Re: gnokii build problems on OS X ??

[Pawel Kot]

Hi,

On Sun, Dec 11, 2011 at 02:06, A Gough <address@hidden> wrote:
> I have built gnokii from the git repository with the following reported
> configuration :

So the subject is a bit misleading. I thought you have problems with
the compilation.

> When I run this build against a Nokia XpressMusic 5310 via Bluetooth I am
> able to get successful AT mode communication but not FBUS/OBEX based
> communication.
> Please see the attached  gnokii3.1run.rtf file with logs of my attemps.
>
> The Bluetooth port  configurations for the 2 types of runs are shown in the
> dialogue box below:

Sorry, there was some unreadable binary part in here.

When including the log, please include it in the plan text. That helps.

> Have I missed a configuration setting in the build or mis-configured the
> system in some other way?

Please note, that neither Daniele nor I (it's only us who maintain
gnokii these days) use Mac machines.

Series 40 run with Bluetooth address :
[...]
overrun: 1010 0
Serial device: opening device 00:1d:98:73:38:d9
2011-11-27 16:50:38.074 gnokii[19116:60f] *** __NSAutoreleaseNoPool():
Object 0x10060e1a0 of class NSCFData autoreleased with no pool in
place - just leaking
Segmentation fault

This does not look good? Are you able to backtrace? There are
instructions on wiki.

Series 40 run with Nokia PC Suite serial port :
model = series40
port = /dev/tty.Nokia310XpressMusic-CO
connection = bluetooth

That should be serial not bluetooth then.

take care,
-- 
Pawel Kot