Re: gnokii smsd not giving me a clue as to why it is not sending and receiving sms'

[helpFractal]

Thanks for your response, I think that we are getting there.


Daniele Forsi-2 wrote:
> 
> text mode is different because the SMSC number and other parameters
> are set before using AT+CMGS and in some cases the SMSC number set in
> phone menus is not used by the AT interpreter, use AT+CSCA? to see it
> 

when I use AT+CSCA? (via screen) I get '+CSCA: "+44795887890"' which, after
a google search, is the correct smsc for my sim card. Gnokii also gets this
number after the AT+CSCA?


Daniele Forsi-2 wrote:
> 
> 
> some phones have troubles with the SMSC number; you can check if it's
> your case by changing 0 to 1 in common/phones/atgen.c at line 3242
>       drvinst->no_smsc = 0;
> when set to 1 the phone should use the same number returned by AT+CSCA?
> 
> 

I used mac ports to install gnokii, after modifying the Portfile to
--enable-smsd, so I had to create a patchfile to change this from a 0 to 1,
uninstall and re-install. I think that I did it right, well it is doing
something different....

imac:~ fractal$ echo "This is a test message" | sudo gnokii --sendsms
+447721234567
GNOKII Version 0.6.31
LOG: debug mask is 0x1
LOG: xdebug mask is 0x1
Config read from file /Users/fractal/.gnokiirc.
Lockfile /var/lock/LCK..cu.usbmodem431 is stale. Overriding it...
phone instance config:
model = AT
port = /dev/cu.usbmodem431
connection = serial
initlength = default
serial_baudrate = 9600
serial_write_usleep = -1
handshake = software
require_dcd = 0
smsc_timeout = 10
rfcomm_channel = 0
sm_retry = 120
Initializing AT capable mobile phone ...
Serial device: opening device /dev/cu.usbmodem431
Serial device: setting RTS to high and DTR to high
Message sent: 0x00 / 0x0004
41 54 5a 0d                                     | ATZ             
write: [ATZ<cr>]
read : [ATZ<cr><cr><lf>OK<cr><lf>]
Message received: 0x00 / 0x000a
02 41 54 5a 0d 0d 0a 4f 4b 0d                   |  ATZ   OK       
Received message type 00
Message sent: 0x00 / 0x0005
41 54 45 31 0d                                  | ATE1            
write: [ATE1<cr>]
read : [ATE1<cr><cr><lf>OK<cr><lf>]
Message received: 0x00 / 0x000b
02 41 54 45 31 0d 0d 0a 4f 4b 0d                |  ATE1   OK      
Received message type 00
Message sent: 0x00 / 0x000a
41 54 2b 43 4d 45 45 3d 31 0d                   | AT+CMEE=1       
write: [AT+CMEE=1<cr>]
read : [AT+CMEE=1<cr><cr><lf>OK<cr><lf>]
Message received: 0x00 / 0x0010
02 41 54 2b 43 4d 45 45 3d 31 0d 0d 0a 4f 4b 0d |  AT+CMEE=1   OK 
Received message type 00
Message sent: 0x06 / 0x0007
41 54 2b 47 4d 4d 0d                            | AT+GMM          
write: [AT+GMM<cr>]
read : [AT+GMM<cr><cr><lf>NEXPERIA SY.SOL 5209<cr><lf><cr><lf>OK<cr><lf>]
Message received: 0x06 / 0x0025
02 41 54 2b 47 4d 4d 0d 0d 0a 4e 45 58 50 45 52 |  AT+GMM   NEXPER
49 41 20 53 59 2e 53 4f 4c 20 35 32 30 39 0d 0a | IA SY.SOL 5209  
0d 0a 4f 4b 0d                                  |   OK            
Received message type 06
Message sent: 0x06 / 0x0008
41 54 2b 43 47 4d 49 0d                         | AT+CGMI         
write: [AT+CGMI<cr>]
read : [AT+CGMI<cr><cr><lf>NXP<cr><lf><cr><lf>OK<cr><lf>]
Message received: 0x06 / 0x0015
02 41 54 2b 43 47 4d 49 0d 0d 0a 4e 58 50 0d 0a |  AT+CGMI   NXP  
0d 0a 4f 4b 0d                                  |   OK            
Received message type 06
Message sent: 0x63 / 0x0009
41 54 2b 43 53 43 53 3f 0d                      | AT+CSCS?        
write: [AT+CSCS?<cr>]
read : [AT+CSCS?<cr><cr><lf>+CSCS: "GSM"<cr><lf><cr><lf>OK<cr><lf>]
Message received: 0x63 / 0x001f
02 41 54 2b 43 53 43 53 3f 0d 0d 0a 2b 43 53 43 |  AT+CSCS?   +CSC
53 3a 20 22 47 53 4d 22 0d 0a 0d 0a 4f 4b 0d    | S: "GSM"    OK  
Received message type 63
Initialisation completed
Message sent: 0x23 / 0x0009
41 54 2b 43 53 43 41 3f 0d                      | AT+CSCA?        
write: [AT+CSCA?<cr>]
read : [AT+CSCA?<cr><cr><lf>+CSCA:
"+447958879890",145<cr><lf><cr><lf>OK<cr><lf>]
Message received: 0x23 / 0x002d
02 41 54 2b 43 53 43 41 3f 0d 0d 0a 2b 43 53 43 |  AT+CSCA?   +CSC
41 3a 20 22 2b 34 34 37 39 35 38 38 37 39 38 39 | A: "+44795887989
30 22 2c 31 34 35 0d 0a 0d 0a 4f 4b 0d          | 0",145    OK    
Received message type 23
=====> ENTER gn_sms_send()
enc_chars: 22
ext_chars: 0
total: 20
size of the input string: 22 bytes
number of characters in the input string: 22 chars
=====> ENTER sms_send_single()
General Data Coding
Default Alphabet
        size: 20
        offset: 0
        encoded size: 20
        rawsms length: 22
        rawsms user data length: 20
dcs: 0x00
Length: 0x16
user_data_length: 0x14
ValidityIndicator: 2
user_data: 54747A0E4ACF416110BD3CA783DAE5F93C7C2E03
Input is 22 bytes long
SMS is 20 octets long
Sending
Message sent: 0x65 / 0x000a
41 54 2b 43 4d 47 46 3d 30 0d                   | AT+CMGF=0       
write: [AT+CMGF=0<cr>]
read : [AT+CMGF=0<cr><cr><lf>OK<cr><lf>]
Message received: 0x65 / 0x0010
02 41 54 2b 43 4d 47 46 3d 30 0d 0d 0a 4f 4b 0d |  AT+CMGF=0   OK 
Received message type 65
PDU mode set
imac:~ fractal$ 

... but now gnokii quits after setting PDU mode and doesn't even attempt to
send the sms?

Any ideas?

-- 
View this message in context: 
http://old.nabble.com/gnokii-smsd-not-giving-me-a-clue-as-to-why-it-is-not-sending-and-receiving-sms%27-tp34856997p34864564.html
Sent from the gnokii-users mailing list archive at Nabble.com.