[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

huawei e220 problem

From: ASTI Patron, Oliver L.
Subject: huawei e220 problem
Date: Wed, 30 Mar 2011 09:23:15 +0800



I am using Huawei e220 via USB.


Here is my config in .gnokiirc


                model = AT

                port = /dev/ttyUSB0

                connection = serial


I am using gnokii 0.6.30 and smsd from tarball.


Here is the gnokii --version result.

GNOKII Version 0.6.30

Copyright (C) Hugh Blemings <address@hidden>, 1999, 2000

Copyright (C) Pavel Janik ml. <address@hidden>, 1999, 2000

Copyright (C) Pavel Machek <address@hidden>, 2001

Copyright (C) Pawel Kot <address@hidden>, 2001-2009

Copyright (C) BORBELY Zoltan <address@hidden>, 2002

Copyright (C) Daniele Forsi <address@hidden>, 2004-2009

gnokii is free software, covered by the GNU General Public License, and you are

welcome to change it and/or distribute copies of it under certain conditions.

There is absolutely no warranty for gnokii.  See GPL for details.

Built 15:41:35 Mar  4 2011


Here is the smsd --version result.

smsd - version 1.4.5 from gnokii 0.6.30

Copyright  Jan Derfinak  address@hidden


Here is the result of the gnokii --identify.

GNOKII Version 0.6.30

IMEI         : xxxxxxxx3448620

Manufacturer : huawei

No flags section in the config file.

Model        : E156G

Product name : E156G

Revision     : 11.608.05.00.00


Here is the summary of the problem.

I have been using gnokii for quite sometime and never get this error. But right now I am having trouble on how to get this done.
The gnokii and smsd was used to Email2SMS alert for our team. But unfortunately the smsd stops because it cannot detect the huawei e220 anymore and I never remove it since I attached it to the usb port.


Here is the error of the smsd:


gnokii I/O error: Input/output error

lowlevel.c:461 error: 14, Device not ready.


But right after I disconnect and reconnect the huawei USB it is detected again. If I leave it connected the same thing will happen.

I cannot disconnect and reconnect it during week ends because gnokii and smsd is used for our alerts.


Please help me on this.


Thank you very much.


Oliver L. Patron


This message has been scanned for malware by Websense.

reply via email to

[Prev in Thread] Current Thread [Next in Thread]