench src/util/os |
Date: |
Mon, 24 Sep 2007 04:17:22 -0600 (MDT) |
Author: grothoff
Date: 2007-09-24 04:17:22 -0600 (Mon, 24 Sep 2007)
New Revision: 5656
Removed:
GNUnet/libltdl/
GNUnet/m4/mkdir.m4
GNUnet/m4/mkdirp.m4
Modified:
GNUnet/INSTALL
GNUnet/Makefile.am
GNUnet/bootstrap
GNUnet/configure.ac
GNUnet/m4/Makefile.am
GNUnet/m4/Makefile.in
GNUnet/src/applications/advertising/Makefile.am
GNUnet/src/applications/advertising/advertising_test.c
GNUnet/src/applications/session/Makefile.am
GNUnet/src/applications/session/http-peer.conf
GNUnet/src/applications/session/nat-http-peer.conf
GNUnet/src/applications/session/sessiontest.c
GNUnet/src/applications/tbench/Makefile.am
GNUnet/src/applications/tbench/tbenchtest.c
GNUnet/src/util/os/statuscallstest.c
GNUnet/todo
Log:
fixing Mantis 1276
Modified: GNUnet/INSTALL
===================================================================
--- GNUnet/INSTALL 2007-09-23 10:31:02 UTC (rev 5655)
+++ GNUnet/INSTALL 2007-09-24 10:17:22 UTC (rev 5656)
@@ -1,13 +1,19 @@
-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software
-Foundation, Inc.
+Installation Instructions
+*************************
- This file is free documentation; the Free Software Foundation gives
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
+2006 Free Software Foundation, Inc.
+
+This file is free documentation; the Free Software Foundation gives
unlimited permission to copy, distribute and modify it.
Basic Installation
==================
- These are generic installation instructions.
+Briefly, the shell commands `./configure; make; make install' should
+configure, build, and install this package. The following
+more-detailed instructions are generic; see the `README' file for
+instructions specific to this package.
The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
@@ -20,9 +26,9 @@
It can also use an optional file (typically called `config.cache'
and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring. (Caching is
+the results of its tests to speed up reconfiguring. Caching is
disabled by default to prevent problems with accidental use of stale
-cache files.)
+cache files.
If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
@@ -32,20 +38,17 @@
may remove or edit it.
The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'. You only need
-`configure.ac' if you want to change it or regenerate `configure' using
-a newer version of `autoconf'.
+`configure' by a program called `autoconf'. You need `configure.ac' if
+you want to change it or regenerate `configure' using a newer version
+of `autoconf'.
The simplest way to compile this package is:
1. `cd' to the directory containing the package's source code and type
- `./configure' to configure the package for your system. If you're
- using `csh' on an old version of System V, you might need to type
- `sh ./configure' instead to prevent `csh' from trying to execute
- `configure' itself.
+ `./configure' to configure the package for your system.
- Running `configure' takes awhile. While running, it prints some
- messages telling which features it is checking for.
+ Running `configure' might take a while. While running, it prints
+ some messages telling which features it is checking for.
2. Type `make' to compile the package.
@@ -67,51 +70,49 @@
Compilers and Options
=====================
- Some systems require unusual options for compilation or linking that
-the `configure' script does not know about. Run `./configure --help'
-for details on some of the pertinent environment variables.
+Some systems require unusual options for compilation or linking that the
+`configure' script does not know about. Run `./configure --help' for
+details on some of the pertinent environment variables.
You can give `configure' initial values for configuration parameters
by setting variables in the command line or in the environment. Here
is an example:
- ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
+ ./configure CC=c99 CFLAGS=-g LIBS=-lposix
*Note Defining Variables::, for more details.
Compiling For Multiple Architectures
====================================
- You can compile the package for more than one kind of computer at the
+You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
-own directory. To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'. `cd' to the
+own directory. To do this, you can use GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'.
- If you have to use a `make' that does not support the `VPATH'
-variable, you have to compile the package for one architecture at a
-time in the source code directory. After you have installed the
-package for one architecture, use `make distclean' before reconfiguring
-for another architecture.
+ With a non-GNU `make', it is safer to compile the package for one
+architecture at a time in the source code directory. After you have
+installed the package for one architecture, use `make distclean' before
+reconfiguring for another architecture.
Installation Names
==================
- By default, `make install' will install the package's files in
-`/usr/local/bin', `/usr/local/man', etc. You can specify an
-installation prefix other than `/usr/local' by giving `configure' the
-option `--prefix=PATH'.
+By default, `make install' installs the package's commands under
+`/usr/local/bin', include files under `/usr/local/include', etc. You
+can specify an installation prefix other than `/usr/local' by giving
+`configure' the option `--prefix=PREFIX'.
You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
-give `configure' the option `--exec-prefix=PATH', the package will use
-PATH as the prefix for installing programs and libraries.
-Documentation and other data files will still use the regular prefix.
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files still use the regular prefix.
In addition, if you use an unusual directory layout you can give
-options like `--bindir=PATH' to specify different values for particular
+options like `--bindir=DIR' to specify different values for particular
kinds of files. Run `configure --help' for a list of the directories
you can set and what kinds of files go in them.
@@ -122,7 +123,7 @@
Optional Features
=================
- Some packages pay attention to `--enable-FEATURE' options to
+Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
is something like `gnu-as' or `x' (for the X Window System). The
@@ -137,11 +138,11 @@
Specifying the System Type
==========================
- There may be some features `configure' cannot figure out
-automatically, but needs to determine by the type of machine the package
-will run on. Usually, assuming the package is built to be run on the
-_same_ architectures, `configure' can figure that out, but if it prints
-a message saying it cannot guess the machine type, give it the
+There may be some features `configure' cannot figure out automatically,
+but needs to determine by the type of machine the package will run on.
+Usually, assuming the package is built to be run on the _same_
+architectures, `configure' can figure that out, but if it prints a
+message saying it cannot guess the machine type, give it the
`--build=TYPE' option. TYPE can either be a short name for the system
type, such as `sun4', or a canonical name which has the form:
@@ -156,7 +157,7 @@
need to know the machine type.
If you are _building_ compiler tools for cross-compiling, you should
-use the `--target=TYPE' option to select the type of system they will
+use the option `--target=TYPE' to select the type of system they will
produce code for.
If you want to _use_ a cross compiler, that generates code for a
@@ -167,9 +168,9 @@
Sharing Defaults
================
- If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
+If you want to set default values for `configure' scripts to share, you
+can create a site shell script called `config.site' that gives default
+values for variables like `CC', `cache_file', and `prefix'.
`configure' looks for `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists. Or, you can set the
`CONFIG_SITE' environment variable to the location of the site script.
@@ -178,7 +179,7 @@
Defining Variables
==================
- Variables not defined in a site shell script can be set in the
+Variables not defined in a site shell script can be set in the
environment passed to `configure'. However, some packages may run
configure again during the build, and the customized values of these
variables may be lost. In order to avoid this problem, you should set
@@ -186,14 +187,18 @@
./configure CC=/usr/local2/bin/gcc
-will cause the specified gcc to be used as the C compiler (unless it is
+causes the specified `gcc' to be used as the C compiler (unless it is
overridden in the site shell script).
+Unfortunately, this technique does not work for `CONFIG_SHELL' due to
+an Autoconf bug. Until the bug is fixed you can use this workaround:
+
+ CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
+
`configure' Invocation
======================
- `configure' recognizes the following options to control how it
-operates.
+`configure' recognizes the following options to control how it operates.
`--help'
`-h'
Modified: GNUnet/Makefile.am
===================================================================
--- GNUnet/Makefile.am 2007-09-23 10:31:02 UTC (rev 5655)
+++ GNUnet/Makefile.am 2007-09-24 10:17:22 UTC (rev 5656)
@@ -1,5 +1,5 @@
INCLUDES = -I$(top_srcdir)/src/include
-SUBDIRS = m4 po libltdl src doc contrib
+SUBDIRS = m4 po src doc contrib
EXTRA_DIST = \
ABOUT-NLS \
Modified: GNUnet/bootstrap
===================================================================
--- GNUnet/bootstrap 2007-09-23 10:31:02 UTC (rev 5655)
+++ GNUnet/bootstrap 2007-09-24 10:17:22 UTC (rev 5656)
@@ -1,27 +1,4 @@
#!/bin/sh
-export WANT_AUTOMAKE="1.8"
-export MKDIR_P="mkdir -p"
-
-if test "$(which automake-1.8)" != ""; then
- export AUTOMAKE="automake-1.8"
-elif test "$(which automake)" != ""; then
- export AUTOMAKE="automake"
-else
- echo "Error: automake not found"
- exit
-fi
-
-if test "$(which aclocal-1.8)" != ""; then
- export ACLOCAL="aclocal-1.8"
-elif test "$(which aclocal)" != ""; then
- export ACLOCAL="aclocal"
-else
- echo "Error: aclocal not found"
- exit
-fi
-
-$AUTOMAKE -fi
-cd libltdl
+aclocal
+automake
autoreconf -f -i
-cd ..
-autoreconf -f -i
Modified: GNUnet/configure.ac
===================================================================
--- GNUnet/configure.ac 2007-09-23 10:31:02 UTC (rev 5655)
+++ GNUnet/configure.ac 2007-09-24 10:17:22 UTC (rev 5656)
@@ -20,10 +20,10 @@
# Process this file with autoconf to produce a configure script.
#
#
-AC_PREREQ(2.57)
+AC_PREREQ(2.61)
AC_INIT([GNUnet], [0.7.2b],address@hidden)
AM_INIT_AUTOMAKE([GNUnet], [0.7.2b])
-AM_CONFIG_HEADER([config.h])
+AC_CONFIG_HEADERS([config.h])
AH_TOP([#define _GNU_SOURCE 1])
@@ -34,20 +34,15 @@
AC_PROG_INSTALL
AC_PROG_LN_S
AC_PROG_MAKE_SET
-AC_PROG_MKDIR_P
-AC_LIBTOOL_WIN32_DLL
-AC_CANONICAL_HOST
-
-
-# dynamic libraries/plugins
AC_LIBTOOL_DLOPEN
-AC_LIBLTDL_INSTALLABLE
AC_SUBST(LTDLINCL)
AC_SUBST(LIBLTDL)
+AC_SUBST(MKDIR_P)
AC_DISABLE_STATIC
+AC_LIBTOOL_WIN32_DLL
AC_PROG_LIBTOOL
+AC_CANONICAL_HOST
AC_LIB_LTDL
-AC_CONFIG_SUBDIRS(libltdl)
# large file support
AC_SYS_LARGEFILE
@@ -507,7 +502,7 @@
AC_CHECK_HEADERS([fcntl.h math.h errno.h limits.h stdio.h locale.h sys/stat.h
sys/types.h pthread.h],,AC_MSG_ERROR([Compiling GNUnet requires standard UNIX
headers files]))
# Checks for headers that are only required on some systems or opional (and
where we do NOT abort if they are not there)
-AC_CHECK_HEADERS([langinfo.h sys/param.h sys/mount.h sys/statvfs.h sys/vfs.h
arpa/inet.h fcntl.h libintl.h netdb.h netinet/in.h sys/ioctl.h sys/socket.h
sys/time.h unistd.h kstat.h sys/sysinfo.h kvm.h sys/file.h sys/resource.h
iconv.h ifaddrs.h])
+AC_CHECK_HEADERS([langinfo.h sys/param.h sys/mount.h sys/statvfs.h sys/vfs.h
arpa/inet.h fcntl.h libintl.h netdb.h netinet/in.h sys/ioctl.h sys/socket.h
sys/time.h unistd.h kstat.h sys/sysinfo.h kvm.h sys/file.h sys/resource.h
iconv.h ifaddrs.h mach/mach.h stddef.h sys/timeb.h terminos.h])
# Check for GMP header (and abort if not present)
AC_CHECK_HEADERS([gmp.h],,AC_MSG_ERROR([Compiling GNUnet requires gmp.h (from
the GNU MP library, libgmp)]))
@@ -517,7 +512,10 @@
AC_C_CONST
AC_TYPE_PID_T
AC_TYPE_SIZE_T
+AC_TYPE_MODE_T
AC_HEADER_TIME
+AC_HEADER_STAT
+AC_HEADER_STDBOOL
AC_STRUCT_TM
@@ -529,6 +527,8 @@
AC_PROG_GCC_TRADITIONAL
AC_FUNC_MEMCMP
AC_FUNC_SELECT_ARGTYPES
+AC_FUNC_CHOWN
+
AC_TYPE_SIGNAL
AC_FUNC_STAT
AC_FUNC_STRFTIME
@@ -536,7 +536,7 @@
AC_HEADER_SYS_WAIT
AC_TYPE_OFF_T
AC_TYPE_UID_T
-AC_CHECK_FUNCS([floor gethostname memmove rmdir strncasecmp strrchr strtol
atoll dup2 fdatasync ftruncate gethostbyname gettimeofday memset mkdir mkfifo
select socket strcasecmp strchr strdup strerror strstr clock_gettime getrusage
rand uname setlocale getcwd mktime gmtime_r gmtime strlcpy strlcat ftruncate
stat64 sbrk mmap mremap setrlimit gethostbyaddr initgroups getifaddrs
freeifaddrs getnameinfo])
+AC_CHECK_FUNCS([floor gethostname memmove rmdir strncasecmp strrchr strtol
atoll dup2 fdatasync ftruncate gethostbyname gettimeofday memset mkdir mkfifo
select socket strcasecmp strchr strdup strerror strstr clock_gettime getrusage
rand uname setlocale getcwd mktime gmtime_r gmtime strlcpy strlcat ftruncate
stat64 sbrk mmap mremap setrlimit gethostbyaddr initgroups getifaddrs
freeifaddrs getnameinfo inet_ntoa localtime_r nl_langinfo putenv realpath
strndup])
# restore LIBS
LIBS=$SAVE_LIBS
@@ -577,14 +577,14 @@
;;
yes)
AC_CHECK_HEADERS(libguile.h,
- AC_CHECK_LIB([guile], [scm_sigaction_for_thread],
+ AC_CHECK_LIB([guile], [scm_c_define_gsubr],
guile=1))
;;
*)
LDFLAGS="-L$with_guile/lib $LDFLAGS"
CPPFLAGS="-I$with_guile/include $CPPFLAGS"
AC_CHECK_HEADERS(libguile.h,
- AC_CHECK_LIB([guile], [scm_sigaction_for_thread],
+ AC_CHECK_LIB([guile], [scm_c_define_gsubr],
EXT_LIB_PATH="-L$with_guile/lib $EXT_LIB_PATH"
guile=1))
;;
@@ -592,7 +592,7 @@
],
[AC_MSG_RESULT([--with-guile not specified])
AC_CHECK_HEADERS(libguile.h,
- AC_CHECK_LIB([guile], [scm_sigaction_for_thread],
+ AC_CHECK_LIB([guile], [scm_c_define_gsubr],
guile=1))])
if test "$guile" = 1
Modified: GNUnet/m4/Makefile.am
===================================================================
--- GNUnet/m4/Makefile.am 2007-09-23 10:31:02 UTC (rev 5655)
+++ GNUnet/m4/Makefile.am 2007-09-24 10:17:22 UTC (rev 5656)
@@ -21,8 +21,6 @@
libxml2.m4\
longdouble.m4\
longlong.m4\
-mkdir.m4\
-mkdirp.m4\
nls.m4\
pkg.m4\
po.m4\
Modified: GNUnet/m4/Makefile.in
===================================================================
--- GNUnet/m4/Makefile.in 2007-09-23 10:31:02 UTC (rev 5655)
+++ GNUnet/m4/Makefile.in 2007-09-24 10:17:22 UTC (rev 5656)
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.8.5 from Makefile.am.
+# Makefile.in generated by automake 1.10 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -13,15 +13,11 @@
# PARTICULAR PURPOSE.
@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
@@ -33,6 +29,7 @@
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
+build_triplet = @build@
host_triplet = @host@
subdir = m4
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ChangeLog
@@ -42,7 +39,6 @@
$(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
$(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libcurl.m4 \
$(top_srcdir)/m4/libgcrypt.m4 $(top_srcdir)/m4/libxml2.m4 \
- $(top_srcdir)/m4/mkdir.m4 $(top_srcdir)/m4/mkdirp.m4 \
$(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/pkg.m4 \
$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac
@@ -55,8 +51,6 @@
DIST_SOURCES =
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AR = @AR@
AS = @AS@
@@ -67,8 +61,6 @@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
-CONVENIENCE_LTDL_FALSE = @CONVENIENCE_LTDL_FALSE@
-CONVENIENCE_LTDL_TRUE = @CONVENIENCE_LTDL_TRUE@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
@@ -76,8 +68,6 @@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
-CYGWIN_FALSE = @CYGWIN_FALSE@
-CYGWIN_TRUE = @CYGWIN_TRUE@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
@@ -97,31 +87,8 @@
GREP = @GREP@
GTK_CFLAGS = @GTK_CFLAGS@
GTK_LIBS = @GTK_LIBS@
-HAVE_ADNS_FALSE = @HAVE_ADNS_FALSE@
-HAVE_ADNS_TRUE = @HAVE_ADNS_TRUE@
-HAVE_DIALOG_FALSE = @HAVE_DIALOG_FALSE@
-HAVE_DIALOG_TRUE = @HAVE_DIALOG_TRUE@
-HAVE_GTK_FALSE = @HAVE_GTK_FALSE@
-HAVE_GTK_TRUE = @HAVE_GTK_TRUE@
-HAVE_GUILE_FALSE = @HAVE_GUILE_FALSE@
-HAVE_GUILE_TRUE = @HAVE_GUILE_TRUE@
-HAVE_IPV6_FALSE = @HAVE_IPV6_FALSE@
-HAVE_IPV6_TRUE = @HAVE_IPV6_TRUE@
-HAVE_MHD_FALSE = @HAVE_MHD_FALSE@
-HAVE_MHD_TRUE = @HAVE_MHD_TRUE@
-HAVE_MYSQLE_FALSE = @HAVE_MYSQLE_FALSE@
-HAVE_MYSQLE_TRUE = @HAVE_MYSQLE_TRUE@
-HAVE_MYSQL_FALSE = @HAVE_MYSQL_FALSE@
-HAVE_MYSQL_TRUE = @HAVE_MYSQL_TRUE@
-HAVE_SQLITE_FALSE = @HAVE_SQLITE_FALSE@
-HAVE_SQLITE_TRUE = @HAVE_SQLITE_TRUE@
-HAVE_XML2_FALSE = @HAVE_XML2_FALSE@
-HAVE_XML2_TRUE = @HAVE_XML2_TRUE@
-HAVE_ZLIB_FALSE = @HAVE_ZLIB_FALSE@
-HAVE_ZLIB_TRUE = @HAVE_ZLIB_TRUE@
+INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
-INSTALL_LTDL_FALSE = @INSTALL_LTDL_FALSE@
-INSTALL_LTDL_TRUE = @INSTALL_LTDL_TRUE@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
@@ -139,18 +106,13 @@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
-LINUX_FALSE = @LINUX_FALSE@
-LINUX_TRUE = @LINUX_TRUE@
LN_S = @LN_S@
LTDLINCL = @LTDLINCL@
LTLIBICONV = @LTLIBICONV@
LTLIBINTL = @LTLIBINTL@
LTLIBOBJS = @LTLIBOBJS@
-MACOSX_FALSE = @MACOSX_FALSE@
-MACOSX_TRUE = @MACOSX_TRUE@
MAKEINFO = @MAKEINFO@
-MINGW_FALSE = @MINGW_FALSE@
-MINGW_TRUE = @MINGW_TRUE@
+MKDIR_P = @MKDIR_P@
MKINSTALLDIRS = @MKINSTALLDIRS@
MSGFMT = @MSGFMT@
MSGMERGE = @MSGMERGE@
@@ -158,8 +120,6 @@
MYSQL_LDFLAGS = @MYSQL_LDFLAGS@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
-OPENBSD_FALSE = @OPENBSD_FALSE@
-OPENBSD_TRUE = @OPENBSD_TRUE@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
@@ -172,36 +132,35 @@
RANLIB = @RANLIB@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
-SOLARIS_FALSE = @SOLARIS_FALSE@
-SOLARIS_TRUE = @SOLARIS_TRUE@
SQLITE_CPPFLAGS = @SQLITE_CPPFLAGS@
SQLITE_LDFLAGS = @SQLITE_LDFLAGS@
STRIP = @STRIP@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
-XFREEBSD_FALSE = @XFREEBSD_FALSE@
-XFREEBSD_TRUE = @XFREEBSD_TRUE@
XGETTEXT = @XGETTEXT@
XML2_CONFIG = @XML2_CONFIG@
XML_CPPFLAGS = @XML_CPPFLAGS@
XML_LIBS = @XML_LIBS@
_libcurl_config = @_libcurl_config@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_F77 = @ac_ct_F77@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
+builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
@@ -229,9 +188,11 @@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
-subdirs = @subdirs@
+srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
EXTRA_DIST = glibc2.m4 intl.m4 intldir.m4 lock.m4 visibility.m4 \
codeset.m4 \
freetype2.m4\
@@ -255,8 +216,6 @@
libxml2.m4\
longdouble.m4\
longlong.m4\
-mkdir.m4\
-mkdirp.m4\
nls.m4\
pkg.m4\
po.m4\
@@ -309,10 +268,6 @@
clean-libtool:
-rm -rf .libs _libs
-
-distclean-libtool:
- -rm -f libtool
-uninstall-info-am:
tags: TAGS
TAGS:
@@ -321,22 +276,21 @@
distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
- esac; \
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkdir_p) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
@@ -370,7 +324,7 @@
clean-generic:
distclean-generic:
- -rm -f $(CONFIG_CLEAN_FILES)
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@@ -381,7 +335,7 @@
distclean: distclean-am
-rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-libtool
+distclean-am: clean-am distclean-generic
dvi: dvi-am
@@ -395,12 +349,20 @@
install-data-am:
+install-dvi: install-dvi-am
+
install-exec-am:
+install-html: install-html-am
+
install-info: install-info-am
install-man:
+install-pdf: install-pdf-am
+
+install-ps: install-ps-am
+
installcheck-am:
maintainer-clean: maintainer-clean-am
@@ -419,17 +381,20 @@
ps-am:
-uninstall-am: uninstall-info-am
+uninstall-am:
+.MAKE: install-am install-strip
+
.PHONY: all all-am check check-am clean clean-generic clean-libtool \
distclean distclean-generic distclean-libtool distdir dvi \
dvi-am html html-am info info-am install install-am \
- install-data install-data-am install-exec install-exec-am \
- install-info install-info-am install-man install-strip \
+ install-data install-data-am install-dvi install-dvi-am \
+ install-exec install-exec-am install-html install-html-am \
+ install-info install-info-am install-man install-pdf \
+ install-pdf-am install-ps install-ps-am install-strip \
installcheck installcheck-am installdirs maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
- uninstall-info-am
+ mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
Deleted: GNUnet/m4/mkdir.m4
===================================================================
--- GNUnet/m4/mkdir.m4 2007-09-23 10:31:02 UTC (rev 5655)
+++ GNUnet/m4/mkdir.m4 2007-09-24 10:17:22 UTC (rev 5656)
@@ -1,73 +0,0 @@
-# AM_PROG_MKDIR_P
-# ---------------
-# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise.
-
-# Copyright (C) 2003, 2004 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
-# created by `make install' are always world readable, even if the
-# installer happens to have an overly restrictive umask (e.g. 077).
-# This was a mistake. There are at least two reasons why we must not
-# use `-m 0755':
-# - it causes special bits like SGID to be ignored,
-# - it may be too restrictive (some setups expect 775 directories).
-#
-# Do not use -m 0755 and let people choose whatever they expect by
-# setting umask.
-#
-# We cannot accept any implementation of `mkdir' that recognizes `-p'.
-# Some implementations (such as Solaris 8's) are not thread-safe: if a
-# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c'
-# concurrently, both version can detect that a/ is missing, but only
-# one can create it and the other will error out. Consequently we
-# restrict ourselves to GNU make (using the --version option ensures
-# this.)
-AC_DEFUN([AM_PROG_MKDIR_P],
-[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
- # We used to keeping the `.' as first argument, in order to
- # allow $(mkdir_p) to be used without argument. As in
- # $(mkdir_p) $(somedir)
- # where $(somedir) is conditionally defined. However this is wrong
- # for two reasons:
- # 1. if the package is installed by a user who cannot write `.'
- # make install will fail,
- # 2. the above comment should most certainly read
- # $(mkdir_p) $(DESTDIR)$(somedir)
- # so it does not work when $(somedir) is undefined and
- # $(DESTDIR) is not.
- # To support the latter case, we have to write
- # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
- # so the `.' trick is pointless.
- mkdir_p='mkdir -p --'
-else
- # On NextStep and OpenStep, the `mkdir' command does not
- # recognize any option. It will interpret all options as
- # directories to create, and then abort because `.' already
- # exists.
- for d in ./-p ./--version;
- do
- test -d $d && rmdir $d
- done
- # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
- if test -f "$ac_aux_dir/mkinstalldirs"; then
- mkdir_p='$(mkinstalldirs)'
- else
- mkdir_p='$(install_sh) -d'
- fi
-fi
-AC_SUBST([mkdir_p])])
Deleted: GNUnet/m4/mkdirp.m4
===================================================================
--- GNUnet/m4/mkdirp.m4 2007-09-23 10:31:02 UTC (rev 5655)
+++ GNUnet/m4/mkdirp.m4 2007-09-24 10:17:22 UTC (rev 5656)
@@ -1,63 +0,0 @@
-## -*- Autoconf -*-
-# Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AC_PROG_MKDIR_P
-# ---------------
-# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise.
-#
-# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
-# created by `make install' are always world readable, even if the
-# installer happens to have an overly restrictive umask (e.g. 077).
-# This was a mistake. There are at least two reasons why we must not
-# use `-m 0755':
-# - it causes special bits like SGID to be ignored,
-# - it may be too restrictive (some setups expect 775 directories).
-#
-# Do not use -m 0755 and let people choose whatever they expect by
-# setting umask.
-#
-# We cannot accept any implementation of `mkdir' that recognizes `-p'.
-# Some implementations (such as Solaris 8's) are not thread-safe: if a
-# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c'
-# concurrently, both version can detect that a/ is missing, but only
-# one can create it and the other will error out. Consequently we
-# restrict ourselves to GNU make (using the --version option ensures
-# this.)
-AC_DEFUN([AC_PROG_MKDIR_P],
-[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
- # We used to keeping the `.' as first argument, in order to
- # allow $(mkdir_p) to be used without argument. As in
- # $(mkdir_p) $(somedir)
- # where $(somedir) is conditionally defined. However this is wrong
- # for two reasons:
- # 1. if the package is installed by a user who cannot write `.'
- # make install will fail,
- # 2. the above comment should most certainly read
- # $(mkdir_p) $(DESTDIR)$(somedir)
- # so it does not work when $(somedir) is undefined and
- # $(DESTDIR) is not.
- # To support the latter case, we have to write
- # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
- # so the `.' trick is pointless.
- mkdir_p='mkdir -p --'
-else
- # On NextStep and OpenStep, the `mkdir' command does not
- # recognize any option. It will interpret all options as
- # directories to create, and then abort because `.' already
- # exists.
- for d in ./-p ./--version;
- do
- test -d $d && rmdir $d
- done
- # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
- if test -f "$ac_aux_dir/mkinstalldirs"; then
- mkdir_p='$(mkinstalldirs)'
- else
- mkdir_p='$(install_sh) -d'
- fi
-fi
-AC_SUBST([mkdir_p])])
Modified: GNUnet/src/applications/advertising/Makefile.am
===================================================================
--- GNUnet/src/applications/advertising/Makefile.am 2007-09-23 10:31:02 UTC
(rev 5655)
+++ GNUnet/src/applications/advertising/Makefile.am 2007-09-24 10:17:22 UTC
(rev 5656)
@@ -16,31 +16,46 @@
libgnunetmodule_advertising_la_LDFLAGS = \
-export-dynamic -avoid-version -module
+
+
+if HAVE_MHD
+ httptest = advertisingtest_http
+endif
+
check_PROGRAMS = \
- advertising_test \
- advertising_test_udp
+ advertisingtest_tcp \
+ advertisingtest_udp $(httptest)
TESTS = $(check_PROGRAMS)
-advertising_test_SOURCES = \
+advertisingtest_tcp_SOURCES = \
advertising_test.c
-advertising_test_LDADD = \
+advertisingtest_tcp_LDADD = \
$(top_builddir)/src/applications/stats/libgnunetstats_api.la \
$(top_builddir)/src/util/network_client/libgnunetutil_network_client.la \
$(top_builddir)/src/applications/testing/libgnunettesting_api.la \
$(top_builddir)/src/util/config_impl/libgnunetutil_config.la \
$(top_builddir)/src/util/libgnunetutil.la
-advertising_test_udp_SOURCES = \
+advertisingtest_udp_SOURCES = \
advertising_test.c
-advertising_test_udp_LDADD = \
+advertisingtest_udp_LDADD = \
$(top_builddir)/src/applications/stats/libgnunetstats_api.la \
$(top_builddir)/src/util/network_client/libgnunetutil_network_client.la \
$(top_builddir)/src/applications/testing/libgnunettesting_api.la \
$(top_builddir)/src/util/config_impl/libgnunetutil_config.la \
$(top_builddir)/src/util/libgnunetutil.la
+advertisingtest_http_SOURCES = \
+ advertising_test.c
+advertisingtest_http_LDADD = \
+ $(top_builddir)/src/applications/stats/libgnunetstats_api.la \
+ $(top_builddir)/src/util/network_client/libgnunetutil_network_client.la \
+ $(top_builddir)/src/applications/testing/libgnunettesting_api.la \
+ $(top_builddir)/src/util/config_impl/libgnunetutil_config.la \
+ $(top_builddir)/src/util/libgnunetutil.la
+
EXTRA_DIST = \
check.conf
Modified: GNUnet/src/applications/advertising/advertising_test.c
===================================================================
--- GNUnet/src/applications/advertising/advertising_test.c 2007-09-23
10:31:02 UTC (rev 5655)
+++ GNUnet/src/applications/advertising/advertising_test.c 2007-09-24
10:17:22 UTC (rev 5656)
@@ -82,7 +82,7 @@
}
peers =
gnunet_testing_start_daemons (NULL ==
- strstr (argv[0], "_udp") ? "tcp" : "udp",
+ strstr (argv[0], "_") + 1,
"advertising stats",
"/tmp/gnunet-advertising-test", 2087, 10,
NUM_PEERS);
Modified: GNUnet/src/applications/session/Makefile.am
===================================================================
--- GNUnet/src/applications/session/Makefile.am 2007-09-23 10:31:02 UTC (rev
5655)
+++ GNUnet/src/applications/session/Makefile.am 2007-09-24 10:17:22 UTC (rev
5656)
@@ -14,7 +14,7 @@
-export-dynamic -avoid-version -module
if HAVE_MHD
- httptest = sessiontest_http
+ httptest = sessiontest_http sessiontest2_http
endif
check_PROGRAMS = \
@@ -42,6 +42,15 @@
$(top_builddir)/src/util/network_client/libgnunetutil_network_client.la \
$(top_builddir)/src/util/libgnunetutil.la
+sessiontest_http_SOURCES = \
+ sessiontest.c
+sessiontest_http_LDADD = \
+ $(top_builddir)/src/applications/stats/libgnunetstats_api.la \
+ $(top_builddir)/src/applications/testing/libgnunettesting_api.la \
+ $(top_builddir)/src/util/config_impl/libgnunetutil_config.la \
+ $(top_builddir)/src/util/network_client/libgnunetutil_network_client.la \
+ $(top_builddir)/src/util/libgnunetutil.la
+
sessiontest2_SOURCES = \
sessiontest2.c
sessiontest2_LDADD = \
@@ -52,9 +61,9 @@
$(top_builddir)/src/util/libgnunetutil.la
-sessiontest_http_SOURCES = \
+sessiontest2_http_SOURCES = \
sessiontest_http.c
-sessiontest_http_LDADD = \
+sessiontest2_http_LDADD = \
$(top_builddir)/src/applications/stats/libgnunetstats_api.la \
$(top_builddir)/src/applications/identity/libgnunetidentity_api.la \
$(top_builddir)/src/util/config_impl/libgnunetutil_config.la \
Modified: GNUnet/src/applications/session/http-peer.conf
===================================================================
--- GNUnet/src/applications/session/http-peer.conf 2007-09-23 10:31:02 UTC
(rev 5655)
+++ GNUnet/src/applications/session/http-peer.conf 2007-09-24 10:17:22 UTC
(rev 5656)
@@ -34,5 +34,4 @@
[HTTP]
PORT = 1080
-UPNP = NO
Modified: GNUnet/src/applications/session/nat-http-peer.conf
===================================================================
--- GNUnet/src/applications/session/nat-http-peer.conf 2007-09-23 10:31:02 UTC
(rev 5655)
+++ GNUnet/src/applications/session/nat-http-peer.conf 2007-09-24 10:17:22 UTC
(rev 5656)
@@ -16,7 +16,6 @@
ADMIN-LEVEL = ERROR
[MODULES]
-sqstore = "sqstore_sqlite"
topology = "topology_default"
[NETWORK]
Modified: GNUnet/src/applications/session/sessiontest.c
===================================================================
--- GNUnet/src/applications/session/sessiontest.c 2007-09-23 10:31:02 UTC
(rev 5655)
+++ GNUnet/src/applications/session/sessiontest.c 2007-09-24 10:17:22 UTC
(rev 5656)
@@ -75,7 +75,7 @@
#if START_PEERS
peers =
gnunet_testing_start_daemons (NULL ==
- strstr (argv[0], "_udp") ? "tcp" : "udp",
+ strstr (argv[0], "_") + 1, /* tcp, udp or
http */
"advertising stats",
"/tmp/gnunet-session-test", 2087, 10000, 2);
if (peers == NULL)
Modified: GNUnet/src/applications/tbench/Makefile.am
===================================================================
--- GNUnet/src/applications/tbench/Makefile.am 2007-09-23 10:31:02 UTC (rev
5655)
+++ GNUnet/src/applications/tbench/Makefile.am 2007-09-24 10:17:22 UTC (rev
5656)
@@ -10,9 +10,11 @@
bin_PROGRAMS = \
gnunet-tbench
+
plugin_LTLIBRARIES = \
libgnunetmodule_tbench.la
+
gnunet_tbench_SOURCES = \
gnunet-tbench.c \
tbench.h
@@ -30,16 +32,19 @@
-export-dynamic -avoid-version -module
+if HAVE_MHD
+ httptest = tbenchtest_http
+endif
check_PROGRAMS = \
- tbenchtest \
- tbenchtest_udp
+ tbenchtest_tcp \
+ tbenchtest_udp $(httptest)
TESTS = $(check_PROGRAMS)
-tbenchtest_SOURCES = \
+tbenchtest_tcp_SOURCES = \
tbenchtest.c
-tbenchtest_LDADD = \
+tbenchtest_tcp_LDADD = \
$(top_builddir)/src/applications/stats/libgnunetstats_api.la \
$(top_builddir)/src/applications/testing/libgnunettesting_api.la \
$(top_builddir)/src/util/network_client/libgnunetutil_network_client.la \
@@ -59,5 +64,16 @@
$(top_builddir)/src/util/config_impl/libgnunetutil_config.la \
$(top_builddir)/src/util/libgnunetutil.la
+tbenchtest_http_SOURCES = \
+ tbenchtest.c
+tbenchtest_http_LDADD = \
+ $(top_builddir)/src/applications/stats/libgnunetstats_api.la \
+ $(top_builddir)/src/applications/testing/libgnunettesting_api.la \
+ $(top_builddir)/src/util/network_client/libgnunetutil_network_client.la \
+ $(top_builddir)/src/util/loggers/libgnunetutil_logging.la \
+ $(top_builddir)/src/util/crypto/libgnunetutil_crypto.la \
+ $(top_builddir)/src/util/config_impl/libgnunetutil_config.la \
+ $(top_builddir)/src/util/libgnunetutil.la
+
EXTRA_DIST = \
check.conf
Modified: GNUnet/src/applications/tbench/tbenchtest.c
===================================================================
--- GNUnet/src/applications/tbench/tbenchtest.c 2007-09-23 10:31:02 UTC (rev
5655)
+++ GNUnet/src/applications/tbench/tbenchtest.c 2007-09-24 10:17:22 UTC (rev
5656)
@@ -129,7 +129,7 @@
#if START_PEERS
peers =
gnunet_testing_start_daemons (NULL ==
- strstr (argv[0], "_udp") ? "tcp" : "udp",
+ strstr (argv[0], "_") + 1,
"advertising tbench topology stats",
"/tmp/gnunet-tbench-test", 2087, 10000, 2);
if (peers == NULL)
Modified: GNUnet/src/util/os/statuscallstest.c
===================================================================
--- GNUnet/src/util/os/statuscallstest.c 2007-09-23 10:31:02 UTC (rev
5655)
+++ GNUnet/src/util/os/statuscallstest.c 2007-09-24 10:17:22 UTC (rev
5656)
@@ -30,6 +30,7 @@
int
main (int argc, char *argv[])
{
+ static long k;
int ret;
cron_t start;
struct GE_Context *ectx;
@@ -51,7 +52,7 @@
start = get_time ();
ret = os_cpu_get_load (ectx, cfg);
while (start + 60 * cronSECONDS > get_time ())
- sqrt (245.2523); /* do some processing to drive load up */
+ k++; /* do some processing to drive load up */
if (ret > os_cpu_get_load (ectx, cfg))
{
printf ("busy loop decreased CPU load: %d < %d.\n",
Modified: GNUnet/todo
===================================================================
--- GNUnet/todo 2007-09-23 10:31:02 UTC (rev 5655)
+++ GNUnet/todo 2007-09-24 10:17:22 UTC (rev 5656)
@@ -4,11 +4,9 @@
RC == Release Critical
0.7.3 [8'07] (aka "features"):
+- http transport needs more testing (still not 100% sure it is working)
+- fix strange crash-bug(s) in gnunetd and gnunet-setup
- chat support basics [RC]
-- old/new features:
- * SMTP transport (libesmtp)
-- Documentation:
- * LJ article
- Testcases:
* more XFS/DHT
* tracekit
@@ -25,6 +23,8 @@
gnunet-insert only if the file is actually needed!)
- guard friendly connection count (#1018) [RC]
- power insert [#854]
+- old/new features:
+ * SMTP transport (libesmtp)
1.0.0 (aka "userfriendly"):
- implement testbed for profiling
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [GNUnet-SVN] r5656 - in GNUnet: . m4 src/applications/advertising src/applications/session src/applications/tbench src/util/os,
gnunet <=